FORM 10-K
Table of Contents

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington D.C. 20549

FORM 10-K

 

þ Annual report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

for the fiscal year ended January 1, 2011

or

 

¨ Transition report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

for the transition period from                      to                     .

Commission file number 0-27598

IRIDEX CORPORATION

(Exact name of registrant as specified in its charter)

 

Delaware   77-0210467
(State or other jurisdiction   (I.R.S. Employer
of incorporation or organization)   Identification Number)

1212 Terra Bella Avenue, Mountain View CA 94043-1824

(Address of principal executive offices) (Zip Code)

(650) 940-4700

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

 

Title of Each Class

 

Name of Each Exchange on which Registered

Common   NASDAQ Global Market

Securities registered pursuant to Section 12(g) of the Act:

Common Stock, par value $0.01 per share

Indicate by check mark if the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act of 1933.    Yes  ¨    No  þ

Indicate by check mark if the Registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Securities Exchange Act of 1934 (the “Exchange Act”).    Yes  ¨    No  þ

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  þ    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  ¨    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (Section 229.405 of this chapter) is not contained herein, and will not be contained, to the best of Registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.    ¨

Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer, or a smaller reporting company. See definition of “accelerated filer,” “large accelerated filer,”, and smaller reporting company in Rule 12b-2 of the Exchange Act.

Large accelerated filer  ¨             Accelerated filer  ¨             Non-accelerated filer  ¨             Smaller reporting company  þ

Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨    No  þ

The aggregate market value of the voting common equity held by non-affiliates of the Registrant was approximately $16,427,514, as of July 3, 2010 the last business day of the Registrant’s most recently completed second fiscal quarter, based on the closing price reported for such date on the NASDAQ Global Market. The registrant did not have any non-voting common equity outstanding. For purposes of this disclosure, shares of common stock held by each executive officer and director and by each holder of 5% or more of the outstanding shares of common stock have been excluded from this calculation, because such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.

As of March 17, 2011, Registrant had 8,911,840 shares of common stock outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Certain parts of the Proxy Statement for the Registrant’s 2011 Annual Meeting of Stockholders (the “Proxy Statement”) are incorporated by reference into Part III of this Annual Report on Form 10-K.

 

 

 


Table of Contents

Table of Contents

 

         Page No.  

Part I

    

Item 1.

 

Business

     3   

Item 1A.

 

Risk Factors

     14   

Item 1B.

 

Unresolved Staff Comments

     25   

Item 2.

 

Properties

     25   

Item 3.

 

Legal Proceedings

     25   

Item 4.

 

(Removed and Reserved)

     26   

Part II

    

Item 5.

 

Market for Registrant’s Common Equity and Related Stockholder Matters, and Issuer Purchases of Equity Securities

     27   

Item 6.

 

Selected Financial Data

     27   

Item 7.

 

Management’s Discussion and Analysis of Financial Condition and Results of Operations

     27   

Item 7A.

 

Quantitative and Qualitative Disclosures About Market Risk

     35   

Item 8.

 

Financial Statements and Supplementary Data

     35   

Item 9.

 

Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

     59   

Item 9A.

 

Controls and Procedures

     59   

Item 9B.

 

Other Information

     60   

Part III

    

Item 10.

 

Directors, Executive Officers and Corporate Governance

     61   

Item 11.

 

Executive Compensation

     61   

Item 12.

 

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

     61   

Item 13.

 

Certain Relationships and Related Transactions, and Director Independence

     61   

Item 14.

 

Principal Accountant Fees and Services

     61   

Part IV

    

Item 15.

 

Exhibits, Financial Statement Schedules and Reports on Form 8-K

     62   

Signatures

     66   

 

2


Table of Contents

PART I

This Annual Report on Form 10-K contains certain forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended, such as statements relating to levels of future sales and operating results; gross margins; managing cash flows; general economic conditions and levels of international sales, and our current and future liquidity and capital requirements; market acceptance of our products; expectations for and sources of future revenues; leveraging our core business and increasing recurring revenues; broadening our product lines through product innovation and new treatments; our marketing programs and trends in healthcare; our ability to take advantage of economies-of-scale in product development and manufacturing; efforts to decrease costs; estimates regarding the size of our markets; levels of future investment in research and development efforts; our ability to develop and introduce new products through strategic alliances, OEM relationships and acquisitions; the availability of components from third-party manufacturers; results of clinical studies and the status of our regulatory clearance; the impact of regulatory actions and determinations; and risks associated with bringing new products to market. In some cases, forward-looking statements can be identified by terminology, such as “may,” “will,” “should,” “expects,” “plans,” “anticipates,” “believes,” “estimates,” “predicts,” “intends,” “potential,” “continue,” or the negative of such terms or other comparable terminology. These statements involve known and unknown risks, uncertainties and other factors which may cause our actual results, performance or achievements to differ materially from those expressed or implied by such forward-looking statements. The reader is strongly urged to read the information contained under the captions “Item 1A. Risk Factors - Factors That May Affect Future Results” in this Annual Report on Form 10-K for a more detailed description of these significant risks and uncertainties. The reader is cautioned not to place undue reliance on these forward-looking statements, which reflect management’s analysis only as of the date of this Form 10-K. We undertake no obligation to update such forward-looking statements to reflect events or circumstances occurring after the date of this report.

 

Item 1. Business

General

IRIDEX Corporation is a leading worldwide provider of therapeutic based laser systems, delivery devices and consumable instrumentation used to treat eye diseases in ophthalmology and skin conditions in dermatology (also referred to as aesthetics). Our products are sold in the United States predominantly through a direct sales force and internationally through approximately 100 independent distributors in 107 countries. Total revenues in 2010, 2009 and 2008 were $43.7 million, $43.2 million and $48.5 million, respectively. In 2010 and 2009, we generated net income of $3.0 million and $2.6 million, respectively, whereas we incurred net loss of $7.4 million in 2008. The net loss for 2008 included impairment charges for the write down of Goodwill and Intangible assets of $5.3 million.

Our ophthalmology products consist of laser systems, delivery devices and consumable instrumentation including laser probes and are used in the treatment of serious eye diseases, including the three leading causes of irreversible blindness: diabetic retinopathy, glaucoma and age-related macular degeneration (AMD). In addition, our ophthalmology products are often used in vitrectomy procedures (used to treat proliferative diabetic retinopathy, macular holes, retinal tears and detachments) which are generally performed in the operating room and require a consumable single use intraocular laser probe (EndoProbe) to deliver light to the back of the eye together with other instrumentation. Therefore our ophthalmology business includes (i) a recurring revenue component, which consists of the sales of the consumable, single use EndoProbe devices and other instrumentation, combined with the repair, servicing and extended service contract protection for our laser systems and (ii) a capital component, which consists of the laser systems combined with durable delivery devices. Our laser systems consist of our IQ products which include IQ 532, IQ 577 and IQ 810 laser photocoagulation systems and our OcuLight products including OcuLight TX, OcuLight Symphony (Laser Delivery System), OcuLight SL, OcuLight SLx, OcuLight GL and OcuLight GLx laser photocoagulation systems. Our ophthalmology products contributed $32.3 million, $31.0 million and $32.4 million to our total revenues in 2010, 2009 and 2008, respectively.

Our aesthetics products consist of laser systems and handpieces that focus on the treatment of pigmented and vascular lesions, skin rejuvenation, skin tightening, hair reduction, leg veins, and acne. Our aesthetics products include the VariLite, DioLite XP, Gemini, Aura-i, Lyra-i, and Venus-i Laser Systems. Our aesthetics products are primarily used in a dermatologist’s or plastic surgeon’s offices and contributed $11.4 million, $12.2 million and $16.1 million to our total revenues in 2010, 2009 and 2008, respectively.

While dermatologists almost always use our laser systems in their offices or clinics, ophthalmologists and plastic surgeons typically use our laser systems in hospital operating rooms (OR) and ambulatory surgical centers (ASC), as well as their offices and clinics. In the OR and ASC, ophthalmologists use our laser systems with either an indirect laser ophthalmoscope or a consumable, single use EndoProbe. Since our first shipment in 1990, more than 10,000 medical laser systems manufactured by IRIDEX, for both ophthalmology and dermatology, have been sold worldwide.

 

3


Table of Contents

IRIDEX Corporation was incorporated in California in February 1989 as IRIS Medical Instruments, Inc. In November 1995, we changed our name to IRIDEX Corporation and reincorporated in Delaware. Our executive offices are located at 1212 Terra Bella Avenue, Mountain View, California 94043-1824, and our telephone number is (650) 940-4700. We can also be reached at our website at www.IRIDEX.com, however, the information on, or that can be accessed through, our website is not part of this report. As used in this Annual Report on Form 10-K, the terms “Company,” “IRIDEX,” “we,” “us” and “our” refer to IRIDEX Corporation, a Delaware corporation, and when the context so requires, our wholly owned subsidiaries, IRIS Medical Instruments, Inc. and Light Solutions Corporation, both California corporations, and IRIDEX UK, and IRIDEX France S.A.

The IRIDEX Strategy

We are one of the worldwide leaders in developing, manufacturing, marketing, selling and servicing innovative medical laser systems and associated instrumentation. At the beginning of 2008 we set out a three stage plan: (a) to return to positive cash flows; (b) drive for profitability; and (c) position ourselves for growth. Over the last three years we have successfully executed our turnaround strategy. Our initial focus was on cash generation to pay off debt and return the Company to a sound financial footing by strengthening our balance sheet. We ended 2010 with $9.0 million in cash and no debt outstanding. We then concentrated on returning to profitability and have recorded eight consecutive quarters of profitability through the end of fiscal year 2010. We are now focused on growing our business.

Key elements to our growth strategy are:

 

  1. Leverage existing distribution channels to drive more recurring revenues by adding additional consumable devices for our current ophthalmology market.

 

  2. Introduce new complementary laser systems and durable delivery devices which either encourage replacement of the existing installed base, or expand the installed base by identifying new procedures or capabilities. We intend to continue our investment in research and development to improve the performance of our systems by developing innovative technologies which can address the customer needs.

 

  3. These actions will consist of organic initiatives supplemented by acquisitions.

See Item 1A. Risk Factors – Factors That May Affect Future Results – “Efforts to acquire additional companies or product lines may divert our managerial resources away from our business operations, and if we complete additional acquisitions, we may incur or assume additional liabilities or experience integration problems.” and “Our Future Success Depends on Our Ability to Develop and Successfully Introduce New Products and New Applications.”

Ophthalmic Products

We utilize a systems approach to product design. Each system includes a console, which generates the laser energy, and a number of interchangeable peripheral delivery devices for use in specific clinical applications. This approach allows our customers to purchase a basic console system and add additional delivery devices as their needs expand or as new applications develop. We believe that this systems approach is our distinguishing characteristic and also brings economies-of-scale to our product development and manufacturing efforts because individual applications do not require the design and manufacture of complete stand-alone products. Our primary equipment products range in price from $2,000 to $50,000, and consist of laser consoles and specialized durable delivery devices. Our line of consumable products has list prices of between $80 and $200 to end customers.

Consoles

Our laser consoles, which are identified below, incorporate the economic and technical benefits of solid state and semiconductor laser technology.

Infrared Photocoagulator Consoles. The OcuLight and IQ 810 photocoagulator consoles used by ophthalmologists are available in two infrared (810nm) output power ranges: the OcuLight SL at 2 Watts and the IQ 810 and OcuLight SLx at 3 Watts. The OcuLight consoles weigh 14 pounds and have dimensions of 4”H x 12”W x 12”D. The IQ 810 console weighs 11 pounds and has dimensions of 7”H x 12”W x 12”D. Neither requires external air nor water cooling. We believe that the smaller overall sizes, lower weights and low input power requirements to operate represent distinct advantages over competing products.

 

4


Table of Contents

Visible (Green) Photocoagulator Consoles. Our OcuLight TX, OcuLight GL and OcuLight GLx solid state and semiconductor- based photocoagulator consoles used in ophthalmology deliver visible (532nm) laser light. The OcuLight TX was first shipped in late 2006 and offers an optional remote control and wireless power-adjust footswitch. The OcuLight TX/GL/GLx have dimensions of 6”H x 12”W x 12”D, draw a maximum of 300 Watts of wall power and requires no water cooling. In 2010 we introduced the IQ 532nm photocoagulator. This product ultilizes the user interface and product platform based on the IQ 577 as more fully described below.

Visible (Yellow) Photocoagulator Console. In 2009 we introduced the industry’s first solid state 577nm (yellow) photocoagulator - the IQ 577. This product utilizes state of the art user interface technology and delivers a 577 wavelength which is at the peak of oxyhemoglobin absorption which allows ophthalmologists to obtain optimal results with lower power (more tissue sparing) compared with green wavelengths. The IQ 577 console weighs 18 pounds, has dimensions of 7.5”H x 12”W x 14”D, draws a maximum of 250 Watts of wall power, requires no water cooling, and has a remote control and wireless footswitch.

Multi-wavelength Laser System Configurations. When used in conjunction with specific IRIDEX laser consoles, our Symphony slit lamp adapters can deliver multiple laser wavelengths from a single slit lamp installation. It combines the clinical versatility and convenience of multiple wavelength delivery into one delivery device for retinal and glaucoma procedures. Currently, our compatible consoles are the OcuLight GLx and the OcuLight Tx green laser consoles and the OcuLight SLx and the IQ 810 infrared laser consoles and the IQ 577 yellow laser console.

Ophthalmic Delivery Devices

Our versatile family of consoles and delivery devices has been designed to accommodate the addition of new capabilities with a minimal incremental investment. Users of our consoles can add capabilities by simply purchasing new interchangeable delivery devices and utilizing them with their existing console. We have developed both consumable and durable delivery devices and expect to continue to develop additional delivery devices.

TruFocus Laser Indirect Ophthalmoscope (LIO). The indirect ophthalmoscope is designed to be worn on the physician’s head and to be used in procedures to treat peripheral retinal disorders, particularly in infants or adults requiring treatment in the supine position. This product can be used in both diagnosis and treatment procedures at the point-of-care.

Slit Lamp Adapter (SLA). These adapters allow the physician to utilize a standard slit lamp in both diagnosis and treatment procedures. Doctors can install a slit lamp adapter in a few minutes and convert standard diagnostic slit lamps into a therapeutic photocoagulator delivery system. Slit lamp adapters are used in treatment procedures for both retinal diseases and glaucoma. These devices are available in a wide variety of spot diameters. Our standard slit lamp adapters have a single fiber and deliver laser light from a single laser console. Our Symphony slit lamp adapter has multiple fibers and can deliver laser light from two compatible laser consoles.

Operating Microscope Adapter. These adapters allow the physician to utilize a standard operating microscope in both diagnosis and laser treatment procedures. These devices are similar to slit lamp adapters, except that they are oriented horizontally and therefore can be used to deliver retinal photocoagulation to a supine patient.

EndoProbe. Our EndoProbe fiber optic delivery devices are used for endophotocoagulation, a retinal treatment procedure performed in the hospital operating room or surgery center during a vitrectomy procedure. These sterile consumable disposable probes are available in tapered, angled, stepped, aspirating, illuminating, and adjustable styles.

G-Probe. The G-Probe is used in procedures to treat medically and surgically uncontrolled glaucoma, in many instances replacing cyclocryotherapy, or freezing of eye tissues. The G-Probe’s non-invasive procedure takes approximately ten minutes, is performed on an anesthetized eye in the doctor’s office, and results in less pain and fewer adverse side effects than cyclocryotherapy. The G-Probe is a sterile consumable product.

DioPexy Probe. The DioPexy Probe is a hand-held instrument which is used in procedures to treat retinal tears, and breaks non-invasively through the sclera, as an alternative method of attaching the retina. Our DioPexy Probe results in increased precision, less pain and less inflammation than traditional cryotherapy.

 

5


Table of Contents

Ophthalmology Treatments

The following chart lists the procedures for treating ophthalmic diseases that can be addressed by utilizing our ophthalmic laser systems. These procedures typically are performed in an OR or an ASC and are non-elective and covered by insurance.

 

    

Procedure

   Console    Delivery Devices
Age-related Macular    Retinal    Infrared & Visible    Slit Lamp Adapter
Degeneration    Photocoagulation      
Diabetic Retinopathy         

Macular Edema

  

Grid Retinal

Photocoagulation

   Infrared & Visible    Slit Lamp Adapter &

Operating Microscope

Adapter,

   Focal Retinal Photocoagulation    Visible
   Slit Lamp Adapter

Proliferative

  

Pan-Retinal

Photocoagulation

Vitrectomy

Procedure

   Infrared & Visible    Slit Lamp Adapter,

Operating

Microscope Adapter,

Laser

Indirect

Ophthalmoscope,
EndoProbe*

Glaucoma         

Primary Open-Angle

   Trabeculoplasty    Infrared & Visible    Slit Lamp Adapter

Angle-closure

   Iridotomy    Infrared & Visible    Slit Lamp Adapter

Uncontrolled Glaucoma

   Transscleral Cyclophotocoagulation    Infrared    G-Probe*
Retinal Tears and Detachments   

Retinopexy Retinal Photocoagulation

Vitrectomy

Procedure

   Infrared & Visible    Slit Lamp Adapter, Laser
Indirect Ophthalmoscope,
Operating Microscope
Adapter, EndoProbe*
   Transscleral Retinal Photocoagulation    Infrared
   DioPexy Probe
Retinopathy of Prematurity   

Retinal

Photocoagulation

   Infrared    Laser Indirect
Ophthalmoscope
Ocular Tumors   

Retinal

Photocoagulation

   Infrared    Slit Lamp Adapter,
Operating

Microscope Adapter, Laser

Indirect Ophthalmoscope

Macular Holes    Vitrectomy Procedure    Visible    EndoProbe*

 

* Consumable single use products

Aesthetics Products

Although light-based products are used in a variety of aesthetics applications, our aesthetics business focuses primarily on pigmented and vascular lesions, skin rejuvenation, skin tightening, hair reduction, leg veins, and acne, treatments that make up three-quarters of all aesthetics laser procedures.

Consoles

Our aesthetics laser consoles, which are described below, incorporate high powered solid state and semi-conductor technology.

Combination Infrared/Visible wavelength laser consoles: This includes the Gemini and VariLite.

 

6


Table of Contents

The Gemini combines the best features of the Lyra and Aura systems, resulting in one of the most comprehensive and versatile multi-use systems available. It is FDA-cleared for use in 21 different aesthetics applications. It is one of the few dual wavelength lasers on the market, offering 532 nm KTP and 1064 nm Nd:YAG laser wavelengths. The KTP is a fast, high power laser used for skin rejuvenation and treatment of acne, pigmented lesions and other shallow vascular lesions. The Nd:YAG allows for deeper penetration and is used for hair reduction, wrinkle reduction, and the treatment of leg veins and other lesions.

The VariLite is a unique product in the aesthetics business. It includes both 532 nm and 940 nm lasers, which are used for deeper and more recalcitrant vascular lesions that are not easily treated with 532 nm. The 940nm wavelength is also more effective on venous lakes than 532 nm lasers.

Visible (Green) Consoles. The DioLite XP and Aura-i deliver (532 nm) laser light. These lasers deliver from three watts to 20 watts of power that is used for 14 FDA cleared applications ranging from vascular and pigmented lesions to acne.

Infrared Consoles: This includes the Lyra-i and Venus-i Laser System.

The Lyra-i uses a 1064 nm wavelength. This wavelength penetrates deeply into the skin to reach the hair bulb, leg veins, and the papillary dermis. It is used to treat 11 FDA cleared applications.

The Venus-i Laser System is a portable, lightweight, high power Erbium:YAG laser system for skin resurfacing. It provides treatment for wrinkles and moderate sun damage, and can be used on both facial and non-facial skin. Its unique flat beam profile maintains consistent laser energy in the therapeutic range and avoids dangerous hot spots. It is roughly half the size and weight of most other Erbium systems currently available.

Aesthetics Delivery Devices

VersaStat-i and VersaStat 10 mm Handpieces. These handpieces are used on the Gemini, Aura-i and Lyra-i consoles. The VersaStat-i has an adjustable spot size that allows the physician to match the spot size to the treatment area. It is adjustable from 1 mm to 5 mm in 0.1 mm increments. The handpiece treats a wide range of conditions, including small telangictasias and large blue veins without the need to change handpieces. The VersaStat 10 mm Handpiece allows the physician the ability to treat larger areas, adding to speed and efficiency of treatments. Both handpieces offer contact cooling, which allows for increased patient comfort during treatments.

Dermastat Handpieces. These handpieces are used with the Gemini and Aura-i. They are used as tracing instruments for the treatment of small cutaneous surface lesions, typically vascular, such as telangiectasia.

DioLite Handpieces. These handpieces are handheld instruments used in the treatment of vascular and pigmented skin lesions. These devices are available in 200, 500, 700, and 1,000 micron spot diameters.

VariLite Handpiece. The VariLite Handpiece is a handheld instrument used in the treatment of vascular, pigmented cutaneous skin lesions and small area hair reduction. Ergonomic handpieces can be used with both the 532 nm and 940 nm wavelengths and are available in 700, 1,000, 1,400, 2,000 and 2,800 micron spot diameter.

ScanLite Scanner. The ScanLite XP is a computer pattern generator with integrated controls designed to enhance the capabilities of the DioLite XP and VariLite systems. They allow rapid and uniform treatment of larger-area vascular and pigmented skin lesions.

Aesthetics Treatments

The following chart lists the procedures for treating skin diseases that can be addressed by utilizing our dermatology laser systems. These procedures are normally performed in a physician’s office and are elective and private pay.

 

7


Table of Contents

Condition

  

Procedure

   Console   

Delivery Devices

Vascular Lesions

Pigmented Lesions

Cutaneous Lesions

Acne

Skin Rejuvenation

Hair Reduction

   Selective Photothermolysis    Visible   

DioLite Handpiece

Versastat-i

Versastat 10 mm

Dermastat

ScanLite

VariLite Handpiece

Leg Veins

Hair Reduction

   Selective Photothermolysis    Infrared   

Versastat-i

Versastat 10 mm

Wrinkle Reduction

Scars

Acne Scar Reduction

   Skin Resurfacing    Infrared    Articulated Arm

Research and Development

We have close working relationships with researchers, clinicians and practicing physicians around the world who provide new ideas, test the feasibility of these new ideas and assist us in validating new products and new applications before they are introduced.

Our research and development (R&D) activities are performed by a current team of 17 engineers, scientists and regulatory professionals with experience in various aspects of medical products, laser systems, delivery devices and clinical techniques with a focus to introduce innovative products which satisfy the unmet and emerging needs of our customers. The core competencies of the team include: mechanical engineering, electrical engineering, optics, lasers, fiber optics, software, firmware and delivery devices. The research and development process integrates all the necessary disciplines of the Company from product inception through customer acceptance. This process facilitates reliable new product innovations and a consistent pipeline of innovative products for our customers.

Our research activities are managed internally by our research staff. We supplement our internal research staff by hiring consultants and/or partnering with physicians to gain specialized expertise and understanding. Research efforts are directed toward the development of new products and new applications for our existing products, as well as the identification of markets not currently addressed by our products.

We believe that it is important to make a substantial contribution to improving clinical outcomes. For instance we have made substantial investments in researching and improving the treatment of serious eye diseases such as age-related macular degeneration, diabetic retinopathy and glaucoma. The objectives of developing new treatments and applications are to expand the potential patient population, to more effectively treat diseases, to treat patients earlier in the treatment regimen and to reduce the side effects of treatment. We spent $3.8 million on research and development in 2010, $3.6 million in 2009 and $4.0 million in 2008.

We consider clinical projects to be a component of our research and development efforts and they may or may not result in additional commercial opportunities. See Item 1A. Risk Factors - Factors That May Affect Future Results - “While We Devote Significant Resources to Research and Development, Our Research and Development May Not Lead to New Products that Achieve Commercial Success”

Customers and Customer Support

Our products are currently sold to ophthalmologists - particularly those specializing in retina, glaucoma and pediatrics -  dermatologists and plastic surgeons. Other customers include research and teaching hospitals, government installations, surgical centers and hospitals. No single customer or distributor accounted for 10% or more of total sales in fiscal years 2010, 2009 and 2008.

We are continuing our efforts to broaden our customer base through the development of new products and new applications of our existing products for use by ophthalmologists and dermatologists. We currently estimate that there are approximately 18,000 ophthalmologists in the United States and 55,000 internationally who are potential customers. Additionally, we estimate that there are approximately 5,000 and 18,000 hospitals in the United States and internationally, respectively, as well as approximately 5,000 ambulatory surgical centers in the United States which potentially represent multiple unit sales. We believe there are approximately 12,000 dermatologists and approximately 9,000 plastic surgeons in the United States who are potential customers. Because independent ophthalmologists and dermatologists frequently practice at their own offices, as well as through affiliations with hospitals or other medical centers, each independent ophthalmologist, dermatologist, plastic surgeon, office, hospital and medical center is a potential customer for our products.

 

8


Table of Contents

We seek to provide superior customer support and service and believe that our customer service and technical support distinguish our product offerings from those of our competitors. We provide depot service at our Mountain View facility for our ophthalmology and small aesthetics products and we provide field service for our large aesthetics products we acquired in the Laserscope acquisition. Our customer support representatives assist customers with orders, warranty returns and other administrative functions. Our technical support engineers provide customers with answers to technical and product-related questions. We maintain an “around-the-clock” telephone service line to service our customers. If a problem with a depot serviceable product cannot be diagnosed and resolved by telephone, a service loaner is shipped overnight to domestic customers under warranty or service contract, and by the most rapid delivery means available to our international customers, and the problem unit is returned to us. The small size and rugged design of our products allows for economical shipment and quick response to customers almost anywhere in the world.

Sales and Marketing

We sell and market our products in the United States predominantly through our direct sales force. Our direct sales force is separated into two separate divisions, one for ophthalmology and one for aesthetics. In total we had a direct sales force of 17 employees who were engaged in sales efforts within the United States as of January 1, 2011 with 11 sales representatives focused on our Ophthalmology products. Our sales and marketing organization is based at our corporate headquarters in Mountain View, California with area sales managers located throughout the United States.

We sell and market our products internationally through approximately 100 independent distributors into over 107 countries. International sales represented 44.8%, 42.1% and 44.4% of our sales in 2010, 2009 and 2008, respectively. We believe that our international sales will continue to represent a significant portion of our revenues for the foreseeable future. We have two wholly owned subsidiaries, one located in France and the other in the UK. Our subsidiaries are responsible for selling, marketing and servicing our aesthetics products in their local geography. In June 2008, we transitioned the responsibility for the sales and service of our aesthetics products in the UK to an independent distributor. Our other international sales are made principally to customers in Europe, Asia, the Pacific Rim, the Middle East and Latin America. Our indirect international sales are administered through our corporate headquarters in Mountain View, California. Our distribution agreements with our international distributors are generally exclusive and typically can be terminated by either party without cause with 90 days notice. International sales may be adversely affected by the imposition of governmental controls, currency fluctuations, restrictions on export technology, political instability, trade restrictions, changes in tariffs and the economic condition in each country in which we sell our products. See Item 1A. Risk Factors - Factors That May Affect Future Results - “We Depend on International Sales for a Significant Portion of Our Operating Results.”

To support our sales process we conduct marketing programs which include: clinical education, direct mail, trade shows, public relations, market research, and advertising in trade and academic journals and newsletters. We participate in over 100 trade shows worldwide on an annual basis. These meetings allow us to present our products to existing and prospective buyers.

Through marketing, we collaborate with our customers to identify new products and applications which help meet their unmet needs , which in turn: provides us with new product concepts, enhances our ability to identify new applications for our products and validates new procedures using our products. Customers include key opinion leaders who are often the heads of the departments in which they work or professors at universities. We believe that these luminaries in the field of ophthalmology and dermatology are key to the successful introduction of new products and the subsequent acceptance of these new products by the general market. Acceptance of our products by these early adopters is key to our strategy in the validation and commercialization of our new products.

Operations

The manufacture of our infrared and visible light photocoagulators and the related delivery devices is a highly complex and precise process. Completed systems must pass quality control and reliability tests before shipment. Our manufacturing activities consist of specifying, sourcing, assembling and testing of components and certain subassemblies for assembly into our final product. As of January 1, 2011, we had a total of 49 employees engaged in manufacturing activities.

The medical devices manufactured by us are subject to extensive regulation by numerous governmental authorities, including federal, state, and foreign governmental agencies. The principal regulator in the United States is the Food and Drug Administration (FDA). In April 1998, we received certification for ISO 9001/EN 46001, which is an international quality system standard that documents compliance to the European Medical Device Directive. In February 2004, we were certified to ISO 13485:2003, which replaced ISO 9001/EN46001 as the international standard for quality systems as applied to medical devices. In August 2008, we received FDA 510(k) clearance on our family of IRIDEX IQ Laser Systems. This clearance covers the IRIDEX IQ 532, IQ 577, IQ 630-670, and IQ 810 Laser Systems and their associated delivery devices to deliver laser energy in either CW-Pulse, MicroPulse or LongPulse mode. These laser systems are intended for a wide range of specific applications in the medical specialties of ophthalmology, ear, nose and throat (ENT)/otolaryngology and dermatology.

 

9


Table of Contents

We rely on third parties to manufacture substantially all of the components used in our products, although we assemble critical subassemblies and the final product at our facility in Mountain View, California. Some of these suppliers and manufacturers are sole source. We have some long-term or volume purchase agreements with our suppliers but currently purchase most components on a purchase order basis. These components may not be available in the quantities required, on reasonable terms, or at all. Financial or other difficulties faced by our suppliers or significant changes in demand for these components or materials could limit their availability. Any failures by our third party suppliers to adequately perform may delay the submission of products for regulatory approval, impair our ability to deliver products on a timely basis or otherwise impair our competitive position. See Item 1A. Risk Factors -  Factors That May Affect Future Results - “We Depend on Sole Source or Limited Source Suppliers.”

International regulatory bodies often establish varying product standards, packaging requirements, labeling requirements, tariff regulations, duties and tax requirements. As a result of our sales in Europe, we are required to have all products “CE” marked, an international symbol affixed to all products demonstrating compliance to the European Medical Device Directive and all applicable standards. In July 1998, we received CE mark certification under Annex II guidelines, the most stringent path to CE certification. With Annex II CE mark certification, we have demonstrated our ability to both understand and comply with all applicable standards under the European Medical Device Directive. This allows us to CE mark any product upon our internal verification of compliance to all applicable European standards. Currently, all released products are CE marked. Continued certification is based on successful review of the process by our European Registrar during its annual audit. Any loss of certification would have a material adverse effect on our business, results of operations and financial condition. See Item 1A. Risk Factors - Factors That May Affect Future Results – “We Are Subject to Government Regulations Which May Cause Us to Delay or Withdraw the Introduction of New Products or New Applications for Our Products.”

Competition

Competition in the market for laser systems and delivery devices used for ophthalmic and aesthetics treatment procedures is intense and is expected to increase. This market is also characterized by rapid technological innovation and change. We compete by providing features and services that are valued by our customers such as: product performance, clinical outcomes, ease of use, durability, versatility, customer training services and rapid repair of equipment.

Our principal competitors in ophthalmology are Alcon Inc., Carl Zeiss Meditec AG, Nidek Co. Ltd, Synergetics, Topcon Corporation, Ellex Medical Lasers, Ltd. and Lumenis Ltd. Most of these companies currently offer a competitive, semiconductor-based laser system for ophthalmology. Also within ophthalmology, pharmaceutical alternative treatments for AMD such as Lucentis/Avastin (Genentech), and to a lesser extent Visudyne (Novartis) and Macugen (OSI Pharmaceuticals) compete rigorously with traditional laser procedures.

In aesthetics our principal competitors are Cutera, Syneron, Palomar Technologies, Inc., Sciton, Lumenis Ltd. and Cynosure.

Some ophthalmic and aesthetic competitors have substantially greater financial, engineering, product development, manufacturing, marketing and technical resources than we do. Some companies also have greater name recognition than us and long-standing customer relationships. In addition, other medical companies, academic and research institutions, or others, may develop new technologies or therapies, including medical devices, surgical procedures or pharmacological treatments and obtain regulatory approval for products utilizing such techniques that are more effective in treating the conditions targeted by us, or are less expensive than our current or future products. Our technologies and products could be rendered obsolete by such developments. Any such developments could have a material adverse effect on our business, financial condition and results of operations. See Item 1A. Risk Factors - Factors That May Affect Future Results - “We Face Strong Competition in Our Markets and Expect the Level of Competition to Grow in the Foreseeable Future.”

Patents and Proprietary Rights

Our success and ability to compete is dependent in part upon our proprietary information. We rely on a combination of patents, trade secrets, copyright and trademark laws, nondisclosure and other contractual agreements and technical measures to protect our intellectual property rights. We file patent applications to protect technology, inventions and improvements that are significant to the development of our business. We have been issued twenty six United States patents and twelve foreign patents on the technologies related to our products and processes, which have expiration dates ranging from 2013 to 2028. We have approximately six pending patent applications in the United States and seven foreign pending patent applications that have been filed. Our patent applications may not be approved.

As a result of our 2007 acquisition of AMS/Laserscope aesthetic products, we acquired a royalty-free license to eleven of the AMS/Laserscope patents and a license to a Palomar patent under which royalties are paid to Palomar based upon a percentage of sales of certain products acquired from AMS/Laserscope.

 

10


Table of Contents

As a result of our 2010 acquisition of RetinaLabs ophthalmology products we acquired five RetinaLab patents.

In addition to patents, we rely on trade secrets and proprietary know-how which we seek to protect, in part, through proprietary information agreements with employees, consultants and other parties. Our proprietary information agreements with our employees and consultants contain provisions requiring such individuals to assign to us, without additional consideration, any inventions conceived or reduced to practice by them while employed or retained by us, subject to customary exceptions - See Item 1A. Risk Factors - Factors That May Affect Future Results - “We Rely on Patents and Proprietary Rights to Protect our Intellectual Property and Business.”

Government Regulation

The medical devices to be marketed and manufactured by us are subject to extensive regulation by numerous governmental authorities, including federal, state, and foreign governmental agencies. Pursuant to the Federal Food, Drug, and Cosmetic Act, as amended, and the regulations promulgated thereunder (the “FDA Act”), the FDA serves as the principal federal agency within the United States with authority over medical devices and regulates the research, clinical testing, manufacture, labeling, distribution, sale, marketing and promotion of such devices. Noncompliance with applicable requirements can result in, among other things, warning letters, fines, injunctions, civil penalties, recall or seizures of products, total or partial suspension of production, failure of the government to grant pre-market clearance or approval for devices, withdrawal of marketing approvals, and criminal prosecution. The FDA also has the authority to request repair, replacement or refund of the cost of any medical device manufactured or distributed by us.

In the United States, medical devices are classified into one of three classes (Class I, II or III). The class to which the device is assigned determines, among other things, the type of pre-marketing submission/application required for FDA clearance to market. If the device is classified as Class I or II, and if it is not exempt, a 510(k) pre-market notification will be required for marketing. Under FDA regulations, Class I devices are subject to general controls (for example, labeling, pre-market notification and adherence to Quality System Regulations (“QSRs”) requirements). Class II devices receive marketing clearance through a 510(k) pre-market notification. For Class III devices, a pre-market approval (PMA) application will be required unless the device is a pre-amendments device (on the market prior to the passage of the medical device amendments in 1976, or substantially equivalent to such a device) and PMAs have not been called for. In that case, a 510(k) will be the route to market. A 510(k) clearance will be granted if the submitted information establishes that the proposed device is “substantially equivalent” to a legally marketed Class I or II medical device, or to a Class III medical device for which the FDA has not called for a PMA. The FDA may determine that a proposed device is not substantially equivalent to a legally marketed device, or that additional information or data are needed before a substantial equivalence determination can be made. A request for additional data may require that clinical studies of the device’s safety and efficacy be performed.

Commercial distribution of a device for which a 510(k) notification is required can begin only after the FDA issues an order finding the device to be “substantially equivalent” to a previously cleared device. The FDA has recently been requiring a more rigorous demonstration of substantial equivalence than in the past. Even in cases where the FDA grants a 510(k) clearance, it can take the FDA between three and six months from the date of submission to grant a 510(k) clearance, but it may take longer.

A “not substantially equivalent” determination, or a request for additional information, could delay the market introduction of new products that fall into this category and could have a materially adverse effect on our business, financial condition and results of operations. For any of our products that are cleared through the 510(k) process, such as our IQ 810 system, modifications or enhancements that could significantly affect the safety or efficacy of the device or that constitute a major change to the intended use of the device will require new 510(k) submissions.

We have obtained 510(k) clearances for all of our marketed products. We have also modified aspects of our products since receiving regulatory clearance, but we believe that new 510(k) clearances are not required for these modifications. After a device receives a 510(k) clearance or a PMA, any modification that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, will require a new clearance or approval. The FDA requires each manufacturer to make this determination initially, but the FDA can review any such decision and can disagree with a manufacturer’s determination. If the FDA disagrees with our determination not to seek a new 510(k) clearance or PMA, the FDA may retroactively require us to seek 510(k) clearance or pre-market approval. The FDA could also require us to cease marketing and distribution and/or recall the modified device until a 510(k) clearance or a PMA approval is obtained. Also, in these circumstances, we may be subject to significant regulatory fines or penalties.

 

11


Table of Contents

Any products manufactured or distributed by us pursuant to FDA clearances or approvals are subject to pervasive and continuing regulation by the FDA, including record keeping requirements and reporting of adverse experiences with the use of the device. Device manufacturers are required to register their establishments and list their devices with the FDA and certain state agencies, and are subject to periodic inspections by the FDA and certain state agencies. The FDA Act requires devices to be manufactured to comply with applicable QSR regulations which impose certain procedural and documentation requirements upon us with respect to design, development, manufacturing and quality assurance activities. We are subject to unannounced inspections by the FDA and the Food and Drug Branch of the California Department of Health Services, or CDHS, to determine our compliance with the QSR and other regulations, and these inspections may include the manufacturing facilities of our subcontractors.

Labeling and promotion activities are subject to scrutiny by the FDA and in certain instances, by the Federal Trade Commission. The FDA actively enforces regulations prohibiting marketing of products for unapproved uses. We and our products are also subject to a variety of state laws and regulations in those states or localities where our products are or will be marketed. Any applicable state or local regulations may hinder our ability to market our products in those states or localities. Manufacturers are also subject to numerous federal, state and local laws relating to such matters as safe working conditions, manufacturing practices, environmental protection, fire hazard control and disposal of hazardous or potentially hazardous substances. We may be required to incur significant costs to comply with such laws and regulations now or in the future. Such laws or regulations may have a material adverse effect upon our ability to do business.

Exports of our products are regulated by the FDA and are covered by the Export Amendment of 1996, which greatly expanded the export of approved and unapproved United States medical devices. However, some foreign countries require manufacturers to provide an FDA certificate for products for export (CPE) which requires the device manufacturer to certify to the FDA that the product has been granted pre-market clearance in the United States and that the manufacturing facilities appeared to be in compliance with QSR at the time of the last QSR inspection. The FDA will refuse to issue a CPE if significant outstanding QSR violations exist.

We are also regulated under the Radiation Control for Health and Safety Act, which requires laser products to comply with performance standards, including design and operation requirements, and manufacturers to certify in product labeling and in reports to the FDA that their products comply with all such standards. The law also requires laser manufacturers to file new product and annual reports, maintain manufacturing, testing and sales records and report product defects. Various warning labels must be affixed and certain protective devices installed, depending on the class of the product.

The introduction of our products in foreign markets will also subject us to foreign regulatory clearances which may impose substantial additional costs and burdens. International sales of medical devices are subject to the regulatory requirements of each country. The regulatory review process varies from country to country. Many countries also impose product standards, packaging requirements, labeling requirements and import restrictions on devices. In addition, each country has its own tariff regulations, duties and tax requirements. The approval by the FDA and foreign government authorities is unpredictable and uncertain. The necessary approvals or clearances may not be granted on a timely basis, if at all. Delays in receipt of, or a failure to receive, such approvals or clearances, or the loss of any previously received approvals or clearances, could have a material adverse effect on our business, financial condition and results of operations.

Changes in existing requirements or adoption of new requirements or policies by the FDA or other foreign and domestic regulatory authorities could adversely affect our ability to comply with regulatory requirements. Failure to comply with regulatory requirements could have a material adverse effect on our business, financial condition and results of operations. We may be required to incur significant costs to comply with laws and regulations in the future. These laws or regulations may have a material adverse effect upon our business, financial condition or results of operations.

Reimbursement

The cost of a significant portion of medical care in the United States is funded by government programs, health maintenance organizations and private insurance plans. Our ophthalmology products are typically purchased by doctors, clinics, hospitals and other users, which bill various third-party payers, such as government programs and private insurance plans, for the health care services provided to their patients. Government imposed limits on reimbursement of hospitals and other health care providers have significantly affected the spending budgets of doctors, clinics and hospitals to acquire new equipment, including our products. Under certain government insurance programs, a health care provider is reimbursed for a fixed sum for services rendered in treating a patient, regardless of the actual charge for such treatment. The Center for Medicare and Medicaid Services (CMS) reimburses hospitals on a prospectively-determined fixed amount for the costs associated with an in-patient hospitalization based on the patient’s discharge diagnosis, regardless of the actual costs incurred by the hospital or physician in furnishing the care and regardless of the specific devices used in that procedure. Reimbursement issues have affected sales of our ophthalmic products to a greater extent than sales of our aesthetics products because aesthetics procedures, in general, are not covered under most insurance programs and the cost of these procedures are paid for out-of-pocket by the patient.

 

12


Table of Contents

Private third-party reimbursement plans are also developing increasingly sophisticated methods of controlling health-care costs by imposing limitations on reimbursable procedures and the exploration of more cost-effective methods of delivering health care. In general, these government and private measures have caused health care providers, including our customers, to be more selective in the purchase of medical products. In addition, changes in government regulation or in private third-party payers’ policies may limit or eliminate reimbursement for procedures employing our products, which could have a material adverse effect on our business, results of operations and financial condition. See Item 1A Risk Factors - Factors That May Affect Future Results - “Our Operating Results May be Adversely Affected by Changes in Third Party Coverage and Reimbursement Policies and any Uncertainty Regarding Healthcare Reform Measures.”

Doctors, clinics, hospitals and other users of our products may not obtain adequate reimbursement for use of our products from third-party payers. While we believe that the laser procedures using our products have generally been reimbursed, payers may deny coverage and reimbursement for our products if they determine that the device was not reasonable and necessary for the purpose used, was investigational or was not cost-effective.

Backlog

We generally do not maintain a high level of backlog. As a result, we do not believe that our backlog at any particular time is indicative of future sales levels.

Employees

At January 1, 2011 we had a total of 145 full-time employees (140 in the U.S. and 5 in France), including 78 in operations and service, 37 in sales and marketing, 17 in research and development and 13 in finance and administration. We also employ, from time to time, a number of temporary and part-time employees as well as consultants on a contract basis. At January 1, 2011, we employed 22 such persons. Our future success will depend in part on our ability to attract, train, retain and motivate highly qualified employees, who are in great demand. We may not be successful in attracting and retaining such personnel. Our employees are not represented by a collective bargaining organization, and we have never experienced a work stoppage or strike. We consider our employee relations to be good.

Available Information

Our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to reports pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, are available, free of charge, on our website at www.IRIDEX.com, as soon as reasonably practicable after such reports are electronically filed with the Securities and Exchange Commission, however, the information on, or that can be accessed through, our website is not part of this report. Additionally, these filings may also be accessed through the SEC’s website at www.sec.gov. Further, a copy of this Annual Report on Form 10-K is located at the SEC’s Public Reference Room at 100 F Street, NE, Washington, D.C. 20549. Information on the operation of the Public Reference Room can be obtained by calling the SEC at 1-800-SEC-0330.

 

13


Table of Contents
Item 1A. Risk Factors

Factors That May Affect Future Results

In addition to the other information contained in this Annual Report Form 10-K, we have identified the following risks and uncertainties that may have a material adverse effect on our business, common stock price, financial condition or results of operation. You should carefully consider the risks described below before making an investment decision.

We Rely on Continued Market Acceptance of Our Existing Products and Any Decline in Sales of Our Existing Products Would Adversely Affect Our Business and Results of Operations.

We currently market visible and infrared medical laser systems and delivery devices to the ophthalmology and aesthetics markets. We believe that continued and increased sales, if any, of these medical laser systems is dependent upon a number of factors including the following:

 

   

acceptance of product performance, features, ease of use, scalability and durability;

 

   

recommendations and opinions by ophthalmologists, dermatologists, plastic surgeons, other clinicians, and their associated opinion leaders;

 

   

clinical study outcomes;

 

   

price of our products and prices of competing products and technologies particularly in light of the current macro-economic environment, in which the availability of credit is limited and purchasers may delay capital investments or place additional emphasis on price when making their purchase decision;

 

   

availability of competing products, technologies and alternative treatments; and

 

   

level of reimbursement for treatments administered with our products.

In addition, we derive a meaningful portion of our sales from recurring revenues consumable instrumentation including consumable EndoProbe devices and service. Our ability to increase recurring revenues from the sale of consumable products will depend primarily upon the features of our current products and product innovation, the quality of our products, ease of use and prices of our products, including the relationship to prices of competing products. The level of our service revenues will depend on the quality of service we provide and the responsiveness and the willingness of our customers to request our services rather than purchase competing products or services. Any significant decline in market acceptance of our products or our revenues derived from the sales of laser consoles, delivery devices, consumables or services may have a material adverse effect on our business, results of operations and financial condition.

If There is Not Sufficient Demand for the Aesthetics Procedures Performed with Our Products, Practitioner Demand for Our Products Could be Inhibited, Resulting in Unfavorable Operating Results and Reduced Growth Potential.

The global aesthetics market has seen a continued contraction and we have seen reduced demand for our products because most procedures performed using our aesthetics products are elective procedures not reimbursable through government or private health insurance, with the costs borne by the patient. The decision to purchase our aesthetics products may therefore be influenced by a number of factors, including:

 

   

consumer confidence, which may be impacted by economic and political conditions;

 

   

the success of our sales and marketing efforts;

 

   

evolving customer needs;

 

   

the introduction of new products and technologies;

 

   

evolving surgical practices;

 

   

evolving industry standards;

 

   

the cost of procedures performed using our products; and

 

   

the cost, safety and effectiveness of alternative treatments, including treatments which are not based upon laser or other light-based technologies and treatments which use pharmaceutical products.

If, as a result of these factors, there is not sufficient demand for the procedures performed with our aesthetics products, practitioner demand for our aesthetics products could be reduced, resulting in unfavorable operating results and lower growth potential.

 

14


Table of Contents

We Face Strong Competition in Our Markets and Expect the Level of Competition to Grow in the Foreseeable Future.

Competition in the market for devices used for ophthalmic and aesthetics treatment procedures is intense and is expected to increase. Our competitive position depends on a number of factors including product performance, characteristics and functionality, ease of use, scalability, durability and cost. Our principal competitors in ophthalmology are Alcon Inc., Carl Zeiss Meditec AG, Nidek Co. Ltd., Synergetics, Topcon Corporation, Ellex Medical Lasers, Ltd. and Lumenis Ltd. Most of these companies currently offer a competitive, semiconductor-based laser system for ophthalmology. Also within ophthalmology, pharmaceutical alternative treatments for AMD and DME such as Lucentis/Avastin (Genentech), and to a lesser extent Visudyne (Novartis) and Macugen (OSI Pharmaceuticals), compete rigorously with traditional laser procedures.

In aesthetics, our principal competitors are Cutera, Syneron, Palomar Technologies, Inc., Sciton, Lumenis Ltd. and Cynosure. These competitors have more sales representatives supporting broader product lines. Some competitors have substantially greater financial, engineering, product development, manufacturing, marketing and technical resources than we do.

In both markets, some companies also have greater name recognition than we do and benefit from long-standing customer relationships. In addition to other companies that manufacture photocoagulators, we compete with pharmaceuticals, other technologies and other surgical techniques. Some medical companies, academic and research institutions, or others, may develop new technologies or therapies that are more effective in treating conditions targeted by us or are less expensive than our current or future products. Any such developments could have a material adverse effect on our business, financial condition and results of operations.

Our Operating Results May be Adversely Affected by Uncertainty Regarding Healthcare Reform Measures and Changes in Third Party Coverage and Reimbursement Policies.

Changes in government legislation or regulation or in private third-party payers’ policies toward reimbursement for procedures employing our products may prohibit adequate reimbursement. There have been a number of legislative and regulatory proposals to change the healthcare system, reduce the costs of healthcare and change medical reimbursement policies. Doctors, clinics, hospitals and other users of our products may decline to purchase our products to the extent there is uncertainty regarding reimbursement of medical procedures using our products and any healthcare reform measures. Further proposed legislation, regulation and policy changes affecting third party reimbursement are likely. We are unable to predict what legislation or regulation, if any, relating to the health care industry or third-party coverage and reimbursement may be enacted in the future, or what effect such legislation or regulation may have on us. However, denial of coverage and reimbursement of our products would have a material adverse effect on our business, results of operations and financial condition.

Our ophthalmology products are typically purchased by doctors, clinics, hospitals and other users, which bill various third-party payers, such as governmental programs and private insurance plans, for the health care services provided to their patients. Third-party payers are increasingly scrutinizing and challenging the coverage of new products and the level of reimbursement for covered products. Doctors, clinics, hospitals and other users of our products may not obtain adequate reimbursement for use of our products from third-party payers. While we believe that the laser procedures using our products have generally been reimbursed, payers may deny coverage and reimbursement for our products if they determine that the device was not reasonable and necessary for the purpose used, was investigational or was not cost-effective.

We Are Exposed to Risks Associated With Worldwide Economic Slowdowns and Related Uncertainties.

We are subject to macro-economic fluctuations in the U.S. and worldwide economy. Concerns about consumer and investor confidence, volatile corporate profits and reduced capital spending, international conflicts, terrorist and military activity, civil unrest and pandemic illness could reduce customer orders or cause customer order cancellations. In addition, political and social turmoil related to international conflicts and terrorist acts may put further pressure on economic conditions in the United States and abroad.

Weak economic conditions and declines in consumer spending and consumption may harm our operating results. Purchases of our products are often discretionary. During uncertain economic times, customers or potential customers may delay, reduce or forego their purchases of our products and services, which may impact our business in a number of ways, including lower prices for our products and services and reducing or delaying sales. There could be a number of follow-on effects from economic uncertainty on our business, including insolvency of key suppliers resulting in product delays, delays in customer payments of outstanding accounts receivable and/or customer insolvencies, counterparty failures negatively impacting our operations, and increasing expense or inability to obtain future financing.

If economic uncertainty persisted, or if the economy entered a prolonged period of decelerating growth, our results of operations may be harmed.

 

15


Table of Contents

We Depend on International Sales for a Significant Portion of Our Operating Results.

We derive, and expect to continue to derive, a large portion of our revenues from international sales. For the fiscal year ended January 1, 2011, our international sales were $19.6 million or 44.8% of total sales. We anticipate that international sales will continue to account for a significant portion of our revenues in the foreseeable future. None of our international revenues and costs has been denominated in foreign currencies, other than sales made by our French subsidiary. As a result, an increase in the value of the U.S. dollar relative to foreign currencies makes our products more expensive and thus less competitive in foreign markets. The factors stated above could have a material adverse effect on our business, financial condition or results of operations. Our international operations and sales are subject to a number of other risks and potential costs, including:

 

   

impact of international conflicts, terrorist and military activity, civil unrest;

 

   

impact of recessions in global economies and availability of credit;

 

   

fluctuations in foreign currency exchange rates;

 

   

performance of our international channel of distributors;

 

   

longer accounts receivable collection periods;

 

   

differing local product preferences and product requirements;

 

   

cultural differences;

 

   

changes in foreign medical reimbursement and coverage policies and programs;

 

   

political and economic instability;

 

   

difficulty in staffing and managing foreign operations;

 

   

foreign certification requirements, including continued ability to use the “CE” mark in Europe, and other local regulatory requirements;

 

   

reduced or limited protections of intellectual property rights in jurisdictions outside the United States;

 

   

potentially adverse tax consequences; and

 

   

multiple protectionist, adverse and changing foreign governmental laws and regulations.

Any one or more of these factors stated above could have a material adverse effect on our business, financial condition or results of operations.

As we expand our existing international operations we may encounter new risks. For example, as we focus on building our international sales and distribution networks in new geographic regions, we must continue to develop relationships with qualified local distributors and trading companies. If we are not successful in developing these relationships, we may not be able to grow sales in these geographic regions. These or other similar risks could adversely affect our revenues and profitability.

If We Cannot Increase Our Sales Volumes, Reduce Our Costs or Introduce Higher Margin Products to Offset Anticipated Reductions in the Average Unit Price of Our Products, Our Operating Results May Suffer.

The average unit price of our products may decrease in the future in response to changes in product mix, competitive pricing pressures, new product introductions by our competitors or other factors. If we are unable to offset the anticipated decrease in our average selling prices by increasing our sales volumes or through new product introductions, our net revenues will decline. In addition, to maintain our gross margins we must continue to reduce the manufacturing cost of our products. If we cannot maintain our gross margins our business could be seriously harmed, particularly if the average selling price of our products decreases significantly without a corresponding increase in sales.

 

16


Table of Contents

Efforts to Acquire Additional Companies or Product Lines May Divert Our Managerial Resources Away from Our Business Operations, and If We Complete Additional Acquisitions, We May Incur or Assume Additional Liabilities or Experience Integration Problems.

Since 1989, we have completed 5 acquisitions. As part of our growth strategy we are seeking to acquire additional businesses or product lines for various reasons, including adding new products, adding new customers, increasing penetration with existing customers, adding new manufacturing capabilities or expanding into new geographic markets. Our ability to successfully grow through additional acquisitions depends upon our ability to identify, negotiate, complete and integrate suitable acquisitions and to obtain any necessary financings. These additional efforts could divert the attention of our management and key personnel from our business operations. If we complete additional acquisitions, we may also experience:

 

   

difficulties integrating any acquired products into our existing business;

 

   

delays in realizing the benefits of the acquired products;

 

   

diversion of our management’s time and attention from other business concerns;

 

   

adverse customer reaction to the product acquisition; and

 

   

increases in expenses.

Any one or more of these factors stated above could have a material adverse effect on our business, financial condition or results of operations.

Furthermore, additional acquisitions could materially impair our operating results by causing us to amortize acquired assets, incur acquisition expenses and add debt.

Inability of Customers Obtaining Credit or Material Increases in Interest Rates May Harm Our Sales.

Some of our products are sold to health care providers in general practice. Many of these health care providers purchase our products with funds they secure through various financing arrangements with third party financial institutions, including credit facilities and short-term loans. If availability of credit becomes more limited, or interest rates increase, these financing arrangements will be harder to obtain or more expensive to our customers, which may decrease demand for our products. Any reduction in the sales of our products would cause our business to suffer.

Our Future Levels of Indebtness May Limit Our Ability to Operate Our Business, Finance Acquisitions and Pursue Business Strategies.

As of January 1, 2011, our cash balance was $9.0 million and we had no debt outstanding. If we are unable to maintain positive cash flows we may need to incur debt to sustain our operations. In addition it is our goal to seek growth through investments in internal programs and acquisitions both of which may result in us incurring debt. Increased levels of debt and obligations may, among other things:

 

   

make it more difficult for us to meet our payments and other obligations to other third parties;

 

   

increase our vulnerability to, and limit our flexibility in planning for, adverse economic and industry conditions;

 

17


Table of Contents
   

increase our sensitivity to interest rate increases on our indebtedness with variable interest rates;

 

   

result in an event of default if we fail to comply with the financial and other restrictive covenants contained in our debt agreements, which event of default could result in all of our debt becoming immediately due and payable;

 

   

affect our credit rating;

 

   

limit our ability to obtain additional financing to fund future working capital, capital expenditures, additional acquisitions and other general corporate requirements;

 

   

create competitive disadvantages compared to other companies with less indebtedness; and

 

   

limit our ability to apply proceeds from an offering or asset sale to purposes other than the repayment of debt.

Our ability to service any future indebtedness will depend on our future performance, which will be affected by prevailing economic conditions and financial, business, regulatory and other factors. Some of these factors are beyond our control. In addition credit markets remain fragile. We cannot assure you that financing or refinancing will be available on a timely basis or on satisfactory terms, if at all.

Our Future Success Depends on Our Ability to Develop and Successfully Introduce New Products and New Applications.

Our future success is dependent upon, among other factors, our ability to develop, obtain regulatory approval or clearance of, manufacture and market new products. Successful commercialization of new products and new applications will require that we effectively transfer production processes from research and development to manufacturing and effectively coordinate with our suppliers. In addition, we must successfully sell and achieve market acceptance of new products and applications and enhanced versions of existing products. The extent of, and rate at which, market acceptance and penetration are achieved by future products is a function of many variables, which include, among other things, price, safety, efficacy, reliability, marketing and sales efforts, the development of new applications for these products, the availability of third-party reimbursement of procedures using our new products, the existence of competing products and general economic conditions affecting purchasing patterns. Our ability to market and sell new products may also be subject to government regulation, including approval or clearance by the United States Food and Drug Administration, or FDA, and foreign government agencies. Any failure in our ability to successfully develop and introduce new products or enhanced versions of existing products and achieve market acceptance of new products and new applications could have a material adverse effect on our operating results and would cause our net revenues to decline.

If We Fail to Manage Growth Effectively, Our Business Could Be Disrupted Which Could Harm Our Operating Results.

We have experienced and may in the future experience growth in our business, both organically and through the acquisition of businesses and products. We have made and expect to continue to make significant investments to enable our future growth through, among other things, new product innovation and clinical trials for new applications and products. We must also be prepared to expand our work force and to train, motivate and manage additional employees as the need for additional personnel arises. Our personnel, systems, procedures and controls may not be adequate to support our future operations. Any failure to effectively manage future growth could have a material adverse effect on our business, results of operations and financial condition.

While We Devote Significant Resources to Research and Development, Our Research and Development May Not Lead to New Products that Achieve Commercial Success.

The Company’s ability to generate incremental revenue growth will depend, in part, on the successful outcome of research and development activities, including clinical trials that lead to the development of new products and new applications using our products. Our research and development process is expensive, prolonged, and entails considerable uncertainty. Because of the complexities and uncertainties associated with ophthalmic and aesthetics research and development, products we are currently developing may not complete the development process or obtain the regulatory approvals required to market such products successfully. The products currently in our development pipeline may not be approved by regulatory entities and may not be commercially successful, and our current and planned products could be surpassed by more effective or advanced products of current or future competitors. Therefore, even if we are able to successfully develop enhancements or new generations of our products, these enhancements or new generations of products may not produce revenue in excess of the costs of development and they may be quickly rendered obsolete by changing customer preferences or the introduction by our competitors of products embodying new technologies or features.

 

18


Table of Contents

The Clinical Trial Process Required to Obtain Regulatory Approvals is Costly and Uncertain, and Could Result in Delays in New Product Introductions or Even an Inability to Release a Product.

The clinical trials required to obtain regulatory approvals for our products are complex and expensive and their outcomes are uncertain. We incur substantial expense for, and devote significant time to, clinical trials but cannot be certain that the trials will ever result in the commercial sale of a product. We may suffer significant setbacks in clinical trials, even after earlier clinical trials showed promising results. Any of our products may produce undesirable side effects that could cause us or regulatory authorities to interrupt, delay or halt clinical trials of a product candidate. We, the FDA, or another regulatory authority may suspend or terminate clinical trials at any time if they or we believe the trial participants face unacceptable health risks.

We Rely on Patents and Proprietary Rights to Protect our Intellectual Property and Business.

Our success and ability to compete is dependent in part upon our proprietary information. We rely on a combination of patents, trade secrets, copyright and trademark laws, nondisclosure and other contractual agreements and technical measures to protect our intellectual property rights. We file patent applications to protect technology, inventions and improvements that are significant to the development of our business. We have been issued twenty six United States patents and twelve foreign patents on the technologies related to our products and processes. We have approximately six pending patent applications in the United States and seven foreign pending patent applications that have been filed. Our patent applications may not be approved. Along with the acquisition of the AMS/Laserscope aesthetic products, we acquired a royalty-free license to eleven of the AMS/Laserscope patents. In addition, we acquired a license to a Palomar patent under which royalties are paid to Palomar based upon a percentage of sales of certain products acquired from AMS/Laserscope. The acquisition of the RetinaLabs assets included five additional patents. Any patents granted now or in the future may offer only limited protection against potential infringement and development by our competitors of competing products. Moreover, our competitors, many of which have substantial resources and have made substantial investments in competing technologies, may seek to apply for and obtain patents that will prevent, limit or interfere with our ability to make, use or sell our products either in the United States or in international markets.

Patents have a limited lifetime and once a patent expires competition may increase. For example our “Connector Patent” used to connect our delivery devices (consumable & durable) to our laser consoles expired in 2010. Delivery devices which do not utilize our Connector Patent technology are not recognized by our laser consoles. We derive, and expect to continue to derive, a large portion of our recurring revenue and profits from sales of our consumable EndoProbe devices. Expiration of this patent may increase competition from our competitors for our consumable EndoProbe device business and there can be no guarantees that we will maintain our market share of this business.

In addition to patents, we rely on trade secrets and proprietary know-how which we seek to protect, in part, through proprietary information agreements with employees, consultants and other parties. Our proprietary information agreements with our employees and consultants contain industry standard provisions requiring such individuals to assign to us without additional consideration any inventions conceived or reduced to practice by them while employed or retained by us, subject to customary exceptions. Proprietary information agreements with employees, consultants and others may be breached, and we may not have adequate remedies for any breach. Also, our trade secrets may become known to or independently developed by competitors.

The laser and medical device industry is characterized by frequent litigation regarding patent and other intellectual property rights. Companies in the medical device industry have employed intellectual property litigation to gain a competitive advantage. Numerous patents are held by others, including academic institutions and our competitors. Until recently patent applications were maintained in secrecy in the United States until the patents were issued. Patent applications filed in the United States after November 2000 generally will be published eighteen months after the filing date. However, since patent applications continue to be maintained in secrecy for at least some period of time, both within the United States and with regards to international patent applications, we cannot assure you that our technology does not infringe any patents or patent applications held by third parties. We have, from time to time, been notified of, or have otherwise been made aware of, claims that we may be infringing upon patents or other proprietary intellectual property owned by others. If it appears necessary or desirable, we may seek licenses under such patents or proprietary intellectual property. Although patent holders commonly offer such licenses, licenses under such patents or intellectual property may not be offered or the terms of any offered licenses may not be reasonable.

Any claims, with or without merit, and regardless of whether we are successful on the merits, would be time-consuming, result in costly litigation and diversion of technical and management personnel, cause shipment delays or require us to develop non-infringing technology or to enter into royalty or licensing agreements. For example, during fiscal year 2007, the Company settled patent litigations with Synergetics, Inc., which was time-consuming, costly and a diversion of technical and management personnel. An adverse determination in a judicial or administrative proceeding and failure to obtain necessary licenses or develop alternate technologies could prevent us from manufacturing and selling our products, which would have a material adverse effect on our business, results of operations and financial condition.

 

19


Table of Contents

We Rely on Our Direct Sales Force and Network of International Distributors to Sell Our Products and Any Failure to Maintain Our Direct Sales Force and Distributor Relationships Could Harm Our Business.

Our ability to sell our products and generate revenues depends upon our direct sales force within the United States and relationships with independent distributors outside the United States. Currently our direct sales force consists of 11 employees focused on Ophthalmology and 3 employees and 1 independent representative focused on aesthetics and we maintain relationships with approximately 100 independent distributors internationally selling our products into 107 countries. We generally grant our distributors exclusive territories for the sale of our products in specified countries. The amount and timing of resources dedicated by our distributors to the sales of our products is not within our control. Our international sales are entirely dependent on the efforts of these third parties. If any distributor breaches terms of its distribution agreement or fails to generate sales of our products, we may be forced to replace the distributor and our ability to sell our products into that exclusive sales territory would be adversely affected.

We do not have any long-term employment contracts with the members of our direct sales force. We may be unable to replace our direct sales force personnel with individuals of equivalent technical expertise and qualifications, which may limit our revenues and our ability to maintain market share. The loss of the services of these key personnel would harm our business. Similarly, our distributor agreements are generally terminable at will by either party and distributors may terminate their relationships with us, which would affect our international sales and results of operations.

If We Lose Key Personnel or Fail to Integrate Replacement Personnel Successfully, Our Ability to Manage Our Business Could Be Impaired.

Our future success depends upon the continued service of our key management, technical, sales, and other critical personnel. Our officers and other key personnel are employees-at-will, and we cannot assure you that we will be able to retain them. Key personnel have left our Company in the past, and there likely will be additional departures of key personnel from time to time in the future. The loss of any key employee could result in significant disruptions to our operations, including adversely affecting the timeliness of product releases, the successful implementation and completion of Company initiatives, and the results of our operations. Competition for these individuals is intense, and we may not be able to attract, assimilate or retain highly qualified personnel. Competition for qualified personnel in our industry and the San Francisco Bay Area, as well as other geographic markets in which we recruit, is intense and characterized by increasing salaries, which may increase our operating expenses or hinder our ability to recruit qualified candidates. In addition, the integration of replacement personnel could be time consuming, may cause additional disruptions to our operations, and may be unsuccessful.

If We Fail to Accurately Forecast Demand For Our Product and Component Requirements For the Manufacture of Our Product, We Could Incur Additional Costs or Experience Manufacturing Delays and May Experience Lost Sales or Significant Inventory Carrying Costs.

We use quarterly and annual forecasts based primarily on our anticipated product orders to plan our manufacturing efforts and determine our requirements for components and materials. It is very important that we accurately predict both the demand for our product and the lead times required to obtain the necessary components and materials. Lead times for components vary significantly and depend on numerous factors, including the specific supplier, the size of the order, contract terms and current market demand for such components. If we overestimate the demand for our product, we may have excess inventory, which would increase our costs. If we underestimate demand for our product and consequently, our component and materials requirements, we may have inadequate inventory, which could interrupt our manufacturing, delay delivery of our product to our customers and result in the loss of customer sales. Any of these occurrences would negatively impact our business and operating results.

 

20


Table of Contents

We Depend on Sole Source or Limited Source Suppliers.

We rely on third parties to manufacture substantially all of the components used in our products, including optics, laser diodes and crystals. We have some long term or volume purchase agreements with our suppliers and currently purchase components on a purchase order basis. Some of our suppliers and manufacturers are sole or limited sources. In addition, some of these suppliers are relatively small private companies that may discontinue their operations at any time. There are risks associated with the use of independent manufacturers, including the following:

 

   

unavailability of, shortages or limitations on the ability to obtain supplies of components in the quantities that we require;

 

   

delays in delivery or failure of suppliers to deliver critical components on the dates we require;

 

   

failure of suppliers to manufacture components to our specifications, and potentially reduced quality; and

 

   

inability to obtain components at acceptable prices.

Our business and operating results may suffer from the lack of alternative sources of supply for critical sole and limited source components. The process of qualifying suppliers is complex, requires extensive testing with our products, and may be lengthy, particularly as new products are introduced. New suppliers would have to be educated in our production processes. In addition, the use of alternate components may require design alterations to our products and additional product testing under FDA and relevant foreign regulatory agency guidelines, which may delay sales and increase product costs. Any failures by our vendors to adequately supply limited and sole source components may impair our ability to offer our existing products, delay the submission of new products for regulatory approval and market introduction, materially harm our business and financial condition and cause our stock price to decline. Establishing our own capabilities to manufacture these components would be expensive and could significantly decrease our profit margins. Our business, results of operations and financial condition would be adversely affected if we are unable to continue to obtain components in the quantity and quality desired and at the prices we have budgeted.

We Face Risks Associated with Our Collaborative and OEM Relationships.

Our collaborators may not pursue further development and commercialization of products resulting from collaborations with us or may not devote sufficient resources to the marketing and sale of such products. We cannot provide assurance that these types of relationships will continue over a longer period. Our reliance on others for clinical development, manufacturing and distribution of our products may result in unforeseen problems. Further, our collaborative partners may develop or pursue alternative technologies either on their own or in collaboration with others. If a collaborator elects to terminate its agreement with us, our ability to develop, introduce, market and sell the product may be significantly impaired and we may be forced to discontinue altogether the product resulting from the collaboration. We may not be able to negotiate alternative collaboration agreements on acceptable terms, if at all. The failure of any current or future collaboration efforts could have a material adverse effect on our ability to introduce new products or applications and therefore could have a material adverse effect on our business, results of operations and financial condition.

We Depend on Collaborative Relationships to Develop, Introduce and Market New Products, Product Enhancements and New Applications.

We depend on both clinical and commercial collaborative relationships. We have entered into collaborative relationships with academic medical centers and physicians in connection with the research and innovation and clinical testing of our products. Commercially, we currently collaborate with Bausch & Lomb to design and manufacture a solid-state green wavelength (532nm) laser photocoagulator module for Bausch & Lomb, called the Millennium Endolase module. The Millennium Endolase module is designed to be a component of Bausch & Lomb’s ophthalmic surgical suite product offering and is not expected to be sold as a stand-alone product. Sales of the Millennium Endolase module are dependent upon the actual order rate from and shipment rate to Bausch & Lomb, which depends on the efforts of our partner and is beyond our control. Bausch & Lomb has introduced a new product to replace the product that included the Millennium Endolase module and as such we have seen sales to Bausch & Lomb decline and we anticipate sales to continue to decline. The failure to obtain any additional future clinical or commercial collaborations and the resulting failure or success of such arrangements of any current or future clinical or commercial collaboration relationships could have a material adverse effect on our ability to introduce new products or applications and therefore could have a material adverse effect on our business, results of operations and financial condition.

If We Fail to Maintain Our Relationships With Health Care Providers, Customers May Not Buy Our Products and Our Revenue and Profitability May Decline.

We market our products to numerous health care providers, including physicians, hospitals, ambulatory surgical centers, government affiliated groups and group purchasing organizations. We have developed and strive to maintain close relationships with members of each of these groups who assist in product research and development and advise us on how to satisfy the full range of surgeon and patient needs. We rely on these groups to recommend our products to their patients and to other members of their organizations. The failure of our existing products and any new products we may introduce to retain the support of these various groups could have a material adverse effect on our business, financial condition and results of operations.

 

21


Table of Contents

We Face Manufacturing Risks.

The manufacture of our infrared and visible laser consoles and the related delivery devices is a highly complex and precise process. We assemble critical subassemblies and substantially all of our final products at our facility in Mountain View, California. We may experience manufacturing difficulties, quality control issues or assembly constraints, particularly with regard to new products that we may introduce. If our sales increase substantially, including increases in the sales of our aesthetics products, we may need to increase our production capacity and may not be able to do so in a timely, effective, or cost efficient manner. We may not be able to manufacture sufficient quantities of our products, which may require that we qualify other manufacturers for our products. Furthermore, we may experience delays, disruptions, capacity constraints or quality control problems in our manufacturing operations and as a result, product shipments to our customers could be delayed, which would negatively impact our net revenues.

If Our Facilities Were To Experience Catastrophic Loss, Our Operations Would Be Seriously Harmed.

Our facilities could be subject to catastrophic loss such as fire, flood or earthquake. All of our research and development activities, manufacturing, our corporate headquarters and other critical business operations are located near major earthquake faults in Mountain View, California. Any such loss at any of our facilities could disrupt our operations, delay production, shipments and revenue and result in large expense to repair and replace our facilities.

Our Operating Results May Fluctuate from Quarter to Quarter and Year to Year.

Our sales and operating results may vary significantly from quarter to quarter and from year to year in the future. Our operating results are affected by a number of factors, many of which are beyond our control. Factors contributing to these fluctuations include the following:

 

   

general economic uncertainties and political concerns;

 

   

the timing of the introduction and market acceptance of new products, product enhancements and new applications;

 

   

changes in demand for our existing line of ophthalmology and aesthetics products;

 

   

the cost and availability of components and subassemblies, including the willingness and ability of our sole or limited source suppliers to timely deliver components at the times and prices that we have planned;

 

   

our ability to maintain sales volumes at a level sufficient to cover fixed manufacturing and operating costs;

 

   

fluctuations in our product mix between ophthalmology and aesthetics products and foreign and domestic sales;

 

   

our ability to address our liquidity issues should the need occur;

 

   

the effect of regulatory approvals and changes in domestic and foreign regulatory requirements;

 

   

introduction of new products, product enhancements and new applications by our competitors, entry of new competitors into our markets, pricing pressures and other competitive factors;

 

   

our long and highly variable sales cycle;

 

   

changes in the prices at which we can sell our products;

 

   

changes in customers’ or potential customers’ budgets as a result of, among other things, reimbursement policies of government programs and private insurers for treatments that use our products; and

 

22


Table of Contents
   

increased product innovation costs.

In addition to these factors, our quarterly results have been, and are expected to continue to be, affected by seasonal factors. For example, our European sales during the third quarter are generally lower due to many businesses being closed for the summer vacation season.

Our expense levels are based, in part, on expected future sales. If sales levels in a particular quarter do not meet expectations, we may be unable to adjust operating expenses quickly enough to compensate for the shortfall of sales, and our results of operations may be adversely affected. We encountered this adverse effect on our operating results during our recent history starting with the quarter ended March 31, 2007 through the quarter ended January 3, 2009. In addition, we have historically made a significant portion of each quarter’s product shipments near the end of the quarter. If that pattern continues, any delays in shipment of products could have a material adverse effect on results of operations for such quarter. Due to these and other factors, we believe that quarter to quarter and year to year comparisons of our past operating results may not be meaningful. You should not rely on our results for any quarter or year as an indication of our future performance. Our operating results in future quarters and years may be below expectations, which would likely cause the price of our common stock to fall.

Our Stock Price Has Been and May Continue to be Volatile and an Investment in Our Common Stock Could Suffer a Decline in Value.

The trading price of our common stock has been subject to wide fluctuations in response to a variety of factors, some of which are beyond our control, including quarterly variations in our operating results, announcements by us or our competitors of new products or of significant clinical achievements, changes in market valuations of other similar companies in our industry and general market conditions. In addition, the trading price of our common stock has been significantly adversely affected by our recent operating performance and by liquidity issues. In the fiscal year ended January 1, 2011, the trading price of our common stock fluctuated from a low of $2.77 per share to a high of $4.50 per share. There can be no assurance that our common stock trading price will not suffer declines. Our common stock may experience an imbalance between supply and demand resulting from low trading volumes and therefore broad market fluctuations could have a significant impact on the market price of our common stock regardless of our performance.

We Are Subject To Government Regulations Which May Cause Us to Delay or Withdraw the Introduction of New Products or New Applications for Our Products.

The medical devices that we market and manufacture are subject to extensive regulation by the FDA and by foreign and state governments. Under the Federal Food, Drug and Cosmetic Act and the related regulations, the FDA regulates the design, development, clinical testing, manufacture, labeling, sale, distribution and promotion of medical devices. Before a new device can be introduced into the market, the product must undergo rigorous testing and an extensive regulatory review process implemented by the FDA under federal law. Unless otherwise exempt, a device manufacturer must obtain market clearance through either the 510(k) premarket notification process or the lengthier premarket approval application (PMA) process. Depending upon the type, complexity and novelty of the device and the nature of the disease or disorder to be treated, the FDA process can take several years, require extensive clinical testing and result in significant expenditures. Even if regulatory approval is obtained, later discovery of previously unknown safety issues may result in restrictions on the product, including withdrawal of the product from the market. Other countries also have extensive regulations regarding clinical trials and testing prior to new product introductions. Our failure to obtain government approvals or any delays in receipt of such approvals would have a material adverse effect on our business, results of operations and financial condition.

The FDA imposes additional regulations on manufacturers of approved medical devices. We are required to comply with the applicable Quality System regulations and our manufacturing facilities are subject to ongoing periodic inspections by the FDA and corresponding state agencies, including unannounced inspections, and must be licensed as part of the product approval process before being utilized for commercial manufacturing. Noncompliance with the applicable requirements can result in, among other things, fines, injunctions, civil penalties, recall or seizure of products, total or partial suspension of production, withdrawal of marketing approvals, and criminal prosecution. The FDA also has the authority to request repair, replacement or refund of the cost of any device we manufacture or distribute. Any of these actions by the FDA would materially and adversely affect our ability to continue operating our business and the results of our operations.

In addition, we are also subject to varying product standards, packaging requirements, labeling requirements, tariff regulations, duties and tax requirements. As a result of our sales in Europe, we are required to have all products “CE” marked, an international symbol affixed to all products demonstrating compliance with the European Medical Device Directive and all applicable standards. While currently all of our released products are CE marked, continued certification is based on the successful review of our quality system by our European Registrar during their annual audit. Any loss of certification would have a material adverse effect on our business, results of operations and financial condition.

 

23


Table of Contents

If We Fail to Comply With the FDA’s Quality System Regulation and Laser Performance Standards Our Manufacturing Operations Could Be Halted, and Our Business Would Suffer.

We are currently required to demonstrate and maintain compliance with the FDA’s Quality System Regulation, or QSR. The QSR is a complex regulatory scheme that covers the methods and documentation of the design, testing, control, manufacturing, labeling, quality assurance, packaging, storage and shipping of our products. Because our products involve the use of lasers, our products also are covered by a performance standard for lasers set forth in FDA regulations. The laser performance standard imposes specific record-keeping, reporting, product testing and product labeling requirements. These requirements include affixing warning labels to laser products, as well as incorporating certain safety features in the design of laser products. The FDA enforces the QSR and laser performance standards through periodic unannounced inspections. We have been, and anticipate in the future being, subject to such inspections. Our failure to take satisfactory corrective action in response to an adverse QSR inspection or our failure to comply with applicable laser performance standards could result in enforcement actions, including a public warning letter, a shutdown of our manufacturing operations, a recall of our products, civil or criminal penalties, or other sanctions, such as those described in the preceding risk factor above, which would cause our sales and business to suffer.

If We Modify One of Our FDA Approved Devices, We May Need to Seek Reapproval, Which, if Not Granted, Would Prevent Us from Selling Our Modified Products or Cause Us to Redesign Our Products.

Any modifications to an FDA-cleared device that would significantly affect its safety or effectiveness or that would constitute a major change in its intended use would require a new 510(k) clearance or possibly a premarket approval. We may not be able to obtain additional 510(k) clearances or premarket approvals for new products or for modifications to, or additional indications for, our existing products in a timely fashion, or at all. Delays in obtaining future clearances would adversely affect our ability to introduce new or enhanced products in a timely manner, which in turn would harm our revenues and future profitability. We have made modifications to our devices in the past and may make additional modifications in the future that we believe do not or will not require additional clearances or approvals. If the FDA disagrees, and requires new clearances or approvals for the modifications, we may be required to recall and to stop marketing the modified devices, which could harm our operating results and require us to redesign our products.

Because We Do Not Require Training for Users of Our Products, and Sell Our Products to Non-physicians, There Exists an Increased Potential for Misuse of Our Products, Which Could Harm Our Reputation and Our Business.

Federal regulations restrict the sale of our products to or on the order of “licensed practitioners.” The definition of “licensed practitioners” varies from state to state. As a result, our products may be purchased or operated by physicians with varying levels of training, and in many states by non-physicians, including nurse practitioners and technicians. Outside the United States, many jurisdictions do not require specific qualifications or training for purchasers or operators of our products. We do not supervise the procedures performed with our products, nor do we require that direct medical supervision occur. We, and our distributors, generally offer but do not require purchasers or operators of our products to attend training sessions. In addition, we sometimes sell our systems to companies that rent our systems to third parties and that provide a technician to perform the procedure. The lack of training and the purchase and use of our products by non-physicians may result in product misuse and adverse treatment outcomes, which could harm our reputation and expose us to costly product liability litigation.

Some of Our Laser Systems Are Complex in Design and May Contain Defects That Are Not Detected Until Deployed By Our Customers, Which Could Increase Our Costs and Reduce Our Revenues.

Laser systems are inherently complex in design and require ongoing regular maintenance. The manufacture of our lasers, laser products and systems involves a highly complex and precise process. As a result of the technical complexity of our products, changes in our or our suppliers’ manufacturing processes or the inadvertent use of defective materials by us or our suppliers could result in a material adverse effect on our ability to achieve acceptable manufacturing yields and product reliability. To the extent that we do not achieve such yields or product reliability, our business, operating results, financial condition and customer relationships would be adversely affected. We provide warranties on certain of our product sales, and allowances for estimated warranty costs are recorded during the period of sale. The determination of such allowances requires us to make estimates of failure rates and expected costs to repair or replace the products under warranty. We currently establish warranty reserves based on historical warranty costs. If actual return rates and/or repair and replacement costs differ significantly from our estimates, adjustments to recognize additional cost of revenues may be required in future periods.

 

24


Table of Contents

Our customers may discover defects in our products after the products have been fully deployed and operated under peak stress conditions. In addition, some of our products are combined with products from other vendors, which may contain defects. As a result, should problems occur, it may be difficult to identify the source of the problem. If we are unable to identify and fix defects or other problems, we could experience, among other things:

 

   

loss of customers;

 

   

increased costs of product returns and warranty expenses;

 

   

damage to our brand reputation;

 

   

failure to attract new customers or achieve market acceptance;

 

   

diversion of development and engineering resources; and

 

   

legal actions by our customers.

The occurrence of any one or more of the foregoing factors could seriously harm our business, financial condition and results of operations.

Our Products Could Be Subject to Recalls Even After Receiving FDA Approval or Clearance. A Recall Would Harm Our Reputation and Adversely Affect Our Operating Results.

The FDA and similar governmental authorities in other countries in which we market and sell our products have the authority to require the recall of our products in the event of material deficiencies or defects in design or manufacture. A government mandated recall, or a voluntary recall by us, could occur as a result of component failures, manufacturing errors or design defects, including defects in labeling. A recall could divert management’s attention, cause us to incur significant expenses, harm our reputation with customers and negatively affect our future sales.

If Product Liability Claims are Successfully Asserted Against Us, We may Incur Substantial Liabilities That May Adversely Affect Our Business or Results of Operations.

We may be subject to product liability claims from time to time. Our products are highly complex and some are used to treat extremely delicate eye tissue and skin conditions on and near a patient’s face. We believe we maintain adequate levels of product liability insurance but product liability insurance is expensive and we might not be able to obtain product liability insurance in the future on acceptable terms or in sufficient amounts to protect us, if at all. A successful claim brought against us in excess of our insurance coverage could have a material adverse effect on our business, results of operations and financial condition.

 

Item 1B. Unresolved Staff Comments

None.

 

Item 2. Properties

We lease 37,000 square feet of space in Mountain View, California. This facility is being substantially utilized for all of our manufacturing, research and development efforts and also serves as our corporate headquarters. This facility is utilized for both our ophthalmology medical device segment and our dermatology medical device segment. We also lease 1,722 square feet facility in Lisses, France that is used for sales, service and support. On December 14, 2009, we terminated our lease at Cwmbran, South Wales.

Management believes that these facilities are adequate for our current needs and that suitable additional space or an alternative space would be available as needed in the future on commercially reasonable terms.

 

Item 3. Legal Proceedings

None

 

25


Table of Contents
Item 4. (Removed and Reserved)

 

26


Table of Contents

PART II

 

Item 5. Market for Registrant’s Common Equity and Related Stockholder Matters, and Issuer Purchases of Equity Securities

Market Information for Common Equity

Our common stock is currently and has been quoted on the NASDAQ Global Market under the symbol “IRIX” and has been since our initial public offering on February 15, 1996. The following table sets forth for the periods indicated the high and low sales prices for our common stock, as reported on the NASDAQ Global Market.

 

     High      Low  

Fiscal 2010

     

Fourth Quarter

   $ 3.96       $ 3.30   

Third Quarter

   $ 4.01       $ 2.77   

Second Quarter

   $ 4.50       $ 3.65   

First Quarter

   $ 4.49       $ 2.90   
Fiscal 2009      

Fourth Quarter

   $ 3.40       $ 2.05   

Third Quarter

   $ 2.42       $ 1.86   

Second Quarter

   $ 2.55       $ 1.15   

First Quarter

   $ 1.34       $ 0.55   

On March 17, 2011 the closing price on the NASDAQ Global Market for our common stock was $3.95 per share. As of March 17, 2011, there were approximately 61 holders of record (not in street name) of our common stock. Because many of our shares of common stock are held by brokers and other institutions on behalf of our stockholders, we are unable to estimate the total number of stockholders represented by these record holders.

Dividend Policy

We have never paid cash dividends on our common stock. We currently intend to retain any earnings for use in our business and do not anticipate paying cash dividends in the foreseeable future. In addition, the payment of cash dividends to our stockholders is currently prohibited by our credit facility. See Note 10 - Bank Borrowings, in Notes to Consolidated Financial Statements.

Recent Sales of Unregistered Securities

On April 8, 2010, in connection with our acquisition of substantially all of the assets of RetinaLabs, Inc., we issued 115,000 shares of our common stock at a fair value of $493,000 in addition to $250,000 of cash consideration. Pursuant to the terms of the purchase agreement, we may be obligated to issue up to an additional 200,000 shares of our common stock. See Note 3 – Business Combination, in Notes to Consolidated Financial Statements, which describes further this business acquisition.

No underwriters were involved in the foregoing issuance of securities. The issuances of the securities described above were deemed to be exempt from registration under the Securities Act of 1933, as amended (the “Securities Act”) in reliance on Section 4(2) of the Securities Act. The recipients represented their intention to acquire the securities for investment only and not with a view to or for sale in connection with any distribution thereof and appropriate legends were affixed to the stock certificates issued. All recipients had adequate access to information about us.

 

Item 6. Selected Financial Data

Not applicable.

 

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

Overview

IRIDEX Corporation is a leading worldwide provider of therapeutic based laser systems, delivery devices and consumable instrumentation used to treat eye diseases in ophthalmology and skin conditions in dermatology (also referred to as aesthetics). Our products are sold in the United States (U.S.) predominantly through a direct sales force and internationally through approximately 100 independent distributors into 107 countries except for our aesthetics products which are sold, marketed and serviced directly in France.

 

27


Table of Contents

We manage and evaluate our business in two segments - ophthalmology and aesthetics. We further break down these segments by geography - Domestic (U.S.) and International (the rest of the world). In addition, within ophthalmology, we review trends by laser system sales (consoles and durable delivery devices) and recurring sales (single use consumable laser probes and other associated instrumentation (“consumables”), service and support).

Our ophthalmology revenues arise primarily from the sale of our IQ and OcuLight laser systems, consumables and service and support activities. Our current family of IQ products includes IQ 532, IQ 577 and IQ 810 laser photocoagulation systems and our OcuLight products include OcuLight TX, OcuLight Symphony (Laser Delivery System), OcuLight SL, OcuLight SLx, OcuLight GL and OcuLight GLx laser photocoagulation systems. We also produce the Millennium Endolase module which is sold exclusively to Bausch & Lomb and incorporated into their Millennium Microsurgical System.

Our aesthetics revenues arise primarily from the sales of our aesthetics systems and service contracts. Our current family of systems includes the VariLite, DioLite, Gemini, Venus-i, Lyra-i and Aura-i Laser Systems.

Sales to international distributors are made on open credit terms or letters of credit and are currently denominated in U.S. dollars and accordingly, are not subject to risks associated with currency fluctuations. Sales of aesthetics products to end customers from our French subsidiary are denominated in Euros.

Cost of revenues consists primarily of the cost of purchasing components and sub-systems, assembling, packaging, shipping and testing components at our facility, direct labor and associated overhead, service and U.S. field service costs and for 2008, amortization of intangible assets.

Research and development expenses consist primarily of personnel costs, materials to support new product development and research support provided to clinicians at medical institutions developing new applications which utilize our products and regulatory expenses. Research and development costs have been expensed as incurred.

Sales and marketing expenses consist primarily of costs of personnel, sales commissions, travel expenses, advertising and promotional expenses.

General and administrative expenses consist primarily of costs of personnel, legal, accounting and other public company costs, insurance and other expenses not allocated to other departments.

Results of Operations - 2010, 2009 and 2008

Our fiscal year ends on the Saturday closest to December 31. Fiscal 2010 ended on January 1 2011, fiscal 2009 ended on January 2, 2010, and fiscal 2008 ended on January 3, 2009. Consequently, fiscal years 2010 and 2009 included 52 weeks of operations while fiscal year 2008 included 53 weeks of operations.

The following table sets forth certain operating data as a percentage of revenue for the periods included.

 

     Percentage of Revenue Years Ended  
     FY 2010
Jan 1, 2011
    FY 2009
Jan 2, 2010
    FY 2008
Jan 3, 2009
 

Revenues:

      

Product revenues

     81.0     79.0     79.3

Service revenues

     19.0        21.0        20.7   
                        

Total revenues

     100.0        100.0        100.0   

Cost of revenues

     52.2        53.1        59.4   
                        

Gross margin

     47.8        46.9        40.6   

Operating expenses:

      

Research and development

     8.7        8.4        8.2   

Sales and marketing

     22.4        21.4        22.7   

General and administrative

     10.3        11.3        14.1   

Impairment of goodwill and intangible assets

     0.0        0.0        11.1   
                        

Total operating expense

     41.4        41.1        56.1   
                        

Income (loss) from operations

     6.4        5.8        (15.5

Legal settlement

     1.8        1.8        1.6   

Interest and other expense, net

     (0.2     (0.5     (1.0
                        

Other income, net

     1.6        1.3        0.6   
                        

Income (loss) before provision for income taxes

     8.0        7.1        (14.9

Provision for income taxes

     1.0        1.1        0.3   
                        

Net income (loss)

     7.0     6.0     (15.2 )% 
                        

 

28


Table of Contents

Comparison of 2010 and 2009

Revenues.

Total revenues for 2010 were $43.7 million compared with $43.2 million in 2009, an increase of $0.5 million or 1.0%. Our Ophthalmology business revenues, excluding our OEM line, increased $2.0 million or 6.6% driven by increases in demand globally for our ophthalmology systems due to new product introductions and increased capital spending in the healthcare industry as countries recover from the recent recession. These gains were offset by the phasing out of our OEM line and by reductions in aesthetics sales. We have seen some stability in our aesthetics business internationally with the improving economic situation overseas after the economic uncertainty experienced in Europe during our second quarter of 2010 while domestic sales are still challenged by lingering uncertainty in the US economy and competition remains strong across all geographies.

 

(in millions)

   FY 2010      FY 2009      Change in $     Change in %  

Ophthalmology systems - domestic

   $ 6.2       $ 5.2       $ 1.0        16.2

Ophthalmology systems - international

     9.2         7.8         1.4        14.3

Ophthalmology recurring revenues

     16.2         16.6         (0.4     (2.4 )% 

Ophthalmology OEM

     0.7         1.4         (0.7     (47.3 )% 
                                  

Total Ophthalmology revenues

   $ 32.3       $ 31.0       $ 1.3        4.1

Aesthetics systems - domestic

   $ 2.3       $ 2.5       $ (0.2     (6.1 )% 

Aesthetics systems - international

     3.7         3.8         (0.1     (1.1 )% 

Service revenues

     5.4         5.9         (0.5     (10.1 )% 
                                  

Total Aesthetics revenues

   $ 11.4       $ 12.2       $ (0.8     (6.5 )% 
                                  

Total revenues

   $ 43.7       $ 43.2       $ 0.5        1.0
                                  

Gross Profit.

Gross profit increased $0.6 million from $20.3 million in 2009 to $20.9 million in 2010. The increase in gross profits was driven primarily due to an improvement in gross margins from 46.9% to 47.8%. Direct margins improved 0.3%; manufacturing variances (which include inventory and warranty reserve movements and adjustments for overhead absorbed) were 0.4% of revenues compared to 1.0% of revenues in 2009; and manufacturing and service expenses as a percentage of revenues remained constant.

Research and Development.

Research and development (R&D) expenses increased $0.2 million or 5.7%, from $3.6 million in 2009 to $3.8 million in 2010. The increase is attributable to increases in material and personnel costs incurred in engineering development projects as the Company continues to focus on new product introductions.

Sales and Marketing.

Sales and marketing expenses increased $0.5 million or 5.7%, from $9.3 million in 2009 to $9.8 million in 2010. The increase is primarily attributable to increased personnel costs associated with increased headcount from 33 to 37.

General and Administrative.

General and administrative expenses decreased $0.4 million or 8.6%, from $4.9 million in 2009 to $4.5 million in 2010. The decrease is attributable to reduced bad debt expense, banking fees, and accounting and consulting services.

 

29


Table of Contents

Legal Settlement and Interest and Other Expense, net.

Income from the settlement with Synergetics of legal claims related to patents infringement amounted to $0.8 million for both periods. The Company anticipates receiving an additional $1.6 million in other income from the settlement, to be paid to the Company in two annual installments of $0.8 million on April 16, 2011 and April 16, 2012. During the first quarter of 2010 the Company repaid the amount outstanding on its loan balance and consequently interest and other expense, net, was reduced from $0.2 million to $0.1 million.

Income Taxes.

We recorded a provision for income taxes of $0.5 million and an effective tax rate of 13% for the year ended January 1, 2011 similar to a provision for income taxes of $0.5 million for the year ended January 2, 2010. Our tax rate is benefiting from a reduction in the valuation allowance we currently have booked against our deferred tax asset. Ultimately, assuming we remain profitable, the entire valuation reserve will be released and our tax rate will return to more normal levels. At the end of 2010 the valuation allowance totaled $12.1 million.

Comparison of 2009 and 2008

Revenues.

Total revenues for 2009 were $43.2 million compared with $48.5 million in 2008, a decrease of $5.3 million or 11.0%. The decrease in total revenues was primarily due to the global economic environment that resulted in reduced capital spending in the healthcare industry. The impact was felt more acutely in our aesthetics business which is largely driven by discretionary spending. We did see an impact on our domestic ophthalmology business on the capital side at the beginning of 2009 as our customers became very cautious with capital spending although there were signs of a recovery towards the end of the year, and we believe that the number of domestic ophthalmology procedures that use our consumable probe decreased during 2009 causing a drop in our recurring revenues. Our international ophthalmology business did see growth as the international markets have been faster to recover from the recession and the weak dollar has provided assistance. Our OEM revenue is generated from a long standing relationship and demand for the end user products has decreased. OEM revenues decreased $0.5 million or 27.1%, from $1.9 million to $1.4 million.

 

(in millions)

   FY 2009      FY 2008      Change in $     Change in %  

Ophthalmology systems - domestic

   $ 5.2       $ 6.0       $ (0.8     (13.2 )% 

Ophthalmology systems - international

     7.8         7.4         0.4        6.2

Ophthalmology recurring revenues

     16.6         17.1         (0.5     (2.9 )% 

Ophthalmology OEM

     1.4         1.9         (0.5     (27.1 )% 
                                  

Total Ophthalmology revenues

   $ 31.0       $ 32.4       $ (1.4     (4.2 )% 

Aesthetics systems - domestic

   $ 2.5       $ 2.2       $ 0.3        13.4

Aesthetics systems - international

     3.8         6.8         (3.0     (44.7 )% 

Service revenues

     5.9         7.1         (1.2     (16.9 )% 
                                  

Total Aesthetics revenues

   $ 12.2       $ 16.1       $ (3.9     (24.5 )% 
                                  

Total revenues

   $ 43.2       $ 48.5       $ (5.3     (11.0 )% 
                                  

Gross Profit.

Gross profit increased $0.6 million from $19.7 million in 2008 to $20.3 million in 2009. The increase in gross profit was primarily attributable to an improvement in gross margins (from 40.6% to 46.9%) because we were no longer suffering the negative impacts to cost of revenues associated with the amortization of intangible assets, partially offset by a decrease in revenues.

Research and Development.

Research and development (R&D) expenses decreased $0.4 million or 10.0%, from $4.0 million in 2008 to $3.6 million in 2009. The decrease was primarily attributable to a reduction in material costs consumed in engineering development projects , offset in part by an increase in salary and employee benefits associated with a headcount increase.

 

30


Table of Contents

Sales and Marketing.

Sales and marketing expenses decreased $1.7 million or 15.7%, from $11.0 million in 2008 to $9.3 million in 2009. The decrease was primarily attributable to decreased headcount associated with headcount reductions, decreased amortization expenses for intangible assets, and reductions in advertising and promotion, business travel, and lower commission expenses resulting from lower sales. In addition, at the end of June 2008, we transferred our operating activities in the UK to a third party distributor, which contributed to the decrease in sales and marketing spending subsequent to the transfer.

General and Administrative.

General and administrative expenses decreased $1.9 million or 28.8%, from $6.8 million in 2008 to $4.9 million in 2009. The decrease is primarily attributable to decreases in audit, accounting, tax and legal fees, and temporary help and consulting. In addition, at the end of June 2008, we transferred our operating activities in the UK to a third party distributor, which contributed to the decrease in general and administrative spending subsequent to the transfer.

Impairment of Goodwill and Intangible Assets.

In December 2008, in accordance with Impairment or Disposal of Long-Lived Assets Section of the Accounting Standards Codification (“ASC”) Subtopic 360-10, the Company performed its annual impairment test. Based on operating results for 2008 and the outlook for the aesthetics business for 2009 and beyond, management determined there was an impairment loss to goodwill of $3.2 million and goodwill was reduced from $3.2 million to $0. In addition the operating results for 2008 and the outlook for the aesthetics business for 2009 indicated that the carrying amount of the intangible assets may not be recoverable from future undiscounted cash flows. As a result, management tested the intangible assets to determine recoverability and consequently, in December 2008, a write down to the gross carrying value of intangible assets of $2.1 million was recorded reducing the gross carrying value from $8.6 million to $6.5 million. The net carrying value of all intangible assets as of January 3, 2009 was $1.5 million.

Legal Settlement and Interest and Other Expense, net.

Income from the settlement with Synergetics of legal claims related to patents infringement amounted to $0.8 million for 2009 and 2008. The Company will receive an additional $2.4 million in other income from the settlement, to be paid to the Company in three annual installments of $0.8 million on each April 16th until 2012. Interest and other expense, net consisting primarily of interest expense on bank debt, were $0.2 million and $0.5 million for 2009 and 2008, respectively.

Income Taxes.

We recorded a provision for income taxes of $496 thousand and an effective tax rate of 16% for the year ended January 2, 2010 compared to a provision for income taxes of $127 thousand for the year ended January 3, 2009. The increase in the provision for income taxes was primarily attributable to the increase in taxable income in the U.S.

Liquidity and Capital Resources

Comparison of 2010 and 2009

Liquidity is our ability to generate sufficient cash flows from operating activities to meet our obligations and commitments. In addition, liquidity includes the ability to obtain appropriate financing or to raise capital. During 2010 net cash provided by operating activities was $3.5 million which was generated primarily from net income of $3.0 million. This compares to net cash provided by operating activities in 2009 of $6.8 million which was generated from $2.6 million of net income plus $2.6 million from improvements in working capital.

As of January 1, 2011, we had cash and cash equivalents of $9.0 million, no debt outstanding and working capital of $17.2 million compared with cash and cash equivalents of $9.4 million, debt of $3.5 million and working capital of $13.2 million as of January 2, 2010.

Management is of the opinion that the Company’s current cash and cash equivalents together with our ability to generate cash flows from operations provide sufficient liquidity to operate for the next 12 months. In addition, the Company has a credit facility with Silicon Valley Bank for amounts up to $5 million.

 

31


Table of Contents

Comparison of 2009 and 2008

In 2009, net cash provided by operating activities was $6.8 million compared with $0.1 million being used in operating activities in 2008. In 2009, the net cash provided by operating activities resulted primarily from the net income generated during 2009 and a reduction in working capital. During 2008 we made repayments to AMS of $6.3 million including interest as a result of the settlement agreement reached in August of 2007. Excluding these payments cash from operations was positive $6.2 million. As of January 3, 2009 all amounts owed to AMS have been repaid.

Contractual Payment Obligations

Our contractual payment obligations that were fixed and determinable as of January 1, 2011 were as follows (in thousands):

 

     Payments Due by Period  
     Total      2011      2012      2013      2014      2015 and
thereafter
 

Operating leases payments

   $ 2,995       $ 690       $ 696       $ 710       $ 770       $ 129   

Total contractual cash obligations

   $ 2,995       $ 690       $ 696       $ 710       $ 770       $ 129   

Critical Accounting Policies

Our consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets and liabilities, net sales and expenses, and the related disclosures. We base our estimates on historical experience, our knowledge of economic and market factors and various other assumptions we believe to be reasonable under the circumstances. Actual results may differ from these estimates under different assumptions or conditions. We believe the following critical accounting policies are affected by significant estimates, assumptions, and judgments used in the preparation of our consolidated financial statements.

Revenue Recognition.

Our revenues arise from the sale of laser consoles, delivery devices, consumables and service and support activities. Revenue from product sales is recognized upon receipt of a purchase order and product shipment provided that no significant obligations remain and collection of the receivables is reasonably assured. Shipments are generally made with Free-On-Board (FOB) shipping point terms, whereby title passes upon shipment from our dock. Any shipments with FOB receiving point terms are recorded as revenue when the shipment arrives at the receiving point. Cost is recognized as product sales revenue is recognized. The Company’s sales may include post-sales obligations for training or other deliverables. For revenue arrangements such as these, we recognize revenue in accordance with the Revenue Recognition, Multiple-Element Arrangements Section of Subtopic ASC 605-25. When the Company has objective and reliable evidence of fair value of the undelivered elements, it defers revenue attributable to the post-sale obligations and recognizes such revenue when the obligation is fulfilled. Otherwise, the Company defers all revenue related to the transaction until all elements are delivered. Revenue relating to extended warranty contracts is recognized on a straight line basis over the period of the applicable warranty contract. We recognize repair service revenue upon completion of the work.

 

32


Table of Contents

Inventories.

Inventories are stated at the lower of cost or market and include on-hand inventory physically held at the Company’s facility, sales demo inventory and service loaner inventory. Cost is determined on a standard cost basis which approximates actual cost on a first-in, first-out (FIFO) method. Lower of cost or market is evaluated by considering obsolescence, excessive levels of inventory, deterioration and other factors. Adjustments to reduce the cost of inventory to its net realizable value, if required, are made for estimated excess, obsolete or impaired inventory and are charged to cost of revenues. Factors influencing these adjustments include changes in demand, product life cycle and development plans, component cost trends, product pricing, physical deterioration and quality issues. Revisions to these adjustments would be required if these factors differ from our estimates.

Sales Returns Allowance and Allowance for Doubtful Accounts.

The Company estimates future product returns related to current period product revenue. We analyze historical returns, and changes in customer demand and acceptance of our products when evaluating the adequacy of the sales returns allowance. Significant management judgment and estimates must be made and used in connection with establishing the sales returns allowance in any accounting period. Material differences may result in the amount and timing of our revenue for any period if management made different judgments or utilized different estimates. Our provision for sales returns is recorded net of the associated costs. The balance for the provision of sales returns, which is recorded to a deferred revenue account, was $209 thousand and $207 thousand as of January 1, 2011 and January 2, 2010, respectively.

Similarly management must make estimates regarding the uncollectability of accounts receivable. We are exposed to credit risk in the event of non-payment by customers to the extent of amounts recorded on the balance sheet. As of January 1, 2011, we had accounts receivable totaling $7.5 million, net of an allowance for doubtful accounts of $0.4 million. As sales levels increase the level of accounts receivable would likely also increase. In addition, in the event that customers were to delay their payments to us, the levels of accounts receivable would likely also increase. We maintain allowances for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments. The allowance for doubtful accounts is based on past payment history with the customer, analysis of the customer’s current financial condition, the aging of the accounts receivable balance, customer concentration and other known factors.

Warranty.

The Company accrues for estimated warranty costs upon shipment of products. Actual warranty costs incurred have not materially differed from those accrued. The Company’s warranty policy is applicable to products which are considered defective in their performance or fail to meet the product specifications. Warranty costs are reflected in the statement of operations as cost of revenues.

Income Taxes.

We account for income taxes in accordance with ASC 740, Income Taxes, which requires that deferred tax assets and liabilities be recognized using enacted tax rates for the effect of temporary differences between the book and tax bases of recorded assets and liabilities. Under ASC 740, the liability method is used in accounting for income taxes. Deferred tax assets and liabilities are determined based on the differences between financial reporting and the tax basis of assets and liabilities, and are measured using the enacted tax rates and laws that will be in effect when the differences are expected to reverse. ASC 740 also requires that deferred tax assets be reduced by a valuation allowance if it is more likely than not that some or all of the deferred tax asset will not be realized. We evaluate annually the realizability of our deferred tax assets by assessing our valuation allowance and by adjusting the amount of such allowance, if necessary. The factors used to assess the likelihood of realization include our forecast of future taxable income and available tax planning strategies that could be implemented to realize the net deferred tax assets. In 2010 and 2009, we have recorded a full valuation allowance for our deferred tax assets based on our past losses and uncertainty regarding our ability to project future taxable income. In future periods if we are able to generate income we may reduce or eliminate the valuation allowance.

Accounting for Uncertainty in Income Taxes.

We account for uncertain tax positions in accordance with ASC 740, Income Taxes. ASC 740 seeks to reduce the diversity in practice associated with certain aspects of measurement and recognition in accounting for income taxes. ASC 740 prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax provision that an entity takes or expects to take in a tax return. Additionally, ASC 740 provides guidance on de-recognition, classification, interest and penalties, accounting in interim periods, disclosures, and transition. Under ASC 740, an entity may only recognize or continue to recognize tax positions that meet a “more likely than not” threshold. In accordance with our accounting policy, we recognize accrued interests and penalties related to unrecognized tax benefits as a component of income tax expense. The impact on adoption of ASC 740 is more fully described in Note 14.

 

33


Table of Contents

Accounting for Stock-Based Compensation.

The Company accounts for stock-based compensation in accordance with ASC 718, Compensation – Stock Compensation (ASC 718) which establishes accounting for stock-based awards exchanged for employee services. Accordingly, stock-based compensation cost is measured at grant date, based on the fair value of the award, and is recognized as expense over the employee’s service period.

Stock-based compensation expense for fiscal 2009 and 2008 included compensation expense for all stock-based compensation awards granted prior to, but not yet vested as of January 1, 2006, based on the grant date fair value estimated in accordance with the original provision of ASC 718. Stock-based compensation expense for all stock-based compensation awards granted after January 1, 2006 is based on the grant-date fair value estimated in accordance with the provisions of ASC 718. The Company recognizes compensation expense on a straight-line basis over the requisite service period of the award.

We determined that the Black-Scholes option pricing model is the most appropriate method for determining the estimated fair value for stock options. The Black-Scholes model requires the use of highly subjective and complex assumptions which determine the fair value of share-based awards, including the option’s expected term and the price volatility of the underlying stock.

Recently Issued and Adopted Accounting Standards

In December 2010, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) 2010-29, Business Combinations (Topic 805): Disclosure of Supplementary Pro Forma Information for Business Combinations. ASU 2010-29 specifies that if a public entity presents comparative financial statements, the entity should disclose revenue and earnings of the combined entity as though the business combination(s) that occurred during the current year had occurred as of the beginning of the comparable prior annual reporting period only. The amendments in this Update also expand the supplemental pro forma disclosures under Topic 805 to include a description of the nature and amount of material, nonrecurring pro forma adjustments directly attributable to the business combination included in the reported pro forma revenue and earnings. ASU 2010-29 is effective prospectively for business combinations for which the acquisition date is on or after the beginning of the first annual reporting period beginning on or after December 15, 2010. Early adoption is permitted. We do not expect adoption of this standard to have a material impact on our financial position, results of operations, or cash flows.

In December 2010, the FASB issued ASU 2010-28, Intangibles - Goodwill and Other (Topic 350): When to Perform Step 2 of the Goodwill Impairment Test for Reporting Units with Zero or Negative Carrying Amounts . ASU 2010-28 modifies Step 1 of the goodwill impairment test so that for reporting units with zero or negative carrying amounts, an entity is required to perform Step 2 of the goodwill impairment test if it is more likely than not based on an assessment of qualitative indicators that goodwill impairment exists. In determining whether it is more likely than not that goodwill impairment exists, an entity should consider whether there are any adverse qualitative factors indicating that impairment may exist. ASU 2010-28 is effective for fiscal years, and interim periods within those years, beginning after December 15, 2010. Early adoption is not permitted. We do not expect adoption of this standard to have a material impact on our financial position, results of operations, or cash flows.

In February 2010, the FASB issued ASU 2010-09, Subsequent Events (Topic 855): Amendments to Certain Recognition and Disclosure Requirements. The amendments in the ASU remove the requirement for an SEC filer to disclose a date through which subsequent events have been evaluated in both issued and revised financial statements. ASU 2010-09 became effective immediately upon issuance. The adoption of this statement did not have a material impact on our financial position, results of operations, or cash flows.

In January 2010, the FASB issued accounting standards update on fair value measurement and disclosures, adding new requirements for disclosures for levels 1 and 2, separate disclosures and purchases, sales, issuances, and settlements relating to Level 3 measurements and clarification of existing fair value disclosures. This update was effective for interim and annual periods beginning after December 15, 2009, except for the requirement to provide Level 3 activity of purchases, sales, issuances, and settlements on a gross basis, which will be effective for fiscal years beginning after December 15, 2010. Early adoption is permitted. Other than requiring additional disclosures, adoption of this new guidance did not have a material impact on our financial position, results of operations, or cash flows.

 

34


Table of Contents

In October 2009, the FASB issued ASU 2009-13. ASU 2009-13 addresses the accounting for multiple-deliverable arrangements to enable vendors to account for products or services (“deliverables”) separately rather than as a combined unit. Specifically, this guidance amends the criteria in the “Revenue Recognition - Multiple-Element Arrangements” subtopic of the Codification for separating consideration in multiple-deliverable arrangements. This guidance establishes a selling price hierarchy for determining the selling price of a deliverable, which is based on: (a) vendor-specific objective evidence; (b) third-party evidence; or (c) estimates. This guidance also eliminates the residual method of allocation and requires that arrangement consideration be allocated at the inception of the arrangement to all deliverables using the relative selling price method. In addition, this guidance significantly expands required disclosures related to a vendor’s multiple-deliverable revenue arrangements. ASU 2009-13 is effective prospectively for revenue arrangements entered into or materially modified in fiscal years beginning on or after June 15, 2010, with the option to provide retrospective presentation for prior years. Early adoption is permitted. We do not expect the adoption of this standard to have a material impact on our financial position, results of operations, or cash flows.

Off-Balance Sheet Arrangements

The Company has no off-balance sheet arrangements.

 

Item 7A. Quantitative and Qualitative Disclosures About Market Risk.

Market risk represents the risk of loss that may impact the financial position, results of operations or cash flows due to adverse changes in financial and commodity market prices and rates. We transact the majority of our business in US dollars and therefore changes in foreign currency rates will not have a significant impact on our income statement or cash flows. However, increases in the value of the US dollar against any local currencies could cause our products to become relatively more expensive to customers in a particular country or region, leading to reduced revenue or profitability in that country or region. As we continue to expand our international sales, our non-US dollar denominated revenue and our exposure to gains and losses on international currency transactions may increase. Our French subsidiary does transact business in its local geography in Euros. We currently do not engage in transactions to hedge against the risk of the currency fluctuation, but we may do so in the future.

 

Item 8. Financial Statements and Supplementary Data.

Our consolidated balance sheets as of January 1, 2011 and January 2, 2010 and the consolidated statements of operations, comprehensive income (loss), stockholders’ equity and cash flows for each of the three years ending in the period January 1, 2011, January 2, 2010 and January 3, 2009 together with the related notes and the report of our independent auditors, are on the following pages. Additional required financial information is described in Item 15.

 

35


Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of IRIDEX Corporation

We have audited the accompanying consolidated balance sheets of IRIDEX Corporation as of January 1, 2011 and January 2, 2010, and the related consolidated statements of income, stockholders’ equity and comprehensive income, and cash flows for each of the years in the three year period ended January 1, 2011. Our audits also included the financial statement schedule listed in Item 15(a)(2). IRIDEX Corporation’s management is responsible for these consolidated financial statements and financial statement schedule. Our responsibility is to express an opinion on these consolidated financial statements and financial statement schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audit included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of IRIDEX Corporation as of January 1, 2011 and January 2, 2010, and the results of its operations and its cash flows for each of the years in the three year period ended January 1, 2011 in conformity with accounting principles generally accepted in the United States of America. Also, in our opinion, the related financial statement schedule, as of and for the years ended January 1, 2011, January 2, 2010 and January 3, 2009, when considered in relation to the consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

Burr Pilger Mayer, Inc.

East Palo Alto, California

March 24, 2011

 

36


Table of Contents

IRIDEX Corporation

CONSOLIDATED BALANCE SHEETS

(in thousands, except share and per share data)

 

     FY 2010
January 1,
2011
    FY 2009
January 2,
2010
 
ASSETS     

Current assets:

    

Cash and cash equivalents

   $ 9,014      $ 9,378   

Accounts receivable, net of allowance for doubtful accounts of $369 in 2010 and $754 in 2009

     7,526        7,482   

Inventories, net

     9,212        8,999   

Prepaid expenses and other current assets

     620        470   
                

Total current assets

     26,372        26,329   

Property and equipment, net

     360        486   

Other intangible assets, net

     1,797        1,153   

Goodwill

     473        —     

Other long term assets

     218        323   
                

Total assets

   $ 29,220      $ 28,291   
                
LIABILITIES AND STOCKHOLDERS’ EQUITY     

Current liabilities:

    

Accounts payable

   $ 1,981      $ 1,872   

Bank line of credit

     —          3,520   

Accrued compensation

     2,304        2,171   

Accrued expenses

     1,822        1,983   

Accrued warranty

     956        1,165   

Deferred revenue

     2,134        2,405   
                

Total current liabilities

     9,197        13,116   

Long term liabilities:

    

Other long-term liabilities

     596        149   
                

Total liabilities

     9,793        13,265   

Commitments and contingencies (Note 11)

    

Stockholders’ equity:

    

Convertible preferred stock, $.01 par value:

    

Authorized: 2,000,000 shares;
Issued and outstanding: 500,000 shares in 2010 and 2009

     5        5   

Common stock, $.01 par value:

    

Authorized: 30,000,000 shares;
Issued and outstanding: 8,986,418 shares in 2010 and 8,848,360 shares in 2009

     89        89   

Additional paid-in capital

     41,168        39,820   

Accumulated other comprehensive loss

     (205     (212

Treasury stock, at cost

     (430     (430

Accumulated deficit

     (21,200     (24,246
                

Total stockholders’ equity

     19,427        15,026   
                

Total liabilities and stockholders’ equity

   $ 29,220      $ 28,291   
                

The accompanying notes are an integral part of these consolidated financial statements.

 

37


Table of Contents

IRIDEX Corporation

CONSOLIDATED STATEMENTS OF OPERATIONS

(in thousands, except per share data)

 

     FY 2010
Year Ended
January 1,
2011
    FY 2009
Year Ended
January 2,
2010
    FY 2008
Year Ended
January 3,
2009
 

Revenues:

      

Product revenues

   $ 35,370      $ 34,121      $ 38,462   

Service revenues

     8,324        9,091        10,066   
                        

Total revenues

     43,694        43,212        48,528   

Cost of revenues

     22,791        22,939        28,849   
                        

Gross profit

     20,903        20,273        19,679   
                        

Operating expenses:

      

Research and development

     3,814        3,609        4,009   

Sales and marketing

     9,804        9,273        10,998   

General and administrative

     4,488        4,873        6,844   

Impairment of goodwill and intangible assets

     —          —          5,364   
                        

Total operating expenses

     18,106        17,755        27,215   
                        

Income (loss) from operations

     2,797        2,518        (7,536

Other income (expenses):

      

Legal settlement

     800        800        800   

Interest and other expense, net

     (78     (237     (507
                        

Income (loss) before provision for income taxes

     3,519        3,081        (7,243

Provision for income taxes

     473        496        127   
                        

Net income (loss)

   $ 3,046      $ 2,585      $ (7,370
                        

Net income (loss) per common share - basic

   $ 0.34      $ 0.29      $ (0.84
                        

Net income (loss) per common share - diluted

   $ 0.30      $ 0.26      $ (0.84
                        

Shares used in computing net income (loss) per common share - basic

     8,943        8,840        8,824   
                        

Shares used in computing net income (loss) per common share - diluted

     10,134        9,940        8,824   
                        

IRIDEX Corporation

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)

(in thousands)

 

     FY 2010
Year Ended
January 1,
2011
     FY 2009
Year Ended
January 2,
2010
    FY 2008
Year Ended
January 3,
2009
 

Net income (loss)

   $ 3,046       $ 2,585      $ (7,370

Foreign currency translation adjustments

     7         (20     (104
                         

Comprehensive income (loss)

   $ 3,053       $ 2,565      $ ($7,474
                         

The accompanying notes are an integral part of these consolidated financial statements.

.

 

38


Table of Contents

IRIDEX Corporation

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY

(in thousands, except share data)

 

     Convertible
Preferred Stock
     Common Stock      Additional
Paid-in
Capital
     Treasury
Stock
    Accumulated
Other
Comprehensive
Income (Loss)
    Accumulated
Deficit
    Total  
     Shares      Amount      Shares      Amount              

FY 2007: Balances, December 29, 2007

     500,000       $ 5         8,824,301       $ 89       $ 38,695       $ (430   $ (88   $ (19,461   $ 18,810   

Employee stock-based compensation expense

                 322               322   

Tax effect of stock compensation expense

                 88               88   

Foreign currency translation adjustments

                      (104       (104

Net loss

                        (7,370     (7,370
                                                                             

FY 2008: Balances, January 3, 2009

     500,000       $ 5         8,824,301       $ 89       $ 39,105       $ (430   $ (192   $ (26,831   $ 11,746   

Issuance of common stock under stock option plan

           4,059            5               5   

Employee stock-based compensation expense

                 360               360   

Tax effect of stock compensation expense

                 350               350   

Foreign currency translation adjustments

                      (20       (20

Exercise of common stock warrants, $0.01 per share

           20,000                  

Net Income

                        2,585        2,585   
                                                                             

FY 2009: Balances, January 2, 2010

     500,000       $ 5         8,848,360       $ 89       $ 39,820       $ (430   $ (212   $ (24,246   $ 15,026   

Issuance of common stock under stock option plan

           34,558            88               88   

Employee stock-based compensation expense

                 551               551   

Tax effect of stock compensation expense

                 1               1   

Foreign currency translation adjustments

                      7          7   

Issuance of common stock in connection with RetinaLabs acquisition

           103,500            444               444   

Contingent consideration - shares of common stock in connection with RetinaLabs acquisition

                 264               264   

Net Income

                        3,046        3,046   
                                                                             

FY 2010: Balances, January 1, 2011

     500,000       $ 5         8,986,418       $ 89       $ 41,168       $ (430   $ (205   $ (21,200   $ 19,427   
                                                                             

 

The accompanying notes are an integral part of these consolidated financial statements.

 

39


Table of Contents

IRIDEX Corporation

CONSOLIDATED STATEMENTS OF CASH FLOWS

(in thousands)

 

     FY 2010
Year Ended
January 1,
2011
    FY 2009
Year Ended
January 2,
2010
    FY 2008
Year Ended
January 3,
2009
 

Operating activities:

      

Net income (loss)

   $ 3,046      $ 2,585      $ (7,370

Adjustments to reconcile net income (loss) to net cash used in operating activities:

      

Loss on disposal of assets

     —          —          136   

Depreciation and amortization

     515        899        3,221   

Impairment of goodwill and intangible assets

     —          —          5,364   

Stock compensation cost recognized

     551        360        322   

Tax effect of stock compensation expense

     1        350        88   

Provision for doubtful accounts

     —          126        208   

Provision for inventory reserves

     (3     (138     1,442   

Changes in operating assets and liabilities, net of assets and liabilities acquired:

      

Accounts receivable

     (44     591        469   

Inventories

     (210     2,783        2,881   

Prepaid expenses and other current assets

     (150     70        511   

Other long term assets

     105        (94     118   

Accounts payable

     109        (543     (472

Accrued compensation

     133        442        (295

Accrued expenses

     (94     (117     (5,560

Accrued warranty

     (209     (180     (550

Deferred revenue

     (271     (336     (609
                        

Net cash provided by (used in) operating activities

     3,479        6,798        (96
                        

Investing activities:

      

Acquisition of property and equipment

     (193     (232     (223

Purchases of RetinaLabs

     (225     —          —     
                        

Net cash used in investing activities

     (418     (232     (223
                        

Cash flows from financing activities:

      

Proceeds from stock option exercises

     88        5        —     

Proceeds from borrowings

     5,876        42,308        44,777   

Repayment of borrowings

     (9,396     (44,788     (48,656

Release of funds under debt facility

     —          —          3,800   
                        

Net cash used in financing activities

     (3,432     (2,475     (79
                        

Effect of foreign exchange rate changes

     7        (20     (104

Net increase (decrease) in cash and cash equivalents

     (364     4,071        (502

Cash and cash equivalents, beginning of year

     9,378        5,307        5,809   
                        

Cash and cash equivalents, end of year

   $ 9,014      $ 9,378      $ 5,307   
                        

Supplemental disclosure of cash flow information:

      

Cash paid during the year for:

      

Income taxes

   $ 439      $ 160      $ 20   

Interest paid

   $ 57      $ 242      $ 691   

Supplemental disclosure of non-cash activities:

      

Share issued at acquisition

   $ 444      $ —        $ —     

Contingent consideration - cash

   $ 380      $ —        $ —     

Contingent consideration - shares

   $ 264      $ —        $ —     

The accompanying notes are an integral part of these consolidated financial statements.

 

40


Table of Contents

IRIDEX Corporation

Notes to Consolidated Financial Statements

1. Business of the Company

Description of Business.

IRIDEX Corporation is a worldwide provider of therapeutic-based laser systems, delivery devices and consumable instrumentation used to treat eye diseases in ophthalmology and skin conditions in dermatology (also referred to as aesthetics). Our products are sold in the United States predominantly through a direct sales force and internationally through approximately 100 independent distributors in 107 countries.

2. Summary of Significant Accounting Policies

Financial Statement Presentation.

The consolidated financial statements include the accounts of IRIDEX Corporation and our wholly owned subsidiaries. All significant intercompany accounts and transactions have been eliminated in consolidation. Except as noted below, the Company has determined that the local currency of the country where the subsidiary is located is the functional currency for those foreign operations. Assets and liabilities were translated into their US dollar equivalent using the spot rate at the balance sheet date. Operating results were translated using average exchange rates for the period. Accordingly, translation adjustments for foreign subsidiaries are included as a component of accumulated other comprehensive loss. The Company’s UK subsidiary ceased operating activities in the third fiscal quarter of 2008. An independent distributor took over the responsibility for sales and service of our aesthetics products in the UK. Consequently at the start of the fourth quarter of 2008 in accordance with ASC 830, Foreign Currency Matters, management determined that the primary economic environment in which the entity was operating had changed to the US dollar and therefore the functional currency was changed to the US dollar. Effective at the start of the fourth quarter of 2008, non-monetary assets and liabilities were translated into their US dollar equivalent at the historical rate. Monetary assets and liabilities were translated at a spot rate at the balance sheet date, and the operating results were translated using average exchange rates for the period. Translation adjustments are included in “Interest and other expense, net” in the period in which they occur.

Our fiscal year always ends on the Saturday closest to December 31. Fiscal 2010 ended on January 1, 2011, fiscal 2009 ended on January 2, 2010, and fiscal 2008 ended on January 3, 2009. Consequently, fiscal 2010 and fiscal 2009 included 52 weeks of operations while fiscal year 2008 included 53 weeks.

Use of Estimates.

The preparation of consolidated financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues, and expenses and the related disclosure of contingent assets and liabilities. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent form other sources. Actual results may differ from these estimates. In addition, any change in these estimates or their related assumptions could have an adverse effect on our operating results.

Cash and Cash Equivalents.

We consider all highly liquid debt instruments with insignificant interest rate risk and an original maturity of three months or less when purchased to be cash equivalents. Cash equivalents consist primarily of cash deposits in money market funds that are available for withdrawal without restriction.

Sales Returns Allowance and Allowance for Doubtful Accounts.

The Company estimates future product returns related to current period product revenue. We analyze historical returns, and changes in customer demand and acceptance of our products when evaluating the adequacy of the sales returns allowance. Significant management judgment and estimates must be made and used in connection with establishing the sales returns allowance in any accounting period. Material differences may result in the amount and timing of our revenue for any period if management made different judgments or utilized different estimates. Our provision for sales returns is recorded net of the associated costs. The balance for the provision of sales returns was $209 thousand and $207 thousand as of January 1, 2011 and January 2, 2010, respectively.

 

41


Table of Contents

Similarly management must make estimates regarding the uncollectability of accounts receivable. We are exposed to credit risk in the event of non-payment by customers to the extent of amounts recorded on the balance sheet. As of January 1, 2011, we had accounts receivable totaling $7.5 million, net of an allowance for doubtful accounts of $0.4 million. As of January 2, 2010, we had accounts receivable totaling $7.5 million, net of an allowance for doubtful accounts of $0.8 million. As sales levels change the level of accounts receivable would likely also change. In addition, in the event that customers were to delay their payments to us, the levels of accounts receivable would likely increase. We maintain allowances for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments. The allowance for doubtful accounts is based on past payment history with the customer, analysis of the customer’s current financial condition, the aging of the accounts receivable balance, customer concentration and other known factors.

Inventories.

Inventories are stated at the lower of cost or market and include on-hand inventory physically held at the Company’s facility, sales demo inventory and service loaner inventory. Cost is determined on a standard cost basis which approximates actual cost on a first-in, first-out (FIFO) method. Lower of cost or market is evaluated by considering obsolescence, excessive levels of inventory, deterioration and other factors. Adjustments to reduce the cost of inventory to its net realizable value, if required, are made for estimated excess, obsolescence or impaired inventory and are charged to cost of revenues. Factors influencing these adjustments include changes in demand, product life cycle and development plans, component cost trends, product pricing, physical deterioration and quality issues. Revisions to these adjustments would be required if these factors differ from our estimates.

As part of our normal business, we generally utilize various finished goods inventory as either sales demos to facilitate the sale of our products to prospective customers, or as loaners that we allow our existing customers to use while we repair their products. The Company is amortizing these demos and loaners over an estimated useful life of four years. The amortization of the demos is charged to sales expense while the amortization on the loaners is charged to cost of revenues. The gross value of demos and loaners was $2.0 million and $1.7 million and the accumulated amortization was $1.1 million and $1.1 million as of January 1, 2011 and January 2, 2010, respectively. The amortization of demos and loaners are transferred to the applicable reserve accounts when they are returned from the field, or the related accumulated amortization are credited to cost of goods when such demos or loaners are sold. In fiscal 2010, the demos and loaners amortization were offset by such activities, thereby the accumulated amortization remaining level with 2009.

Property and Equipment.

Property and equipment are stated at cost less accumulated depreciation and amortization. Depreciation and amortization are provided on a straight–line basis over the estimated useful lives of the assets, which is generally three years. Our net property and equipment was $0.4 million at the end of fiscal 2010 and $0.5 million at the end of fiscal 2009. We invested $0.2 million in property and equipment in both 2010 and 2009. Capital expenditures in fiscal 2010 have been primarily for software and computer equipment, and manufacturing equipment. In fiscal 2009, capital expenditures have been primarily for software and computer equipment.

Valuation of Goodwill and Intangible Assets.

The purchase method of accounting for acquisitions requires estimates and assumptions to allocate the purchase price to the fair value of net tangible and intangible assets acquired with any excess value being recorded as goodwill. There are a number of generally accepted valuation methods used to estimate fair value of intangible assets, and we use primarily a discounted cash flow method, which requires significant management judgment to forecast the future operating results and to estimate the discount factors used in the analysis. The amounts allocated to, and the useful lives estimated for intangible assets affect future amortization.

Goodwill and intangible assets determined to have indefinite lives are not amortized, but are subject to an annual impairment test in accordance with ASC 350, Intangibles - Goodwill and Other. See Note 7 – Goodwill, in Notes to Consolidated Financial Statements. Intangible assets with definite lives are amortized over the useful life of the asset.

We review our amortizing intangible assets for impairment whenever events or changes in circumstances indicate that their carrying value may not be recoverable. An asset is considered impaired if its carrying amount exceeds the future non-discounted net cash flow the asset is expected to generate. If an asset is considered to be impaired, the impairment to be recognized is measured by the amount by which the carrying amount of the asset exceeds its fair value. In such circumstances, the Company conducts an impairment analysis in accordance with Impairment or Disposal of Long-Lived Assets Section of ASC 360, Property, Plant and Equipment. See Note 8 – Intangible Assets, in Notes to Consolidated Financial Statements.

 

42


Table of Contents

Revenue Recognition.

Our revenues arise from the sale of laser consoles, delivery devices, consumables and service and support activities. Revenue from product sales is recognized upon receipt of a purchase order and product shipment provided that no significant obligations remain and collection of the receivables is reasonably assured. Shipments are generally made with Free-On-Board (FOB) shipping point terms, whereby title passes upon shipment from our dock. Any shipments with FOB receiving point terms are recorded as revenue when the shipment arrives at the receiving point. Cost is recognized as product sales revenue is recognized. The Company’s sales may include post-sales obligations for training or other deliverables. For revenue arrangements such as these, we recognize revenue in accordance with ASC 605, Revenue Recognition, Multiple-Element Arrangements. When the Company has objective and reliable evidence of fair value of the undelivered elements, it defers revenue attributable to the post-sale obligations and recognizes such revenue when the obligation is fulfilled. Otherwise, the Company defers all revenue related to the transaction until all elements are delivered. Revenue relating to service contracts is recognized on a straight line basis over the period of the applicable service contract. We recognize repair service revenue upon completion of the work.

In international regions outside of France, we utilize distributors to market and sell our products. We recognize revenue upon shipment for sales to these independent, third party distributors as we have no continuing obligations subsequent to shipment. Generally our distributors are responsible for all marketing, sales, installation, training and warranty labor coverage for our products. Our standard terms and conditions do not provide price protection or stock retention rights to any of our distributors.

Taxes Collected from Customers and Remitted to Governmental Authorities.

Taxes collected from customers and remitted to governmental authorities are recognized on a net basis in the accompanying consolidated statements of operations.

Deferred Revenue.

Revenue related to service contracts is deferred and recognized on a straight line basis over the period of the applicable service period. Costs associated with these service arrangements are recognized as incurred. A reconciliation of the changes in the Company’s deferred revenue balances for the years ended January 1, 2011 and January 2, 2010 is provided as follows (in thousands):

 

FY 2008: Balance, January 3, 2009

   $ 2,741   

Additions to deferral

     6,101   

Revenue recognized

     (6,437
        

FY 2009: Balance, January 2, 2010

   $ 2,405   

Additions to deferral

     5,039   

Revenue recognized

     (5,310
        

FY 2010: Balance, January 1, 2011

   $ 2,134   
        

Warranty.

The Company accrues for estimated warranty costs upon shipment of products. Actual warranty costs incurred have not materially differed from the amounts accrued. The Company’s warranty policy is applicable to products which are considered defective in their performance or fail to meet the product specifications. Warranty costs are reflected in the statement of operations as cost of revenues. A reconciliation of the changes in the Company’s warranty liability for the years ended January 1, 2011 and January 2, 2010, is provided as follows (in thousands):

 

FY 2008: Balance, January 3, 2009

   $ 1,345   

Accruals for product warranties

     179   

Cost of warranty claims

     (359
        

FY 2009: Balance, January 2, 2010

   $ 1,165   

Accruals for product warranties

     206   

Cost of warranty claims

     (415
        

FY 2010: Balance, January 1, 2011

   $ 956   
        

Shipping and handling costs.

Our shipping and handling costs billed to customers are included in revenues and the associated expense is recorded in cost of revenues for all periods presented. Shipping and handling costs amounted to $0.3 million, $0.3 million and $0.4 million for the years ended January 1, 2011, January 2, 2010 and January 3, 2009, respectively.

Research and Development.

Research and development expenditures are charged to operations as incurred.

 

43


Table of Contents

Advertising.

Advertising and promotion costs are expensed as they are incurred; such costs were approximately $307 thousand in 2010, $350 thousand in 2009, and $322 thousand in 2008 and are included in sales and marketing expenses in the accompanying consolidated statements of operations.

Income Taxes.

We account for income taxes in accordance with ASC 740, Income Taxes, which requires that deferred tax assets and liabilities be recognized using enacted tax rates for the effect of temporary differences between the book and tax bases of recorded assets and liabilities. Under ASC 740, the liability method is used in accounting for income taxes. Deferred tax assets and liabilities are determined based on the differences between financial reporting and the tax basis of assets and liabilities, and are measured using the enacted tax rates and laws that will be in effect when the differences are expected to reverse. ASC 740 also requires that deferred tax assets be reduced by a valuation allowance if it is more likely than not that some or all of the deferred tax asset will not be realized. We evaluate annually the realizability of our deferred tax assets by assessing our valuation allowance and by adjusting the amount of such allowance, if necessary. The factors used to assess the likelihood of realization include our forecast of future taxable income and available tax planning strategies that could be implemented to realize the net deferred tax assets. In 2010 and 2009, we have recorded a full valuation allowance for our deferred tax assets based on our past losses and uncertainty regarding our ability to project future taxable income. In future periods if we are able to generate income we may reduce or eliminate the valuation allowance.

Accounting for Uncertainty in Income Taxes.

We account for uncertain tax positions in accordance with ASC 740, Income Taxes. ASC 740 seeks to reduce the diversity in practice associated with certain aspects of measurement and recognition in accounting for income taxes. ASC 740 prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax provision that an entity takes or expects to take in a tax return. Additionally, ASC 740 provides guidance on de-recognition, classification, interest and penalties, accounting in interim periods, disclosures, and transition. Under ASC 740, an entity may only recognize or continue to recognize tax positions that meet a “more likely than not” threshold. In accordance with our accounting policy, we recognize accrued interests and penalties related to unrecognized tax benefits as a component of income tax expense. The impact on adoption of ASC 740 is more fully described in Note 14.

Accounting for Stock-Based Compensation.

The Company accounts for stock-based compensation in accordance with ASC 718, Compensation – Stock Compensation (ASC 718) which establishes accounting for stock-based awards exchanged for employee services. Accordingly, stock-based compensation cost is measured at grant date, based on the fair value of the award, and is recognized as expense over the employee’s service period.

Stock-based compensation expense for fiscal 2009 and 2008 included compensation expense for all stock-based compensation awards granted prior to, but not yet vested as of January 1, 2006, based on the grant date fair value estimated in accordance with the original provision of ASC 718. Stock-based compensation expense for all stock-based compensation awards granted after January 1, 2006 is based on the grant-date fair value estimated in accordance with the provisions of ASC 718. The Company recognizes compensation expense on a straight-line basis over the requisite service period of the award.

We determined that the Black-Scholes option pricing model is the most appropriate method for determining the estimated fair value for stock options. The Black-Scholes model requires the use of highly subjective and complex assumptions which determine the fair value of share-based awards, including the option’s expected term and the price volatility of the underlying stock.

Concentration of Credit Risk and Other Risks and Uncertainties.

The Company’s cash and cash equivalents are deposited in demand and money market accounts. Deposits held with banks may exceed the amount of insurance provided on such deposits. Generally these deposits may be redeemed upon demand and therefore, bear minimal risk.

The Company markets its products to distributors and end-users throughout the world. Sales to international distributors are generally made on open credit terms and letters of credit. Management performs ongoing credit evaluations of our customers and maintains an allowance for potential credit losses. Historically, the Company has not experienced any significant losses related to individual customers or a group of customers in any particular geographic area. For the years ended January 1, 2011, January 2, 2010, and January 3, 2009 no single customer accounted for greater than 10% of total sales. No single customer accounted for more than 10% of our net accounts receivable balance as of January 1, 2011 and January 2, 2010.

 

44


Table of Contents

The Company’s products require approvals from the Food and Drug Administration and international regulatory agencies prior to commercialized sales. The Company’s future products may not receive required approvals. If the Company were denied such approvals, or if such approvals were delayed, it would have a materially adverse impact on the Company’s business, results of operations and financial condition.

Reliance on Certain Suppliers.

Certain components and services used by the Company to manufacture and develop its products are presently available from only one or a limited number of suppliers or vendors. The loss of any of these suppliers or vendors would potentially require a significant level of hardware and/or software development efforts to incorporate the products or services into the Company’s products.

Net Income (Loss) per Share.

Net income (loss) per share is computed in accordance with ASC 260, Earnings per Share. Basic net income (loss) per share is based upon the weighted average number of common shares outstanding during the period. Diluted net income (loss) per share is based upon the weighted average number of common shares outstanding and dilutive common stock equivalents outstanding during the period. Common stock equivalents consist of incremental common shares issuable upon the exercise of stock options and the conversion of Series A Preferred Stock into common stock and are calculated under the treasury stock method. Common stock equivalent shares from unexercised stock options and the conversion of Series A Preferred Stock are excluded from the computation for periods in which the Company incurs a loss as their effect is anti-dilutive or if the exercise price of such options is greater than the average market price of the stock for the period. See Note 16 - Computation of Basic and Diluted Net Income (Loss) Per Common Share, in Notes to Consolidated Financial Statements.

Recently Issued and Adopted Accounting Standards

In December 2010, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) 2010-29, Business Combinations (Topic 805): Disclosure of Supplementary Pro Forma Information for Business Combinations. ASU 2010-29 specifies that if a public entity presents comparative financial statements, the entity should disclose revenue and earnings of the combined entity as though the business combination(s) that occurred during the current year had occurred as of the beginning of the comparable prior annual reporting period only. The amendments in this Update also expand the supplemental pro forma disclosures under Topic 805 to include a description of the nature and amount of material, nonrecurring pro forma adjustments directly attributable to the business combination included in the reported pro forma revenue and earnings. ASU 2010-29 is effective prospectively for business combinations for which the acquisition date is on or after the beginning of the first annual reporting period beginning on or after December 15, 2010. Early adoption is permitted. We do not expect adoption of this standard to have a material impact on our financial position, results of operations, or cash flows.

In December 2010, the FASB issued ASU 2010-28, Intangibles - Goodwill and Other (Topic 350): When to Perform Step 2 of the Goodwill Impairment Test for Reporting Units with Zero or Negative Carrying Amounts . ASU 2010-28 modifies Step 1 of the goodwill impairment test so that for reporting units with zero or negative carrying amounts, an entity is required to perform Step 2 of the goodwill impairment test if it is more likely than not based on an assessment of qualitative indicators that goodwill impairment exists. In determining whether it is more likely than not that goodwill impairment exists, an entity should consider whether there are any adverse qualitative factors indicating that impairment may exist. ASU 2010-28 is effective for fiscal years, and interim periods within those years, beginning after December 15, 2010. Early adoption is not permitted. We do not expect adoption of this standard to have a material impact on our financial position, results of operations, or cash flows.

In February 2010, the FASB issued ASU 2010-09, Subsequent Events (Topic 855): Amendments to Certain Recognition and Disclosure Requirements. The amendments in the ASU remove the requirement for an SEC filer to disclose a date through which subsequent events have been evaluated in both issued and revised financial statements. ASU 2010-09 became effective immediately upon issuance. The adoption of this statement did not have a material impact on our financial position, results of operations, or cash flows.

In January 2010, the FASB issued accounting standards update on fair value measurement and disclosures, adding new requirements for disclosures for levels 1 and 2, separate disclosures and purchases, sales, issuances, and settlements relating to Level 3 measurements and clarification of existing fair value disclosures. This update was effective for interim and annual periods beginning after December 15, 2009, except for the requirement to provide Level 3 activity of purchases, sales, issuances, and settlements on a gross basis, which will be effective for fiscal years beginning after December 15, 2010. Early adoption is permitted. Other than requiring additional disclosures, adoption of this new guidance did not have a material impact on our financial position, results of operations, or cash flows.

 

45


Table of Contents

In October 2009, the FASB issued ASU 2009-13. ASU 2009-13 addresses the accounting for multiple-deliverable arrangements to enable vendors to account for products or services (“deliverables”) separately rather than as a combined unit. Specifically, this guidance amends the criteria in the “Revenue Recognition – Multiple-Element Arrangements” subtopic of the Codification for separating consideration in multiple-deliverable arrangements. This guidance establishes a selling price hierarchy for determining the selling price of a deliverable, which is based on: (a) vendor-specific objective evidence; (b) third-party evidence; or (c) estimates. This guidance also eliminates the residual method of allocation and requires that arrangement consideration be allocated at the inception of the arrangement to all deliverables using the relative selling price method. In addition, this guidance significantly expands required disclosures related to a vendor’s multiple-deliverable revenue arrangements. ASU 2009-13 is effective prospectively for revenue arrangements entered into or materially modified in fiscal years beginning on or after June 15, 2010, with the option to provide retrospective presentation for prior years. Early adoption is permitted. We do not expect the adoption of this standard to have a material impact on our financial position, results of operations, or cash flows.

3. Business Combination

On April 8, 2010, the Company acquired substantially all of the assets of RetinaLabs, Inc. (“RetinaLabs”). Pursuant to the terms of the purchase agreement, the Company acquired RetinaLabs’ existing product family together with certain additional intellectual property that the Company anticipates incorporating into future products. The purchase price for the acquired assets consisted of $250 thousand in cash consideration and 115,000 unregistered shares of the Company’s common stock issued at closing, and an earn-out. The earn-out is tied to future revenues and could result in additional cash and share consideration to RetinaLabs based on the future performance of the acquired products and intellectual property.

In accordance with ASC 805, Business Combinations, the acquisition has been accounted for as a purchase business combination. Under the purchase method of accounting, the assets acquired from RetinaLabs at the date of acquisition are recorded in the consolidated financial statements at their respective fair values as of the acquisition date. The excess of the purchase price over the fair value of the acquired net assets has been recorded as goodwill in the amount of $473 thousand. This goodwill is expected to be non-deductible for tax purposes. The purchase price includes the fair value of the earn-out which is recorded as a long-term liability and the fair value of the contingent consideration for additional shares which is recorded in equity.

We incurred $76 thousand of direct costs associated with the acquisition that were expensed as a component of general and administrative expense in the first quarter 2010. The amounts of revenue and earnings of the acquiree since the acquisition date are included in the consolidated statement of operations for the reporting period and have been immaterial to the consolidated financial statements. The financial results of RetinaLabs prior to the acquisition are immaterial for purposes of pro forma financial disclosures.

The determination of estimated fair value of acquired assets and liabilities requires management to make significant estimates and assumptions. We determined the fair value by applying established valuation techniques, based on information that management believed to be relevant to this determination. The following table summarizes the purchase price allocation of the fair value of the assets acquired at the date of acquisition:

 

46


Table of Contents

The purchase price was as follows (in thousands):

 

At time of acquisition:

  

Cash, net of escrow

   $ 225   

Shares issued, net of escrow

     444   

Earn-out:

  

Net present value of additional cash including escrow

     380   

Net present value of additional shares including escrow

     264   
        

Total purchase price

   $ 1,313   
        

The cost of the acquisition was allocated as follows (in thousands):

 

Identifiable intangible assets:

  

Patents

   $ 600   

Customer-related

     240   

Goodwill

     473   
        

Total purchase price

   $ 1,313   
        

Valuing certain components of the acquisition, including primarily identifiable intangible assets, goodwill, and the earn out liability, required us to make estimates that may be adjusted in the future.

Identifiable intangible assets. Intangible assets included in the purchase price allocation consist of: (a) technology patents of $600 thousand assigned an economic useful life whereby the economic value of the asset is its ability to provide the Company relief from royalty and is being amortized as a percentage of revenues generated per units sold, and (b) customer-related intangible assets of $240 thousand assigned an economic life of 15 years being amortized on the straight line method.

Goodwill. Approximately $473 thousand has been allocated to goodwill. Goodwill represents the excess of the purchase price over the fair value of the underlying net tangible and intangible assets. In accordance with ASC 350-20, Goodwill, is not amortized but instead is tested for impairment at least annually (more frequently if certain indicators are present). In the event that management determines that the value of goodwill has become impaired, an accounting charge for the amount of impairment is incurred in the fiscal quarter in which the determination is made. The Company believes the goodwill realized was the result of a number of factors, including the following: expected revenue growth opportunities for existing products and the opportunity to commercialize acquired intellectual property.

4. Fair Value Measurement

Fair value is defined as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. The fair value hierarchy distinguishes between (1) market participant assumptions developed based on market data obtained from independent sources (observable inputs) and (2) an entity’s own assumptions about market participant assumptions developed based on the best information available in the circumstances (unobservable inputs). The fair value hierarchy consists of three broad levels, which gives the highest priority to unadjusted quoted prices in active markets for identical assets or liabilities (Level 1) and the lowest priority to unobservable inputs (Level 3). The three levels of the fair value hierarchy are described below:

 

   

Level 1: Quoted prices (unadjusted) in active markets that are accessible at the measurement date for assets or liabilities.

 

47


Table of Contents
   

Level 2: Directly or indirectly observable inputs as of the reporting date through correlation with market data, including quoted prices for similar assets and liabilities in active markets and quoted prices in markets that are not active. Level 2 also includes assets and liabilities that are valued using models or other pricing methodologies that do not require significant judgment since the input assumptions used in the models, such as interest rates and volatility factors, are corroborated by readily observable data from actively quoted markets for substantially the full term of the financial instrument.

 

   

Level 3: Unobservable inputs that are supported by little or no market activity and reflect the use of significant management judgment. These values are generally determined using pricing models for which the assumptions utilize management’s estimates of market participant assumptions.

In determining fair value, the Company utilizes valuation techniques that maximize the use of observable inputs and minimize the use of unobservable inputs to the extent possible as well as considers counterparty credit risk in its assessment of fair value.

The carrying amounts of the Company’s financial assets and liabilities, including cash and cash equivalents, accounts receivable, and accounts payable at January 1, 2011 and January 2, 2010, approximate fair value because of the short maturity of these instruments.

As of January 1, 2011 and January 2, 2010, financial assets and liabilities measured and recognized at fair value on a recurring basis and classified under the appropriate level of the fair value hierarchy as described above was as follows (in thousands):

 

     FY 2010: January 1, 2011      FY 2009: January 2, 2010  
     Fair Value Measurements      Fair Value Measurements  
     Level 1      Level 2      Level 3      Total      Level 1      Level 2      Level 3      Total  

Assets:

                       

Money market funds

   $ 8,158             $ 8,158       $ 6,261             $ 6,261   

Liabilities:

                       

Contingent consideration - cash

         $ 380       $ 380               

The Company’s Level 1 financial assets are money market funds whose fair values are based on quoted market prices. The Company does not have any Level 2 financial assets or liabilities. The Company’s Level 3 financial liabilities are related to the fair value of the contingent consideration (the earn-out to be paid in cash) in connection with the RetinaLabs acquisition. At January 1, 2011, observable market information was not available to determine the fair value of the Company’s contingent consideration. Therefore, the fair value is based on valuation models that relied on Level 3 inputs including those that are based on probability of outcomes, expected cash flow streams, market discount rates and overall capital market liquidity. The valuation of the earn-out liability related to the RetinaLabs acquisition is subject to uncertainties that are difficult to predict.

The following table provides a reconciliation of the beginning and ending balances of the contingent consideration – cash (Level 3 liabilities) (in thousands):

 

Balance as of January 2, 2010

   $   

Addition of contingent consideration - cash related to RetinaLabs acquisition

     380   

Change in fair value of contingent consideration

       
        

Balance as of January 1, 2011

   $ 380   
        

5. Inventories

The components of the Company’s inventories are as follows (in thousands):

 

     FY 2010
January 1,
2011
     FY 2009
January 2,
2010
 

Raw materials and work in process

   $ 5,222       $ 5,069   

Finished goods

     3,990         3,930   
                 

Total inventories, net

   $ 9,212       $ 8,999   
                 

6. Property and Equipment

The components of the Company’s property and equipment are as follows (in thousands):

 

     FY 2010
January 1,
2011
    FY 2009
January 2,
2010
 

Equipment

   $ 6,803      $ 6,610   

Leasehold improvements

     2,236        2,236   

Less: accumulated depreciation and amortization

     (8,679     (8,360
                

Property and equipment, net

   $ 360      $ 486   
                

 

48


Table of Contents

Depreciation expense related to property and equipment was $319 thousand, $578 thousand, and $876 thousand for the years ended January 1, 2011, January 2, 2010, and January 3, 2009.

7. Goodwill

The carrying value of goodwill was $0.5 million at January 1, 2011 and $0 at January 2, 2010. Change in goodwill for the year ended January 1, 2011 is presented in the following table (in thousands):

 

     FY 2010
January 1,
2011
     FY 2009
January 2,
2010
 

Balance, beginning of period

   $ —         $ —     

Goodwill as a result of acquisition

     473         —     

Impairment of goodwill

     —           —     
                 

Balance, end of period

   $ 473       $ —     
                 

All of the goodwill recorded as a result of the RetinaLabs acquisition is attributable to our ophthalmology segment. Goodwill is tested for impairment at least annually or whenever there is a change in circumstances that indicates the carrying value of these assets may be impaired. The determination of whether any potential impairment of goodwill exists is based upon a two-step impairment test performed in accordance with ASC 350, Intangibles – Goodwill and Other. There was no impairment of goodwill recognized during fiscal year 2010 and fiscal 2009.

8. Intangible Assets

The purchase method of accounting for acquisitions requires estimates and assumptions to allocate the purchase price to the fair value of net tangible and intangible assets acquired. The amounts allocated to, and the useful lives estimated for, intangible assets, affect future amortization. There are a number of generally accepted valuation methods used to estimate fair value of intangible assets, and we use primarily a discounted cash flow method, which requires significant management judgment to forecast the future operating results and to estimate the discount factors used in the analysis. An asset is considered impaired if its carrying amount exceeds the value of future net cash flow the asset is expected to generate. If an asset is considered to be impaired, the impairment to be recognized is measured by the amount by which the carrying amount of the asset exceeds its fair value.

Future changes in events or circumstances, such as an inability to achieve the cash flows determined above, may indicate that the recorded value of the intangible assets will not be recovered through future cash flows and the Company may be required to record an impairment charge for the intangible assets or further modify the period of expected lives for the intangible assets.

The components of the Company’s purchased intangible assets as of January 1, 2011 are as follows (in thousands):

 

     Useful
Lives
     FY 2010
Annual
Amortization
     Gross
Carrying
Value
     Accumulated
Amortization
     Net
Carrying
Value
     Useful Lives
Remaining
 

Services - Contractual Customer Relationships

     8 Years       $ 163       $ 2,132       $ 1,156       $ 976         6 Years   

Customer Relations

     15 Years         12         240         12         228         14.4 Years   

Patents

     Varies         7         600         7         593         Varies   

Other

     —           14         171         171         —           —     
                                         
      $ 196       $ 3,143       $ 1,346       $ 1,797      
                                         

The components of the Company’s purchased intangible assets as of January 2, 2010 are as follows (in thousands):

 

     Useful
Lives
     FY 2009
Annual
Amortization
     Gross
Carrying
Value
     Accumulated
Amortization
     Net
Carrying
Value
     Useful
Lives
Remaining
 

Services - Contractual Customer Relationships

     8 Years       $ 163       $ 2,132       $ 994       $ 1,138         7 Years   

Trade Name

     1 Year         102         380         380         —           —     

Other

     2 Years         57         171         156         15         1 Year   
                                         
      $ 322       $ 2,683       $ 1,530       $ 1,153      
                                         

 

49


Table of Contents

Aggregate amortization expense for the fiscal years ended January 1, 2011, January 2, 2010, and January 3, 2009 were $196 thousand, $322 thousand, and $2,345 thousand, respectively.

Estimated future amortization expense for purchased intangible assets is as follows (in thousands):

 

Fiscal Year:

  

2011

   $ 239   

2012

     300   

2013

     350   

2014

     416   

2015

     183   

Thereafter

     309   
        

Total

   $ 1,797   
        

9. Accrued Expenses

 

      FY 2010
January 1,
2011
     FY 2009
January 2,
2010
 

The components of the Company’s accrued expenses are as follows (in thousands):

     

Income taxes payable

   $ 253       $ 191   

Sales and use tax payable

     129         98   

Distributor commission

     288         337   

Customer deposits

     247         244   

Other accrued expenses

     905         1,113   
                 

Total accrued expenses

   $ 1,822       $ 1,983   
                 

10. Bank Borrowings

On March 25, 2010, the Company repaid in full all amounts outstanding under its loan agreement with Wells Fargo Bank and terminated the credit facility. Prior to March 25, 2010, the Company had a borrowing agreement with Wells Fargo Bank (the “Agreement”) that provided for an asset-based revolving line of credit of up to $8.0 million secured by a lien on substantially all of the Company’s assets. Interest was set at the greater of 5% or prime as published in the Wall Street Journal, plus 2% on floating rate advances and 3.5% on LIBOR advances, with a minimum monthly interest payment of $20 thousand.

On June 11, 2010, the Company entered into a Loan and Security Agreement (“Loan Agreement”) with Silicon Valley Bank (“Lender”) providing for a $5.0 million secured revolving loan facility, with availability subject to an accounts receivable borrowing base formula in certain circumstances. As of January 1, 2011, no loans have been made or requested under the Loan Agreement.

Borrowings under the revolving loan facility accrue interest at a per annum rate equal to the Lender’s prime rate as in effect from time to time plus a margin, subject to a minimum interest rate of 4.00%. Interest on borrowings under the revolving loan facility is payable monthly. The Company may borrow, repay and reborrow funds under the revolving loan facility until June 11, 2012, at which time the revolving loan facility matures and all outstanding amounts must be repaid. In certain circumstances, the Company may be required to immediately repay principal amounts outstanding when it receives payments on its accounts receivable. On June 11, 2010, the Company paid a non refundable commitment fee of $12,500 and is required to pay a commitment fee of $12,500 on June 11, 2011. In the event the Company elects to terminate the revolving loan facility before the maturity date, the Company is required to pay a fee in the amount of $50,000.

All obligations under the Loan Agreement are secured by substantially all of the property of the Company, excluding the Company’s intellectual property but including any proceeds derived from the Company’s intellectual property.

The Loan Agreement contains covenants that include, among others, covenants that limit the Company’s and its subsidiaries’ ability to dispose of assets, enter into mergers or acquisitions, incur indebtedness, incur liens, pay dividends or make distributions on the Company’s capital stock, make investments or loans, and enter into certain affiliate transactions, in each case subject to customary exceptions for a credit facility of this size and type. The Loan Agreement also contains a financial covenant requiring the Company to maintain a certain adjusted quick ratio. As of January 1, 2011, the Company was in compliance with all the loan covenants.

 

50


Table of Contents

11. Commitments and Contingencies

Lease Agreements.

The Company leases its operating facilities under a noncancelable operating lease. On December 22, 2009, the lease for the Mountain View, CA was amended and renewed to lease for an additional six year period beginning March 1, 2010 until February 28, 2015. The Company also leases office space in Lisses, France. The lease is renewable annually and runs through 2018. The Company leased office space in Cwmbran, South Wales, which terminated in December 2009. Rent expense totaled $657 thousand, $624 thousand and $564 thousand for the fiscal year ended January 1, 2011, January 2, 2010 and January 3, 2009.

Future minimum lease payments under current operating leases at January 1, 2011 are summarized as follows (in thousands):

 

Fiscal Year

   Operating
Lease
Payments
 

2011

   $ 690   

2012

     696   

2013

     710   

2014

     770   

2015

     129   
        

Total future minimum lease payments

   $ 2,995   
        

License Agreements.

The Company is obligated to pay royalties equivalent to 5% and 7.5% of sales on certain products under certain license agreements. Royalty expense was approximately $115 thousand, $102 thousand, and $231 thousand for the fiscal years ended January 1, 2011, January 2, 2010, and January 3, 2009, respectively.

Indemnification Arrangements.

The Company enters into standard indemnification arrangements in our ordinary course of business. Pursuant to these arrangements, the Company indemnifies, holds harmless, and agrees to reimburse the indemnified parties for losses suffered or incurred by the indemnified party, generally our business partners or customers, in connection with any trade secret, copyright, patent or other intellectual property infringement claim by any third party with respect to our products. The term of these indemnification agreements is generally perpetual anytime after the execution of the agreement. The maximum potential amount of future payments the Company could be required to make under these agreements is not determinable. The Company has never incurred costs to defend lawsuits or settle claims related to these indemnification agreements. As a result, the Company believes the estimated fair value of these agreements is minimal.

The Company has entered into indemnification agreements with its directors and officers that may require the Company to indemnify its directors and officers against liabilities that may arise by reason of their status or service as directors or officers, other than liabilities arising from willful misconduct of a culpable nature; to advance their expenses incurred as a result of any proceeding against them as to which they could be indemnified; and to make good faith determination whether or not it is practicable for the Company to obtain directors and officers insurance. The Company currently has directors and officers liability insurance.

In general, management believes that claims which are pending or known to be threatened, will not have a material adverse effect on the Company’s financial position or results of operations and are adequately covered by the Company’s liability insurance. However, it is possible that cash flows or results of operations could be materially affected in any particular period by the unfavorable resolution of one of more of these contingencies or because of the diversion of management’s attention and the incurrence of significant expenses.

12. Stockholders’ Equity

Convertible Preferred Stock

The Company is authorized to issue up to 2,000,000 shares of undesignated preferred stock from time to time in one or more series. During August 2007, the Company filed a Certificate of Designation authorizing the Company to issue up to 500,000 of the 2,000,000 shares of authorized undesignated preferred stock as shares of Series A Preferred Stock, par value $0.01 per share.

In August 2007, the Company issued 500,000 shares of Series A Preferred Stock, convertible into 1 million shares of Common Stock, and warrants to purchase an aggregate of 600,000 shares of Common Stock at an exercise price of $0.01 per share. The warrants were to expire December 31, 2007 but were exercised prior to that date. The purchase price for a unit of 1 share of Series A Preferred Stock and a warrant to purchase 1.2 shares of Common Stock was $10.00, resulting in net proceeds to the Company of approximately $4.9 million. Of the total $4.9 million proceeds received, approximately $2.3 million has been allocated to the common stock warrants based on their estimated fair value at the time of issuance.

 

51


Table of Contents

In the event that the Common Stock of the Company trades on a trading market at or above a closing price equal to $5.00 per share (as adjusted for capital reorganizations, stock splits, reclassifications, etc.) for a period of 30 consecutive trading days, the shares of Series A Preferred Stock shall automatically convert to common stock.

Holders of Series A preferred stock have preferential rights to noncumulative dividends when and if declared by the Board of Directors. In the event of liquidation, the holders have preferential rights to liquidation payments in the amount of the original purchase price plus declared and unpaid dividends, if any. At January 1, 2011, the aggregate liquidation preference was $5,000,000.

In addition, holders of Series A preferred stock have certain registration rights including the requirement that the Company file a Form S-3 registration statement within 90 days of becoming eligible to file a Form S-3 registration statement and the right to request that the Company file a Form S-1 registration statement any time after February 29, 2008.

If the holders notify the Company of their decision to have a registration statement filed, the Company has 90 days to cause the registration statement to be declared effective. If the registration statement is not filed within 90 days, the Company is obligated to pay the holders partial liquidated damages until the registration statement is declared effective. The Company shall pay to each holder an amount in cash equal to 1% of the aggregate purchase price paid for the original units of Series A Preferred Stock and warrants to purchase common stock. The maximum aggregate damages payable to the holders is 12% of the aggregate purchase price paid by the holders. If the Company fails to pay any partial liquidated damages in full within seven days of the date payable, the Company will pay interest thereon at a rate of 18% per annum (or the lesser maximum amount that is permitted to be paid by applicable law) to the holders.

The maximum potential amount of damages that the Company may have to pay the holders is $600,000. The Company regards the probability of having to make this payment to the holders as remote and has therefore not recorded a liability to represent this potential obligation.

During 2009 the holders of the Series A preferred stock and the Company agreed to amend the Form S-3 registration rights. The agreement changed the clause requiring the Company to file a Form S-3 registration statement within 90 days of becoming eligible to a right to request the Company file a Form S-3 registration statement any time after June 30, 2009. In consideration for extending the period during which the Company is not required to file a registration statement, the Company issued the holders of Series A preferred stock warrants to purchase an aggregate of 20,000 shares Common Stock at an exercise price of $0.01 per share. The warrants were exercised in fiscal year 2009. As of January 1, 2011, the Company has not received a request to file a Form S-3.

Stock Option Plans

1998 Stock Plan.

The 1998 Stock Plan (the 1998 Plan), as amended, provides for the granting to employees (including officers and employee directors) of incentive stock options and for the granting to employees (including officers and employee directors) and consultants of nonstatutory stock options, stock purchase rights (SPRs), restricted stock, restricted stock units, performance shares, performance units and stock appreciation rights. The exercise price of incentive stock options and stock appreciation rights granted under the 1998 Plan must be at least equal to the fair market value of the shares at the time of grant. With respect to any recipient who owns stock possessing more than 10% of the voting power of our outstanding capital stock, the exercise price of any option or SPR granted must be at least equal to 110% of the fair market value at the time of grant. Options granted under the 1998 Plan are exercisable at such times and under such conditions as determined by the Administrator; generally over a four year period. The maximum term of incentive stock options granted to any recipient must not exceed ten years; provided, however, that the maximum term of an incentive stock option granted to any recipient possessing more than 10% of the voting power of the Company’s outstanding capital stock must not exceed five years. In the case of SPRs, unless the Administrator determines otherwise, the Company has a repurchase option exercisable upon the voluntary or involuntary termination of the purchaser’s employment with the Company for any reason (including death or disability). Such repurchase option lapses at a rate determined by the Administrator. The purchase price for shares repurchased by the Company is the original price paid by the purchaser. In June of 2006, this plan was amended to shorten the contractual life of all option grants made after June 2006 to a seven year term. As of January 1, 2011 and January 2, 2010, no shares were subject to repurchase. The form of consideration for exercising an option or stock purchase right, including the method of payment, is determined by the Administrator. The 1998 Plan expired in February 2008.

 

52


Table of Contents

Stand-Alone Options.

In February 2007, the Compensation Committee of the Company’s Board of Directors approved the grant of 235,000 non-qualified stock options, outside of the Company’s existing stock plans, to a total of 54 new employees, both domestic and international, hired in connection with the Company’s acquisition of the assets of the aesthetics business of Laserscope. The options were granted as of February 28, 2007 at an exercise price of $10.06 per share. As of January 1, 2011 there were 16,000 shares outstanding and exercisable under these options.

2008 Equity Incentive Plan

On June 11, 2008, the shareholders approved the adoption of the 2008 Equity Incentive Plan, (the Incentive Plan). There are no material changes in the Incentive Plan from the 1998 Stock Plan. The maximum aggregate number of shares that may be awarded and sold under the Incentive Plan is 300,000 shares plus any shares subject to stock options or similar awards granted under the 1998 Stock Plan that expire or otherwise terminate without having been exercised in full and shares issued pursuant to awards granted under the 1998 Stock Plan that are forfeited to the Company on or after the date the 1998 Stock Plan expires. The terms of the awards granted under the Incentive Plan are consistent with those described under the 1998 Stock Plan.

Exchange Program

In August 2009, we completed a one-time stock exchange program to exchange certain employee stock options issued under the 1998 Plan, the Incentive Plan or in connection with IRIDEX’s acquisition of the assets of the aesthetics business of Laserscope for stock options issued under the Incentive Plan (the “Exchange Program”). The exchange offer was made to employees of the Company who, as the date of the exchange offer commenced, were actively employed. Members of our board of directors and our executive officers who are subject to the provisions of Section 16 of the Securities 1934 Exchange Act were not eligible to participate. The number of options held by eligible employees at the date of commencement was 663,018. Seventy two eligible employees surrendered 364,162 options in exchange for 197,116 new options. These new options were granted pursuant to the Exchange Program and have an exercise price of $2.35 per share, the closing price of IRIDEX common stock as reported by Nasdaq on August 27, 2009.

The exchange of original options for new options was treated as a modification of the original options. As such, the Company will continue to recognize compensation cost for the incremental difference between the fair value of the new option and the fair value of the original options immediately before modification, reflecting the current facts and circumstances on the modification date, in addition to the compensation cost being incurred for the original options, over the vesting term of the new options. The Exchange resulted in an incremental expense of approximately $38 thousand which is being recognized over the vesting periods of the new options which ranges from 6 months to 3 years.

The following table summarizes information regarding activity in our stock option plans during the fiscal years ended 2010, 2009 and 2008:

Information with respect to activity under these option plans are set forth below (in thousands except share and per share data):

 

           Outstanding Options  
     Shares
Available
for Grant
    Number
of Shares
    Aggregate
Price
    Weighted
Average
Exercise
Price
 

FY 2007: Balances, December 29, 2007

     337,959        1,859,537        11,323      $ 6.09   

Additional shares reserved

     568,863        —          —          —     

Options granted

     (686,712     686,712        1,605      $ 2.34   

Options exercised

     —          —          —          —     

Options cancelled

     494,434        (494,434     (3,052   $ 6.18   

Options expired

     (448,581     —          —          —     
                                

FY 2008: Balances, January 3, 2009

     265,963        2,051,815        9,876      $ 4.81   

Additional shares reserved

     872,735        —          —          —     

Options granted

     (280,416     280,416        643      $ 2.29   

Options exercised

     —          (4,059     (6   $ 1.43   

Options cancelled

     744,664        (744,664     (4,344   $ 5.79   

Options expired

     (740,789     —          —          —     
                                

FY 2009: Balances, January 2, 2010

     862,157        1,583,508      $ 6,169      $ 3.91   

Additional shares reserved

     93,299        —          —          —     

Options granted

     (195,800     195,800        780      $ 3.98   

Options exercised

     —          (34,558     (88   $ 2.54   

Options cancelled

     126,684        (126,684     (955   $ 7.54   

Options expired

     (126,203     —          —          —     
                                

FY 2010: Balances, January 1, 2011

     760,137        1,618,066      $ 5,906      $ 3.65   
                                

 

53


Table of Contents

As of January 1, 2011, January 2, 2010, and January 3, 2009, options to purchase 1,618,066, 1,583,508, and 2,051,815 shares of common stock were outstanding at a weighted average exercise price of $3.65, $3.91, and $4.81, respectively. There were 2,378,203 shares reserved for future issuance under the stock option plans at January 1, 2011.

The following table summarizes information with respect to stock options outstanding and exercisable at January 1, 2011:

 

     Options Outstanding      Options Vested and Exercisable  

Range of Exercise Prices

   Number of
Shares
Outstanding
at January 1,
2011
     Weighted
Average
Remaining
Contractual
Life (Years)
     Weighted
Average
Exercise
Price
     Number of
Shares
Exercisable at
January 1,
2011
     Weighted
Average
Exercise
Price
     Weighted
Average
Remaining
Contractual
Life (Years)
 

$0.82- $0.86

     10,925         5.14       $ 0.83         4,011       $ 0.83         5.14   

$0.90 - $0.90

     189,258         4.94       $ 0.90         91,400       $ 0.90         4.95   

$0.99 - $2.34

     73,800         5.05       $ 2.21         50,474       $ 2.23         5.10   

$2.35 - $2.35

     180,131         3.14       $ 2.35         152,397       $ 2.35         3.22   

$2.38 - $2.52

     165,304         4.26       $ 2.47         118,151       $ 2.48         4.20   

$2.78 - $3.40

     243,962         4.29       $ 3.11         151,659       $ 3.14         3.98   

$3.41 - $4.01

     162,973         2.69       $ 3.67         137,386       $ 3.65         2.16   

$4.05 - $4.43

     179,423         4.86       $ 4.29         73,225       $ 4.20         2.84   

$4.47 - $5.56

     224,169         3.54       $ 5.27         224,169       $ 5.27         3.54   

$5.66 - $10.06

     188,121         2.96       $ 7.56         186,287       $ 7.55         2.97   
                                                     

$0.82 - $10.06

     1,618,066         3.92       $ 3.65         1,189,159       $ 3.97         3.51   
                                                     

The determination of fair value of all options granted by the Company is computed based on the Black-Scholes option-pricing model with the following weighted average assumptions:

 

     Employee Stock Option Plan
     FY 2010   FY 2009   FY 2008

Average risk free interest rate

     2.03%       1.76%     2.7%

Expected life (in years)

   4.75 years   3.35 years   4.75 years

Dividend yield

   —     —     —  

Average volatility

   88.2.0%   104.0%   71.9%

Option-pricing models require the input of various subjective assumptions, including the option’s expected life and the price volatility of the underlying stock. The expected stock price volatility is based on analysis of the Company’s stock price history over a period commensurate with the expected term of the options, trading volume of the Company’s stock, look-back volatilities and Company specific events that affected volatility in a prior period. The Company has elected to use the simplified method for estimating the expected term. The risk-free interest rate is based on the U.S. Treasury yield curve in effect at the time of grant. No dividend yield is included as the Company has not issued any dividends and does not anticipate issuing any dividends in the future.

The following table shows stock-based compensation expense included in the Consolidated Statements of Operations for 2010, 2009 and 2008 (in thousands):

 

     FY 2010
Year Ended
January 1, 2011
     FY 2009
Year Ended
January 2, 2010
     FY 2008
Year Ended
January 3, 2009
 

Cost of revenues

   $ 115       $ 146       $ 152   

Research and development

     93         79         85   

Sales and marketing

     128         76         65   

General and administrative

     215         59         20   
                          
   $ 551       $ 360       $ 322   
                          

 

54


Table of Contents

Approximately $6 thousand, $7 thousand and $7 thousand of the stock based compensation expense recognized was capitalized into inventory as a component of overhead at January 1, 2011, January 2, 2010 and January 3, 2009, respectively.

Information regarding stock options outstanding, exercisable and expected to vest at January 1, 2011 is summarized below:

 

     Number of
Shares
     Weighted Average
Exercise Price
     Weighted Average
Remaining Contractual
Life (Years)
     Aggregate
Intrinsic Value
(thousands)
 

FY 2010: As of January 1, 2011

           

Options outstanding

     1,618,066       $ 3.65         3.92       $ 1,491   

Options vested and expected to vest

     1,512,825       $ 3.72         3.84       $ 1,344   

Options exercisable

     1,189,159       $ 3.97         3.47       $ 939   

The weighted average grant date fair value of option granted during 2010 as calculated using Black-Scholes was $2.70 per share.

The aggregate intrinsic value in the table above represents the total pretax intrinsic value (the difference between the Company’s closing stock price on the last trading day of fiscal 2010 and the exercise price, multiplied by the number of in-the-money options) that would have been received by the option holders had all option holders exercised their options on January 1, 2011. This amount changes based on the fair market value of the Company’s stock. The total intrinsic value of options exercised during the years ended January 1, 2011, January 2, 2010 and January 3, 2009 were approximately $46 thousand, $5 thousand and $0, respectively.

As of January 1, 2011, there were $894 thousand of total unrecognized compensation cost related to non-vested share-based compensation arrangements under both of the plans. The cost is expected to be recognized over a weighted average period of 2.11 years.

13. Employee Benefit Plan

The Company has a plan known as the IRIS Medical Instruments 401(k) Trust to provide retirement benefits through the deferred salary deductions for substantially all US employees. Employees may contribute up to 15% of their annual compensation to the plan, limited to a maximum amount set by the Internal Revenue Service. The plan also provides for Company contributions at the discretion of the Board of Directors. On April 1, 2000, the Company commenced a Company match for the 401(k) in the amount of 50% of employee contributions up to an annual maximum of $2 thousand per year. Prior to the start of fiscal 2009, the Company suspended the matching contributions. It is not known at this time when such matching contributions will be reinstated. The Company contributions totaled $0 in 2010, $0 in 2009, and $214 thousand in 2008.

14. Income Taxes

Pre-tax book income (loss) was comprised of the following:

 

     FY 2010
Year
Ended

January 1,
2011
    FY 2009
Year
Ended

January 2,
2010
    FY 2008
Year
Ended

January 3,
2009
 

United States

   $ 4,044      $ 3,487      $ (7,049

Foreign

     (525     (406     (194
                        

Total

   $ 3,519      $ 3,081      $ (7,243
                        

The provision for (benefit from) income taxes includes:

 

     FY 2010
Year Ended
January 1,
2011
    FY 2009
Year Ended
January 2,
2010
    FY 2008
Year Ended
January 3,
2009
 

Current:

      

Federal

   $ 513      $ 581      $ 87   

State

     33        56        40   

Foreign

     (73     (141     —     
                        
     473        496        127   
                        

Deferred:

      

Federal

     —          —          —     

State

     —          —          —     
     —          —          —     
                        

Income tax provision

   $ 473      $ 496      $ 127   
                        

 

55


Table of Contents

The Company’s effective tax rate differs from the statutory federal income tax rate as shown in the following schedule:

 

     FY 2010
Year Ended
January 1,
2011
    FY 2009
Year Ended
January 2,
2010
    FY 2008
Year Ended
January 3,
2009
 

Income tax provision at statutory rate

     34     34     34

State income taxes, net of federal benefit

     1     4     5

Nondeductible permanent differences

     0     6     (3 %) 

Research and development credits

     (2 %)      (2 %)      1

Change in valuation allowance

     (19 %)      (26 %)      (40 %) 

Foreign rate differential

     (1 %)      0     1
                        

Effective tax rate

     13     16     (2 %) 
                        

The tax effect of temporary differences and carry-forwards that give rise to significant portions of the net deferred tax assets are presented below (in thousands):

 

     FY 2010
January 1,
2011
    FY 2009
January 2,
2010
 

Accruals and reserves

   $ 2,891      $ 2,619   

Deferred revenue

     104        281   

Fixed assets

     587        654   

Intangibles

     7,304        7,900   

Stock compensation

     612        445   

Net operating loss

     120        120   

Research and development credits

     459        710   

Other tax credits

     37        37   
                

Net deferred tax asset

   $ 12,114      $ 12,766   

Valuation allowance

     (12,114     (12,766
                

Net deferred tax assets

   $ 0      $ 0   
                

The Company has taxable income in 2010. While the Company has a recent history of income it is still in a position of a three year cumulative loss which is significant negative evidence against the realizability of its deferred tax assets. Management feels that it is not more likely than not that the Company will be able to realize its deferred tax assets, and as such continues to record a full valuation allowance against deferred tax assets.

During the year ended January 2, 2010, the Company utilized its entire federal net operating loss. As of January 1, 2011, the Company had State net operating loss (“NOL”) carry forwards of $3.3 million. Of the total state NOL’s, $1.3 million relates to windfall stock option deductions which, when realized, will be credited to equity. The state losses will begin to expire in 2018. The state of California has suspended the ability of companies to utilize their net operating losses for tax year’s 2010 and 2011.

As of January 1, 2011, the Company had Federal and State research credit carry forwards of approximately $0.5 million and $1.2 million, respectively, available to offset future tax liabilities. The Federal credits will begin expiring in 2020 if not used. The state research credits do not expire.

The Company also has $37 thousand of alternative minimum tax credits which do not expire and can be used to offset regular tax at a future date.

The above net operating losses and research and development credits are subject to IRC sections 382 and 383. In the event of a change in ownership as defined by these code sections, the usage of the above mentioned NOL’s and credits may be limited.

The Company accounts for uncertain tax positions in accordance with ASC 740, Income Taxes. ASC 740 seeks to reduce the diversity in practice associated with certain aspects of measurement and recognition in accounting for income taxes. ASC 740 prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax provision that an entity takes or expects to take in a tax return. Additionally, ASC 740 provides guidance on de-recognition, classification, interest and penalties, accounting in interim periods, disclosures, and transition. Under ASC 740, an entity may only recognize or continue to recognize tax positions that meet a “more likely than not” threshold. In accordance with our accounting policy, we recognize accrued interests and penalties related to unrecognized tax benefits as a component of income tax expense.

 

56


Table of Contents

As of January 1, 2011, the Company had accrued $67 thousand for payment of interest and penalties related to unrecognized tax benefits.

A reconciliation of the beginning and ending amount of unrecognized tax benefits is as follows (in thousands):

 

     FY 2010
Year Ended
January 1,
2011
     FY 2009
Year Ended
January 2,
2010
 

Balance at the beginning of the year

   $ 637       $ 585   

Additions based upon tax positions related to the current year

     67         52   

Additions based upon tax positions related to the prior year

     161         —     
                 

Balance at the end of the year

   $ 865       $ 637   
                 

If the ending balance of $865 thousand of unrecognized tax benefits at January 1, 2011 were recognized, $55 thousand of the recognition would affect the income tax rate. The Company does not anticipate any material change in its unrecognized tax benefits of $810 thousand over the next twelve months. The unrecognized tax benefits may change during the next year for items that arise in the ordinary course of business.

The Company files U.S. federal and state returns as well as foreign returns in France and the UK. The tax years 2001 to 2010 remain open in several jurisdictions, none of which have individual significance.

15. Major Customers and Business Segments

The Company operates in two reportable segments: the ophthalmology segment and the aesthetics segment. In both segments, the Company develops, manufactures and markets medical devices. Our revenues arise from the sale of consoles, delivery devices, consumables and service and support activities.

In the years ended January 1, 2011, January 2, 2010, and January 3, 2009, no customer individually accounted for more than 10% of our revenue.

Revenue information shown by geographic region is as follows (in thousands):

 

     FY 2010
Year Ended
January 1,
2011
     FY 2009
Year Ended
January 2,
2010
     FY 2008
Year Ended
January 3,
2009
 

United States

   $ 24,130       $ 25,032       $ 26,959   

Europe

     11,169         12,156         14,809   

Rest of Americas

     2,615         1,881         2,584   

Asia/Pacific Rim

     5,780         4,143         4,176   
                          
   $ 43,694       $ 43,212       $ 48,528   
                          

Revenues are attributed to countries based on location of end customers. In the years ended January 1, 2011, January 2, 2010, and January 3, 2009, no individual country accounted for more than 10% of the Company’s sales, except for the United States, which accounted for 55.2%, 57.9%, and 55.6% of sales in 2010, 2009, and 2008 respectively.

Information on reportable segments for the three years ended January 1, 2011, January 2, 2010, and January 3, 2009 is as follows (in thousands):

 

     FY 2010: Year Ended January 1, 2011  
     Ophthalmology      Aesthetics      Total  

Revenues

   $ 32,308       $ 11,386       $ 43,694   

Direct cost of revenues

     9,412         3,334         12,746   
                          

Direct gross profit

   $ 22,896       $ 8,052         30,948   

Total unallocated indirect costs

           (28,151
              

Income from operations

         $ 2,797   
              

 

     FY 2009: Year Ended January 2, 2010  
     Ophthalmology      Aesthetics      Total  

Revenues

   $ 31,032       $ 12,180       $ 43,212   

Direct cost of revenues

     8,663         4,070         12,733   
                          

Direct gross profit

   $ 22,369       $ 8,110         30,479   

Total unallocated indirect costs

           (27,961
              

Income from operations

         $ 2,518   
              

 

     FY 2008: Year Ended January 3, 2009  
     Ophthalmology      Aesthetics      Total  

Revenues

   $ 32,387       $ 16,141       $ 48,528   

Direct cost of revenues

     9,197         6,638         15,835   
                          

Direct gross profit

   $ 23,190       $ 9,503         32,693   

Impairment of goodwill and intangible assets

        5,364         5,364   

Total unallocated indirect costs

           34,865   
              

Loss from operations

         $ (7,536
              

 

57


Table of Contents

Direct cost of revenues includes standard product cost (direct material, labor & fringe benefits) and any warranty and unit royalty costs. Indirect costs of manufacturing, service, research and development, selling and marketing, general and administrative costs are not allocated to the segments. The Company’s assets and liabilities are not evaluated on a segment basis. Accordingly, no disclosure on segment assets and liabilities is provided.

16. Computation of Basic and Diluted Net Income (Loss) Per Common Share

A reconciliation of the numerator and denominator of basic and diluted net income (loss) per common share is provided as follows (in thousands, except per share amounts):

 

     FY 2010
Year Ended
January 1,
2011
     FY 2009
Year Ended
January 2,
2010
     FY 2008
Year Ended
January 3,
2009
 

Numerator:

        

Net income (loss) – basic and diluted

   $ 3,046       $ 2,585       $ (7,370

Denominator:

        

Basic weighted average shares outstanding

     8,943         8,840         8,824   

Effect of dilutive preferred shares

     1,000         1,000         —     

Effect of dilutive stock options

     183         100         —     

Effect of dilutive contingent shares

     8         —           —     
                          

Diluted weighted average shares outstanding

     10,134         9,940         8,824   
                          

Basic net income (loss) per common share

   $ 0.34       $ 0.29       $ (0.84
                          

Diluted net income (loss) per common share

   $ 0.30       $ 0.26       $ (0.84
                          

The Company excludes options from the computation of diluted weighted average shares outstanding if the exercise price of the options is greater than the average market price of the shares because the inclusion of these options would be anti-dilutive to earnings per share. Accordingly, at January 1, 2011 and January 2, 2010, respectively, stock options to purchase 809,997 and 1,581,662 shares were excluded from the computation of diluted weighted average shares outstanding.

In net loss periods, the basic and diluted weighted average shares of common stock and common stock equivalents are the same because inclusion of common stock equivalents would be anti-dilutive. Accordingly, at January 3, 2009 there was no difference between the denominators used for the calculation of basic and diluted net income (loss) per share. At January 3, 2009, there were 1,951,971 anti-dilutive options excluded from the net loss per share calculation.

On March 2, 2011, the Company purchased 75,698 shares of IRIDEX Common Stock from American Medical Systems Holdings, Inc. (AMS). These shares were the remaining holdings of IRIDEX Common Stock that were issued to AMS as part of the consideration for a 2007 transaction in which laser technologies and assets were purchased by IRIDEX from AMS.

17. Subsequent Event

On March 2, 2011, the Company purchased 75,698 shares of IRIDEX Common Stock from American Medical Systems Holdings, Inc. (AMS) at $4.00 per share, totaling $303 thousand. These shares were the remaining holdings of IRIDEX Common Stock that were issued to AMS as part of the consideration for a 2007 transaction in which laser technologies and assets were purchased by IRIDEX from AMS.

 

58


Table of Contents

The Company has evaluated subsequent events and has concluded that no subsequent events other than the one mentioned above have occurred since the year ended January 1, 2011 that required additional disclosure in the consolidated financial statements.

18. Selected Quarterly Financial Data, (Unaudited)

 

     Quarter  
     First      Second      Third      Fourth  
     (In thousands, except per share amounts)  

FY 2010: Year Ended January 1, 2011

           

Sales

   $ 10,758       $ 9,890       $ 10,818       $ 12,228   

Gross profit

   $ 5,225       $ 4,536       $ 5,249       $ 5,893   

Net income

   $ 485       $ 814       $ 910       $ 837   

Basic net income per common share

   $ 0.05       $ 0.09       $ 0.10       $ 0.09   

Diluted net income per common share

   $ 0.05       $ 0.08       $ 0.09       $ 0.08   

FY 2009: Year Ended January 2, 2010

           

Sales

   $ 10,736       $ 10,513       $ 10,400       $ 11,563   

Gross profit

   $ 5,048       $ 4,829       $ 5,122       $ 5,274   

Net income

   $ 224       $ 1,198       $ 646       $ 517   

Basic net income per common share

   $ 0.03       $ 0.13       $ 0.07       $ 0.06   

Diluted net income per common share

   $ 0.02       $ 0.12       $ 0.07       $ 0.05   

 

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

Not applicable.

 

Item 9A. Controls and Procedures

Evaluation of Disclosure Controls and Procedures.

Our management, with the participation of our Chief Executive Officer and Chief Financial Officer, evaluated the effectiveness of our disclosure controls and procedures pursuant to Rule 13a-15 under the Exchange Act. In designing and evaluating our disclosure controls and procedures, management recognizes that disclosure controls and procedures, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the disclosure controls and procedures are met. Additionally, in designing disclosure controls and procedures, our management necessarily was required to apply its judgment in evaluating the cost-benefit relationship of possible disclosure controls and procedures. The design of any disclosure controls and procedures also is based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions.

Based on management’s evaluation, our Chief Executive Officer and Chief Financial Officer concluded that, as of January 1, 2011, our disclosure controls and procedures are designed at a reasonable assurance level and are effective to provide reasonable assurance that information we are required to disclose in reports that we file or submit under the Exchange Act is recorded, processed, summarized, and reported within the time periods specified in SEC rules and forms, and that such information is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosure.

Management’s Report on Internal Control over Financial Reporting.

Our management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rule 13a-15(f) of the Exchange Act. Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Under the supervision and with the participation of management, including our Chief Executive Officer and Chief Financial Officer, we conducted an evaluation of the effectiveness of our internal control over financial reporting as of January 1, 2011 using the criteria for effective internal control over financial reporting as described in “Internal Control - Integrated Framework,” issued by the Committee of Sponsoring Organization of the Treadway Commission. Based on their evaluation as of the end of the period covered by this Annual Report on Form 10-K, our Chief Executive Officer and Chief Financial Officer have concluded that our internal control over financial reporting was effective as of January 1, 2011.

 

59


Table of Contents

This Annual Report on Form 10-K does not include an attestation report of our independent registered public accounting firm regarding internal control over financial reporting. Management’s report is not subject to attestation by our independent registered public accounting firm.

Changes in Internal Control over Financial Reporting.

There were no changes in our internal control over financial reporting that occurred during the fourth quarter of fiscal year 2010 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

 

Item 9B. Other Information

Not applicable.

 

60


Table of Contents

PART III

Certain information required by Part III has been omitted from this Form 10-K. This information is instead incorporated herein by reference to our definitive Proxy Statement for our 2011 Annual Meeting of Stockholders (the Proxy Statement), which we will file within 120 days after the end of our fiscal year pursuant to Regulation 14A in time for our Annual Meeting of Stockholders to be held June 15, 2011.

 

Item 10. Directors and Executive Officers and Corporate Governance

Information regarding our directors is incorporated herein by reference to “Proposal One - Election of Directors - Nominees” in our Proxy Statement. The information concerning our current executive officers is incorporated herein by reference to “Executive Officers” in our Proxy Statement. Information regarding delinquent filers is incorporated by reference to “Section 16(a) Beneficial Ownership Reporting Compliance” in our Proxy Statement. Information regarding our code of business conduct and ethics is incorporated herein by reference to “Proposal One - Election of Directors - Corporate Governance Matters - Code of Business Conduct and Ethics” in our Proxy Statement.

 

Item 11. Executive Compensation

The information required by this item is incorporated herein by reference to “Executive Compensation” in our Proxy Statement.

 

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

The information required by this Item is incorporated herein by reference to “Security Ownership of Certain Beneficial Owners and Management” in our Proxy Statement.

 

Item 13. Certain Relationships and Related Transactions, and Director Independence

The information required by this Item is incorporated herein by reference to “Certain Relationships and Related Transactions” in our Proxy Statement.

 

Item 14. Principal Accountant Fees and Services.

The information required by this item is incorporated herein by reference to “Proposal Two - Ratification of Appointment of Independent Accountants” in our Proxy Statement.

 

61


Table of Contents

PART IV

 

Item 15. Exhibits, Financial Statement Schedules and Reports on Form 8-K

The following documents are filed in Part II of this Annual Report on Form 10-K:

 

     Page in
Form 10-K
Report
 
1. Financial Statements   

Report of Independent Registered Public Accounting Firm

     36   

Consolidated Balance Sheets as of January 1, 2011 and January 2, 2010

     37   

Consolidated Statements of Operations for the years ended January 1, 2011, January  2, 2010 and January 3, 2009

     38   

Consolidated Statements of Comprehensive Income (Loss) for the years ended January 1, 2011,  January 2, 2010 and January 3, 2009

     38   

Consolidated Statements of Stockholders’ Equity for the years ended January 1, 2011,  January 2, 2010 and January 3, 2009

     39   

Consolidated Statements of Cash Flows for the years ended January 1, 2011, January  2, 2010 and January 3, 2009

     40   

Notes to Consolidated Financial Statements

     41   
2. Financial Statement Schedule   

The following financial statement schedule of IRIDEX Corporation for the years ended January 1, 2011, January 2, 2010 and January 3, 2009 is filed as part of this Annual Report and should be read in conjunction with the Consolidated Financial Statements of IRIDEX Corporation

    

Schedule II - Valuation and Qualifying Accounts      65   

Other schedules have been omitted because they are either not required, not applicable, or the required information is included in the consolidated financial statements or notes thereto.

3. Exhibits

Exhibit Index

 

Exhibits

  

Exhibit Title

3.1(1)      Amended and Restated Certificate of Incorporation of Registrant.
3.2(2)      Amended and Restated Bylaws of Registrant.
4.1(3)      Certificate of Designation, Preferences and Rights of Series A Preferred Stock.
4.2(3)      Investor Rights Agreement, dated as of August 31, 2007, by and among the Company, BlueLine Capital Partners, LP; BlueLine Capital Partners III, LP and BlueLine Capital Partners II, LP.
4.3(4)      Amendment No. 1 to Investor Rights Agreement, dated as of March 31, 2009.
10.1(1)        Form of Indemnification Agreement with directors and officers.
10.2(5)        Lease Agreement dated December 6, 1996 by and between Zappettini Investment Co. and the Registrant, as amended pursuant to Amendment No. 1 dated September 15, 2003 and Amendment No. 2 dated December 22, 2008.
10.3(6)*      1995 Director Option Plan.
10.4(7)*      1998 Stock Plan.
10.5(8)*      2005 Employee Stock Purchase Plan.
10.6(7)*      2008 Equity Incentive Plan.
10.6(9)*      Form of 2008 Equity Incentive Plan Option Agreement.
10.8(10)*          Form of Stand-alone stock option agreement.
10.9(5)*        Change of Control Severance Agreement by and between the Company and James Mackaness, dated January 22, 2008.
10.10(11)    Settlement Agreement, dated April 6, 2007, by and among Synergetics, Inc., Synergetics USA, Inc. and IRIDEX Corporation.
10.11(3)    Securities Purchase Agreement, dated August 31, 2007, by and among BlueLine Capital Partners, LP, BlueLine Capital Partners III, LP, BlueLine Capital Partners II, LP and IRIDEX Corporation.
10.12(12)    Loan and Security Agreement, dated as of June 11, 2010, between Silicon Valley Bank and the Company.

 

62


Table of Contents
10.13(4)    Common Stock Purchase Warrant, dated March 31, 2009, issued to BlueLine Capital Partners, LP.
10.14(4)     Common Stock Purchase Warrant, dated March 31, 2009, issued to BlueLine Capital Partners II, LP.
10.15(4)     Common Stock Purchase Warrant, dated March 31, 2009, issued to BlueLine Capital Partners II, LP.
10.16(13)*      2010 Employee Incentive Program Summary.
10.17(14)*      2011 Bonus Plan Summary.
21.1(1)    Subsidiaries of Registrant.
23.1    Consent of Burr Pilger Mayer Inc., Independent Registered Public Accounting Firm.
24.1    Power of Attorney (See page 65).
31.1    Certification of Chief Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
31.2    Certification of Chief Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
32.1    Certification of Chief Executive Officer pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
32.2    Certification of Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

 

* Indicates a management contract or compensatory plan or arrangement.
(1) Incorporated by reference to the Exhibits filed with the Registration Statement on Form SB-2 (No. 333-00320-LA) which was declared effective on February 15, 1996.
(2) Incorporated by reference to the Exhibits filed with the Registrant’s Report on Form 8-K on November 21, 2007.
(3) Incorporated by reference to the Exhibits filed with the Registrant’s Report on Form 8-K on September 7, 2007.
(4) Incorporated by reference to the Exhibits filed with the Registrant’s Report on Form 8-K on April 6, 2009.
(5) Incorporated by reference to the Exhibits filed with the Registrant’s Report on Form 10-K for the year ended January 3, 2009.
(6) Incorporated by reference to Exhibit 10.3 filed with the Registrant’s Registration Statement on Form S-8 on August 3, 2004.
(7) Incorporated by reference to the definitive proxy statement on Schedule 14A filed on May 4, 2009.
(8) Incorporated by reference to the appendix filed with the Registrant’s Proxy Statement for the Company’s 2004 Annual Meeting of Stockholders which was filed on April 30, 2004.
(9) Incorporated by reference to Exhibit 99.1 filed with Registrant’s Registration Statement on Form S-8 on November 21, 2008.
(10) Incorporated by reference to Exhibit 99.(d)(5) filed with the Registration Statement on Form SC TO-I July 30, 2009.
(11) Incorporated by reference to Exhibit 10.1 filed with the Registrant’s Report on Form 10-Q for the quarter ended June 30, 2007.
(12) Incorporated by reference to Exhibit 10.1 filed with the Registrant’s Report on Form 8-K on June 16, 2010.
(13) Incorporated by reference to Exhibit 99.1 filed with the Registrant’s Report on Form 8-K on December 15, 2009.
(14) Incorporated by reference to Exhibit 99.1 filed with the Registrant’s Report on Form 8-K on March 10, 2011.

 

63


Table of Contents

Trademark Acknowledgments

IRIDEX, the IRIDEX logo, IRIS Medical, OcuLight, SmartKey, EndoProbe, Apex, Aura, Lyra, Gemini, Venus, Coolspot and Dermastat are our registered trademarks. G-Probe, DioPexy, DioVet, TruFocus, TrueCW, DioLite, IQ 810, IQ 577, MicroPulse, OtoProbe, ScanLite, Symphony, VariLite and EasyFit product names are our trademarks. All other trademarks or trade names appearing in this Annual Report on Form 10-K are the property of their respective owners.

 

64


Table of Contents

Schedule I1

IRIDEX CORPORATION AND SUBSIDIARIES

VALUATION AND QUALIFYING ACCOUNTS

(in thousands)

 

Description

   Balance at
Beginning of
The Period
     Additions      Deductions     Balance
at End  of
The Period
 

FY 2008: Balance for the year ended January 3, 2009:

          

Allowance for doubtful accounts receivable

   $ 700       $ 410       $ (201   $ 909   

Provision for inventory

   $ 4,630       $ 5,894       $ (4,073   $ 6,451   

FY 2009: Balance for the year ended January 2, 2010:

          

Allowance for doubtful accounts receivable

   $ 909       $ 130       $ (285   $ 754   

Provision for inventory

   $ 6,451       $ 1,288       $ (2,588   $ 5,151   

FY 2010: Balance for the year ended January 1, 2011:

          

Allowance for doubtful accounts receivable

   $ 754       $ 30       $ (415   $ 369   

Provision for inventory

   $ 5,151       $ 570       $ (1,334   $ 4,387   

 

65


Table of Contents

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized, in the City of Mountain View, State of California, on the 24th day of March 2011.

 

IRIDEX CORPORATION
By:   /S/    THEODORE A. BOUTACOFF        
 

Theodore A. Boutacoff

President and Chief Executive Officer

KNOW ALL PERSONS BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints Theodore A. Boutacoff and James H. Mackaness, jointly and severally, their attorney-in-fact, each with full power of substitution, for him in any and all capacities, to sign on behalf of the undersigned any amendments to this Annual Report on Form 10-K, and to file the same, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, and each of the undersigned does hereby ratifying and confirming all that each of said attorneys-in-fact, or his substitutes, may do or cause to be done by virtue hereof.

Pursuant to the requirements of the Securities Act of 1934, this report has been signed by the following persons in the capacities and on the dates indicated.

 

Signature

  

Title

 

Date

/s/    THEODORE A. BOUTACOFF        

(Theodore A. Boutacoff)

  

President, and Chief Executive Officer

(Principal Executive Officer)

  March 24, 2011

/s/    JAMES H. MACKANESS        

(James H. Mackaness)

  

Chief Financial Officer
(Principal Financial and

Accounting Officer)

  March 24, 2011

/s/    SANFORD FITCH        

(Sanford Fitch)

   Director   March 24, 2011

/s/    GARRETT A. GARRETTSON        

(Garrett A. Garrettson)

   Director   March 24, 2011

/s/    JAMES B. HAWKINS        

(James B. Hawkins)

   Director   March 24, 2011

/s/    WILLIAM M. MOORE        

(William M. Moore)

   Chairman of the Board   March 24, 2011

/s/    RUËDIGER NAUMANN-ETIENNE        

(Ruëdiger Naumann-Etienne)

   Director   March 24, 2011

 

66


Table of Contents

Exhibit Index

 

Exhibits

 

Exhibit Title

3.1(1)   Amended and Restated Certificate of Incorporation of Registrant.
3.2(2)   Amended and Restated Bylaws of Registrant.
4.1(3)   Certificate of Designation, Preferences and Rights of Series A Preferred Stock.
4.2(3)   Investor Rights Agreement, dated as of August 31, 2007, by and among the Company, BlueLine Capital Partners, LP; BlueLine Capital Partners III, LP and BlueLine Capital Partners II, LP.
4.3(4)   Amendment No. 1 to Investor Rights Agreement, dated as of March 31, 2009.
10.1(1)   Form of Indemnification Agreement with directors and officers.
10.2(5)   Lease Agreement dated December 6, 1996 by and between Zappettini Investment Co. and the Registrant, as amended pursuant to Amendment No. 1 dated September 15, 2003 and Amendment No. 2 dated December 22, 2008.
10.3(6)*   1995 Director Option Plan.
10.4(7)*   1998 Stock Plan.
10.5(8)*   2005 Employee Stock Purchase Plan.
10.6(7)*   2008 Equity Incentive Plan.
10.6(9)*   Form of 2008 Equity Incentive Plan Option Agreement.
10.8(10)*   Form of Stand-alone stock option agreement.
10.9(5)*   Change of Control Severance Agreement by and between the Company and James Mackaness, dated January 22, 2008.
10.10(11)   Settlement Agreement, dated April 6, 2007, by and among Synergetics, Inc., Synergetics USA, Inc. and IRIDEX Corporation.
10.11(3)   Securities Purchase Agreement, dated August 31, 2007, by and among BlueLine Capital Partners, LP, BlueLine Capital Partners III, LP, BlueLine Capital Partners II, LP and IRIDEX Corporation.
10.12(12)   Loan and Security Agreement, dated as of June 11, 2010, between Silicon Valley Bank and the Company.
10.13(4)   Common Stock Purchase Warrant, dated March 31, 2009, issued to BlueLine Capital Partners, LP.
10.14(4)   Common Stock Purchase Warrant, dated March 31, 2009, issued to BlueLine Capital Partners II, LP.
10.15(4)   Common Stock Purchase Warrant, dated March 31, 2009, issued to BlueLine Capital Partners II, LP.
10.16(13)*   2010 Employee Incentive Program Summary.
10.17(14)*   2011 Bonus Plan Summary.
21.1(1)   Subsidiaries of Registrant.
23.1   Consent of Burr Pilger Mayer Inc., Independent Registered Public Accounting Firm.
24.1   Power of Attorney (See page 65).
31.1   Certification of Chief Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
31.2   Certification of Chief Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
32.1   Certification of Chief Executive Officer pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
32.2             Certification of Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

 

 * Indicates a management contract or compensatory plan or arrangement.
(1) Incorporated by reference to the Exhibits filed with the Registration Statement on Form SB-2 (No. 333-00320-LA) which was declared effective on February 15, 1996.

 

67


Table of Contents
(2) Incorporated by reference to the Exhibits filed with the Registrant’s Report on Form 8-K on November 21, 2007.
(3) Incorporated by reference to the Exhibits filed with the Registrant’s Report on Form 8-K on September 7, 2007.
(4) Incorporated by reference to the Exhibits filed with the Registrant’s Report on Form 8-K on April 6, 2009.
(5) Incorporated by reference to the Exhibits filed with the Registrant’s Report on Form 10-K for the year ended January 3, 2009.
(6) Incorporated by reference to Exhibit 10.3 filed with the Registrant’s Registration Statement on Form S-8 on August 3, 2004.
(7) Incorporated by reference to the definitive proxy statement on Schedule 14A filed on May 4, 2009.
(8) Incorporated by reference to the appendix filed with the Registrant’s Proxy Statement for the Company’s 2004 Annual Meeting of Stockholders which was filed on April 30, 2004.
(9) Incorporated by reference to Exhibit 99.1 filed with Registrant’s Registration Statement on Form S-8 on November 21, 2008.
(10) Incorporated by reference to Exhibit 99.(d)(5) filed with the Registration Statement on Form SC TO-I July 30, 2009.
(11) Incorporated by reference to Exhibit 10.1 filed with the Registrant’s Report on Form 10-Q for the quarter ended June 30, 2007.
(12) Incorporated by reference to Exhibit 10.1 filed with the Registrant’s Report on Form 8-K on June 16, 2010.
(13) Incorporated by reference to Exhibit 99.1 filed with the Registrant’s Report on Form 8-K on December 15, 2009.
(14) Incorporated by reference to Exhibit 99.1 filed with the Registrant’s Report on Form 8-K on March 10, 2011.

 

68

Consent of Burr Pilger Mayer Inc.

Exhibit 23.1

CONSENT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

We hereby consent to the incorporation by reference in the Registration Statements on Forms S-8 (333-161630, 333-155598, 333-147866, 333-135822, 333-127716, 333-117885, 333-107700, 333-97541, 333-67480, 333-45736, 333-86091, 333-57573, 333-32161) of IRIDEX Corporation of our report dated March 24, 2011 related to the consolidated financial statements and financial statement schedules as of January 1, 2011 and January 2, 2010 and for each of the three years in the period ended January 1, 2011 which appear in this Form 10-K.

/s/ Burr Pilger Mayer, Inc.

East Palo Alto, California

March 24, 2011

Certification of Chief Executive Officer pursuant to Section 302

EXHIBIT 31.1

CERTIFICATION OF CHIEF EXECUTIVE OFFICER

PURSUANT TO SECTION 13(a) or 15 (d) OF THE SECURITIES EXCHANGE ACT OF 1934

AS ADOPTED PURSUANT TO

SECTION 302 OF THE SARBANES-OXLEY ACT OF 2002

I, Theodore A. Boutacoff, certify that:

 

  1. I have reviewed this annual report on Form 10-K of IRIDEX Corporation;

 

  2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

 

  3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

 

  4. The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

 

  a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

 

  b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

 

  c) Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

 

  d) Disclosed in this report any changes in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect the registrant’s internal control over financial reporting; and

 

  5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):

 

  a) All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

 

  b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

Date: March 24, 2011

 

By:  

/s/    THEODORE A. BOUTACOFF        

Name:   Theodore A. Boutacoff
Title:   President and Chief Executive Officer
  (Principal Executive Officer)
Certification of Chief Financial Officer pursuant to Section 302

EXHIBIT 31.2

CERTIFICATION OF CHIEF FINANCIAL OFFICER

PURSUANT TO SECTION 13(a) or 15 (d) OF THE SECURITIES EXCHANGE ACT OF 1934

AS ADOPTED PURSUANT TO

SECTION 302 OF THE SARBANES-OXLEY ACT OF 2002

I, James H. Mackaness, certify that:

 

  1. I have reviewed this annual report on Form 10-K of IRIDEX Corporation;

 

  2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

 

  3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

 

  4. The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

 

  a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

 

  b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

 

  c) Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

 

  d) Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect the registrant’s internal control over financial reporting; and

 

  5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):

 

  a) All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

 

  b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

Date: March 24, 2011

 

By:  

/s/    JAMES H. MACKANESS        

Name:   James H. Mackaness
Title:   Chief Financial Officer
  (Principal Financial and Accounting Officer)
Certification of Chief Executive Officer pursuant to 18 U.S.C. Section 1350

EXHIBIT 32.1

CERTIFICATION OF CHIEF EXECUTIVE OFFICER

PURSUANT TO 18 U.S.C. SECTION 1350,

AS ADOPTED PURSUANT TO

SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002

I, Theodore A. Boutacoff, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that the Annual Report of IRIDEX Corporation on Form 10-K for the fiscal year ended January 1, 2011 (i) fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934 and (ii) that information contained in such Annual Report on Form 10-K fairly presents, in all material respects, the financial condition and results of operations of IRIDEX Corporation.

Date: March 24, 2011

 

By:  

/s/    THEODORE A. BOUTACOFF        

Name:   Theodore A. Boutacoff
Title:   President and Chief Executive Officer
 

(Principal Executive Officer)

Certification of Chief Financial Officer pursuant to 18 U.S.C. Section 1350

EXHIBIT 32.2

CERTIFICATION OF CHIEF FINANCIAL OFFICER

PURSUANT TO 18 U.S.C. SECTION 1350,

AS ADOPTED PURSUANT TO

SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002

I, James H. Mackaness, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that the Annual Report of IRIDEX Corporation on Form 10-K for the fiscal year ended January 1, 2011 (i) fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934 and (ii) that information contained in such Annual Report on Form 10-K fairly presents, in all material respects, the financial condition and results of operations of IRIDEX Corporation.

Date: March 24, 2011

 

By:  

/s/    JAMES H. MACKANESS        

Name:   James H. Mackaness
Title:   Chief Financial Officer
  (Principal Financial and Accounting Officer)